Fatigue Strength Evaluation of Steel-Concrete Composite Bridge Deck with Corrugated Steel Plate

절곡강판을 이용한 교량용 강-콘크리트 합성 바닥판의 피로 성능평가

  • Received : 2008.02.18
  • Accepted : 2008.04.29
  • Published : 2008.12.10

Abstract

This paper deals with the fatigue behavior and strength of a new-type of steel-concrete composite bridge deck. The new-type composite bridge deck consists of corrugated steel plate, welded T-beams, stud-type shear connectors and reinforced concrete filler. A total of eight composite bridge deck specimens were fabricated, the fatigue tests were conducted under four-point bending test with three different stress ranges in constant amplitude. According to the test results, the fatigue crack generated at the welding part of the corrugated steel plate, progressed down to the bottom of the steel plate and encountered the crack, which came out from the opposite side at the same position. After the two cracks were connected at the bottom of the steel plate, the lower flange was cut off and the fatigue crack developed up to the T-beam. And the displacements and strains of fatigue test specimens were increasing with cyclic loading number, these were changed sharply at the fatigue failure. The fatigue results are compared with the design S-N curves specified in the Korea Highway Bridge Design Specifications and data in NCHRP 102 and NCHRP 147 report. The new-type composite bridge deck has a stress category of C, which means that new-type composite bridge deck can be designed by the current fatigue design specifications provided for steel members.

본 연구는 하부 절곡강판과 T형강을 D16mm 스터드 전단연결재를 이용하여 콘크리트와 일체화시킨 교량용 강합성 바닥판의 피로 거동 및 피로성능을 평가하기 위한 것이다. 제안된 강합성 바닥판의 피로성능 평가를 위하여 총 8본의 시험체가 제작되었으며, 각각의 시험체에 3 종류의 일정진폭을 가진 피로하중이 재하되었다. 피로실험결과, 피로균열은 강합성 바닥판 하부 절곡강판의 절곡점에서 발생하여 상부 T형강으로 진전되는 것으로 나타났으며, 피로하중에 따라 시험체의 변위 및 변형률이 증가하고 피로균열발생 후 변위와 변형률이 급격히 변화하였다. 제안된 강합성 바닥판의 피로강도는 도로교설계기준 및 도로교설계기준 피로상세 범주의 자료가 된 NCHRP 102와 NCHRP 147 보고서의 피로실험결 과와 비교하여 평가한 결과 대상 강합성 바닥판은 피로상세 범주 C에 해당하는 것으로 평가되었다.

Keywords

References

  1. 日本 土木學會(2000), 道路橋 床版の 新技術 性能調査形 設計-第2片 合成床版, 日本土木學會 剛構造委員會, pp. 430-437
  2. Albrecht(1983), S-N Fatigue Reliability Analysis of Highway Bridges, ASTM STP 798, pp.184-204
  3. Fisher, J.W., Frank, K. H., Hirt, M.A. and McNamee, B. M.(1970), Effects of Weldments on the Fatigue Strength of Steel Beams, NCHRP Report 102, 114
  4. Fisher, J. W., Albrecht, P. A., Yen, B. T., Klingerman, D. J. and McNamee, B. M.(1974), Fatigue Strength of Steel Beams with Welded Stiffeners and Attachements, NCHRP Report 147, 85
  5. Higgins, C., Mitchell, H.(2001), Behavior of Composite Bridge Decks with Alternative Shear Connectors, J. of Bridge Engng. Vol. 6, No. 1, pp. 17-22 https://doi.org/10.1061/(ASCE)1084-0702(2001)6:1(17)
  6. Nakai, H., Matsui, S., Yoda, T., Kurita, A.(1998), Trends in Steel-Concrete Composite Bridges in Japan, Struct. Engng. Int., pp. 30-34
  7. Shanmugan, N.E., Kumar, G., Thevendran, V.(2001), Finite Element Modellong of Double Skin Composite Slabs, Finite Elements in Analysis and Design, pp. 1-21
  8. Watanabe, H., Kaido, H.(2001), Static Loading Test of Non-Prestressed Continuous Composite Girders with Steel Plate-Concrete Composite Deck (SC-Deck), 1st Int. Conf. on Steel & Composite Struct., pp. 1335-1342
  9. 박기태, 김상효, 이영호, 황윤국(2005), GFRP 바닥판의 내구성능 검증에 관한 시험적 연구, 대한토목학회 논문집, 제 25권, 제 5A호, pp. 923-929
  10. 김승억, 나옥빈, 정하채(2005), 승용차 전용 조립식 강바닥닥판의 피로실험, 대한토목학회 논문집, 제 25권, 제 1A호, pp. 253-260
  11. 정연주, 정광회, 구현본, 김병석(2004), 교량용 강.콘크리트 합성바닥판의 실험적 정적거동 특성, 대한토목학회 논문집, 제 24권, 제 1A호, pp. 17-25
  12. 한국건설기술연구원(2003), 장수명합리화 바닥판 개발(BRIDGE 200, 2차년도) 건기연 2003-050
  13. 한국건설기술연구원(2004), 장수명합리화 바닥판 개발(BRIDGE 200, 3차년도) 건기연 2005-053
  14. 건설교통부(2005), 도로교설계기준