UHPCC를 사용한 철근 콘크리트 보의 휨강도 평가

Evaluation on Flexural Capacity of Reinforced Concrete Beams with Ultra-High Performance Cementitious Composites

  • 투고 : 2008.02.26
  • 심사 : 2008.06.02
  • 발행 : 2008.09.30

초록

본 연구에서는 UHPCC를 사용한 철근 콘크리트 보의 휨강도를 평가하였고, 낮은 철근비로 보강된 RC보를 포함한 휨 실험을 통해 기존의 섬유보강 콘크리트 보의 휨강도 예측식과의 일치 여부를 파악하였다. 또한 섬유보강 콘크리트에서 섬유 보강을 통한 보강철근의 대체효과를 정량적으로 평가하였다. 그 결과 ACI 544 위원회에서 제시하는 섬유보강 콘크리트를 사용한 철근보강 보의 휨강도 예측식은 압축강도 150MPa 이상의 UHPCC에 대해서는 잘 일치하지 않으며, 특히 철근비 1.5% 이하의 저보강 철근보에 대해서는 상당히 과소평가하는 것으로 나타났다. 섬유보강 콘크리트를 사용함으로써 얻을 수 있는 보의 휨내력 증가 효과는 저보강 철근보에서 상당히 큰 것으로 나타났으며, 실험결과를 바탕으로 강섬유의 특성과 철근비를 고려한 철근대체 효과 평가식을 제안하였다.

This paper concerns the flexural capacity of reinforced concrete beams with ultra-high performance cementitious composites(UHPCC). It was investigated if the existing equations to estimate the flexural capacity of reinforced fiberous concrete beams are applicable with the experiments including lightly reinforced concrete beams. The reinforcing effect when the steel fiber reinforced concrete was used in beams was also estimated. The results showed that the equation to predict the flexural capacity of reinforced steel fiber concrete by ACI 544 committee didn't have a good agreement with the test results and underestimated the flexural capacity in especially lightly reinforced beams with under 1.5% reinforcement ratio. the enhancement of flexural capacity was quite considerable in lightly reinforced beams when the steel fiber reinforced concrete was used. A equation to predict the reinforcing effect of steel fiber in reinforced steel fiber beams was developed. the equation was proposed as a function of both the characteristics of steel fiber and reinforcement ratio.

키워드

참고문헌

  1. Heneger, C. H., and Doherty, T. J., "Analysis of reinforced fibrous concrete beams", Journal of structural engineering, ASCE, Vol. 102, No. 1, 1976, pp. 178-188
  2. Craig, R. J., "Flexural Behavior and Design of Reinforced Fibrous Concrete Members", Fiber Reinforced Concrete Properties and Application, SP 105-28, American Concrete Institute, 1987, pp. 517-563
  3. Imam, M., Vandewalle, L., and Mortelmans, F., "Shear-moment Analysis of Reinforced High Strength Concrete Beams Containing Steel Fibers", Canadian Journal of Civil Engineering, Vol. 22, 1995, pp. 462-470
  4. Williamson, G. R., "Compression Characteristics and Structural Beam Design Analysis of Steel Fiber Reinforced Concrete", Technical Report No. M-62, U. S. Army Construction Engieering research Laboratory, Champaign, 1973
  5. Pearlman, S. L., "Flexural Performance of Reinforced Steel Fiber Concrete Beams", MS thesis, Carnegie-Mellon University, 1979
  6. Swamy, R. N., and Al-Ta-an, S. A., "Deformation and Ultimate Strength in Flexure of Reinforced Concrete Beams Made with Steel Fiber Concrete", ACI Journal, Vol. 78, No. 5, 1981, pp. 395-405
  7. Hansoun, M. N., and Sahebjam, K., "Plastic Hinge in Two-span Reinforced Concrete Beams Containing Steel Fibers", Canadian Society for Civil Engineering, 1985, pp. 119-139
  8. Al-Ta'an, S. A., and Al-Feel, J. R., "Evaluation of Shear Strength of Fiber-reinforced Concrete Beams", Cement and Concrete Composites, Vol. 12, No. 2, 1990, pp. 87-94 https://doi.org/10.1016/0958-9465(90)90045-Y
  9. Imam, M., Vandewalle, L., and Mortelmans, F., "Proportioning and Properties of Very High Strength Concrete with and without Steel Fibers", Proceedings of International Conference "Concrete 2000", 1993, pp. 1693-1705
  10. ACI Committee 544, "Design Considerations for steel fiber reinforced concrete", ACI 544. 4R-88, American Concrete Institute, Detroit, 1988
  11. ACI Committee 318, "Building code requirements for reinforced concrete with commentary (ACI 318-02)", American Concrete Institute, 2002
  12. Naaman, A. E., "Statistical Theory of Strength for Fiber Reinforced Concrete", Doctorial Thesis, Massachusetts Institute of Technology, 1972, pp. 196
  13. Fanella, D. A., and Naaman, A. E., "Stress-strain properties of Fiber Reinforced Mortar in Compression", ACI Journal, Vol. 82, No. 4, 1985, pp. 475-483
  14. Shin, S. W., Ghosh, S. K., and Moreno, J., "Flexural ductility of ultra-high-strength concrete members", ACI structural journal, Vol. 86, No. 4, 1989, pp. 394-400
  15. Naaman, A. E., "Strain hardening and deflection hardening fiber reinforced cement composites", High Performance Fiber Reinforced Cement Composites(HPFRCC4), pp. 95-113