DOI QR코드

DOI QR Code

지중 열교환기용 뒤채움재의 물리적 특성 연구

A Study on the Physical Characteristics of Grout Material for Backfilling Ground Heat Exchanger

  • 최항석 (고려대학교 건축사회환경공학과) ;
  • 이철호 (고려대학교 건축사회환경공학과) ;
  • 최효범 ((주)건화 기술연구소) ;
  • 우상백 (대원토질(주))
  • Choi, Hang-Seok (Dept. of Civil, Environmental & Architectural Engrg., Korea Univ.) ;
  • Lee, Chul-Ho (Dept. of Civil, Environmental & Architectural Engrg., Korea Univ.) ;
  • Choi, Hyo-Pum (Research & Development Institute, Kunhwa Co. Ltd.) ;
  • Woo, Sang-Baik (Daewon Soil Co., Ltd.)
  • 발행 : 2008.01.31

초록

지열 냉난방 시스템은 친환경적이며 비고갈성인 지열 에너지를 이용함으로서 에너지 자원이 부족한 우리나라에 유용한 대체 에너지 시스템이다. 본 연구에서는 지중 열교환기의 뒤채움재로 사용되는 그라우트 재료의 열전달 및 점도 특성을 파악하고자, 국내 시공 현장에서 사용 중인 벤토나이트계 그라우트 9종과 충남 보령의 해성점토, 그리고 미국 등 선진국에서 사용 중인 시멘트계 그라우트를 선택하여 열전도도 실험과 점도실험을 수행하였다. 벤토나이트계 그라우트는 벤토나이트의 무게비가 증가 하거나 첨가제(천연규사)의 비율이 증가 할 때 열전도도와 점도가 증가하는 경향이 나타났다. 또한, 첨가제 사용 시 그라우트의 점도가 낮을 경우 그라우트와 첨가제의 재료분리 현상이 나타났다. 해성점토에 대한 실험에서는 해성점토가 벤토나이트에 비해 팽윤성이 낮아 그라우트 재료로는 부적합 하다는 결론을 내렸다. 시멘트계 그라우트의 열전도도 실험에서 습윤 상태의 시멘트계 그라우트가 벤토나이트계 그라우트 보다 높은 열전도도를 가지는 것으로 나타났으며 건조 상태로 변할 때 벤토나이트계에 비해 열전도도 감소폭이 작은 것으로 나타났다. 본 연구를 통해 그라우트의 함수비 유지가 지중 열교환기의 열전달 효율에 중요한 역할을 하는 것을 알 수 있었다.

A geothermal heat pump system is a preferable alternative energy system in Korea because it uses the heat energy of the earth, which is environmentally friendly and inexhaustible. In order to characterize the thermal conductivity and viscosity of grout materials used for backfilling ground heat exchangers, nine bentonite grouts, one marine clay from Boryung, and cement grouts adapted in the United State have been considered in this study. The bentonite grouts indicate that the thermal conductivity and viscosity increase with the content of bentonite or filler (silica sand). In addition, material segregation can be observed when the viscosity of grout is relatively low. The marine clay turns out to be unsuitable for backfilling the ground heat exchanger due to its insufficient swelling potential. The saturated cement grouts appear to possess much higher thermal conductivity than the saturated bentonite grouts, and the reduction of thermal conductivity in the cement grouts after drying specimens is less than that in the case of the bentonite grouts. Maintaining the moisture content of grouts is a crucial factor in enhancing the efficiency of ground heat exchangers.

키워드

참고문헌

  1. 조정식 (2006), "지중 열교환기 전열성능 향상을 위한 뒤채움재 조성에 관한 연구.", 산업자원부, 최종보고서 2004-N-GE08-P-01
  2. Allan, M. L. and Philippacopoulos, A. (1999). "Properties and performance of cement-based grouts for geothermal heat pump application.", U.S. Department of Energy, Washington D.C.
  3. Allan, M. L. (2000). "Materials characterization of superplasticized cement-sand grout.", Cement and Concrete Research, vol.30, pp.937-942 https://doi.org/10.1016/S0008-8846(00)00275-1
  4. Paul, N. D. and Remund, C. P. (1997). "Physical, thermal and hydraulic properties of bentonite-based grouts.", Electric Power Research Institue, Final Report No.TR109160, ERI Project RP38 81-1
  5. Philippacopoulos, A. and Berndt, M. L. (2001). "Influence of debonding in ground heat exchanger used with geotherma heat pumps.", Geothermics, vol.30, pp.527-545 https://doi.org/10.1016/S0375-6505(01)00011-6