Analytical Study for Seismic Retrofit of SMRFs Connections

철골모멘트접합부의 내진보강에 관한 해석적 연구

  • 오상훈 (부산대학교 건축학부) ;
  • 김영주 (고려대학교 건축.사회환경공학과 BK21)
  • Received : 2008.02.18
  • Accepted : 2008.06.10
  • Published : 2008.06.10

Abstract

Based on previous research on steel moment connections, experimental and analytical results showed that the deformation capacity was poor in specimens using RHS columns and with conventional weld access holes and strain concentration at the end of beam is influenced by the efficiency in transmitting the moment in the web of beam through the beam-to-column joint. This paper is focused on the retrofitting of pre-Kobe steel moment frame connections using a stiffened RBS and a welded horizontal stiffener. These retrofitting methods were considered only in beam bottom flange. A parametric study was performed using nonlinear finite element analysis to elucidate and improve the retrofit methods of connections.

철골모멘트접합부에 관한 이전의 연구에 의하면 RHS 기둥과 기존의 스캘럽을 가진 접합부실험체의 변형능력은 매우 열등했고, 보단부의 응력집중은 보에서 기둥으로 전달되는 모멘트의 전달효율에 영향을 받는다는 사실을 실험이나 해석적으로 밝혔다. 본 연구는 보강된 RBS 접합부와 용접수평스티프너를 사용한 효고현남부지진 이전에 지어진 모멘트 접합부를 내진보강하는데 주안점을 두었다. 이러한 내진보강은 시공성과 경제성을 고려하여 보의 하부플랜지에만 실시하였다. 접합부의 내진보강방법을 발견하고 이를 향상시키기 위해서 비선형유한요소해석을 통해서 다양한 변수를 바탕으로 한 파라메타 연구를 실시하였다.

Keywords

References

  1. K. Okada, S.H. Oh, S. Yamada, T. Imaeda, M. Yamaguchi and A. Wada. (2001). Experimental study on deformation capacity of composite beams with conventional type beam-to-column connections. Journal of Structural Construction and Engineering, AIJ, 547(9), pp. 161-168
  2. Y. Matsumoto, H. Akiyama and S. Yamada. (1999). Relationship between deformation capacity of beam at steel beam-to-column connection and joint efficiency. J. Struct. Constr. Eng., AIJ, 523(9), pp. 117-124
  3. Y.J. Kim, S.H. Oh (2006), Effect of moment transfer efficiency of a beam web on deformation capacity at box column-to-H beam connections, Journal of Constructional Steel Research., Vol. 63, pp. 24-36 https://doi.org/10.1016/j.jcsr.2006.02.009
  4. Steel Design Guide Series 12. (1999). Modification of existing welded steel moment frame connections for seismic resistance, AISC
  5. Y.J. Kim, S.H. Oh and T.S. Moon. (2004). Seismic behavior and retrofit of steel moment connections considering slab effects. Eng. Struct., 26(13), pp. 1993-2005 https://doi.org/10.1016/j.engstruct.2004.07.017
  6. S.H. Oh, Y.J. Kim, T.S. Moon (2007), Cyclic performance of existing moment connections in steel retrofitted with a reduced beam section and bottom flange reinforcements, Canadian journal of civil engineering, Vol.34(2), pp. 199-209 https://doi.org/10.1139/L06-125
  7. K. Okada, S.H. Oh and S. Yamada. (2003). Effect of joint efficiency at beam-to-column connection on ductility capacity of composite beams. J. Struct. Constr. Eng., AIJ, 573(11), pp. 185-192