대한산업공학회지 (Journal of Korean Institute of Industrial Engineers)

  • 제34권3호
  • /
  • Pages.270-288
  • /
  • 2008
  • /
  • 1225-0988(pISSN)
  • /
  • 2234-6457(eISSN)
대한산업공학회 (Korean Institute of Industrial Engineers)
권호 표지

역방향 로지스틱스 : 과제 및 기존연구

Reverse Logistics : Research Issues and Literature Review

  • Lee, Dong-Ho (Department of Industrial Engineering, Hanyang University) ;
  • Kim, Hwa-Joong (Graduate School of Logistics, Inha University) ;
  • Kim, Ji-Su (Department of Industrial Engineering, Hanyang University)
  • 투고 : 2008.01.30
  • 심사 : 2008.05.23
  • 발행 : 2008.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Among various environmental issues, those for worn-out products are increasingly important due to rapid development and improvement of products, shortages of dumping sites and waste-incineration facilities, and legislation pressures and customer recognitions to protect the environment. Under such circumstances, collection and product recovery activities give rise to additional material flows from customers back to collectors and reprocessors. Reverse logistics, the opposite direction of the conventional forward logistics, is concerned with the management of this material flow. In this paper, we consider the emerging concept of reverse logistics. First, the concept of sustainable development is explained to explain the philosophical background of various environmental issues. Second, we explain the basics of reverse logistics, which includes the overall structure and the classification of network types. Finally, we review the previous research articles, especially in the aspect of industrial engineering, after classifying the decision problems into : (a) product recovery strategy; (b) network design and operation; (c) inventory management; (d) disassembly problems; and (e) remanufacturing problems.

키워드

참고문헌

  1. Angelelli, E. and Speranza, M. G. (2002), The periodic vehicle routing problem with intermediate facilities, European Journal of Operational Research, 137, 233-247 https://doi.org/10.1016/S0377-2217(01)00206-5
  2. Ashayeri, J., Heuts, R., and Jansen, A. (1996), Inventory management of repairable service parts for personal computers, International Journal of Operations and Production Management, 16, 74-97
  3. Association of Electronics Environment (2006), Refused Electronic Products Discharge and Recycling Research on Actual State
  4. Baptisa, S., Oliveira, R. C., and Zúquete, E. (2002), A period vehicle routing case study, European Journal of Operational Research, 139, 220-229 https://doi.org/10.1016/S0377-2217(01)00363-0
  5. Barros, A. I., Dekker, R., and Scholten, V. (1998), A two-level network for recycling sand : a case study, European Journal of Operational Research, 110, 199-214 https://doi.org/10.1016/S0377-2217(98)00093-9
  6. Bautista, J. and Pereira, J. (2005), Modeling the problem of locating collection areas for urban waste management. an application to the metropolitan area of Barcelona, Omega, 34, 617-629 https://doi.org/10.1016/j.omega.2005.01.013
  7. Beltrami, E. J. and Bodin, L. D. (1974), Networks and vehicle routing for municipal waste collection, Networks, 4, 65-94 https://doi.org/10.1002/net.3230040106
  8. Beullens, P., van Oudheusden, and van Wassenhiovem L. N. (2004), Collection and vehicle routing issues in reverse logistics, in Reverse Logistics: Quantitative Models for Closed-Loop Supply Chain, (eds Dekker, R., Fleischmann, M., Inderfurth, K., and van Wassenhove, L. N.) Berlin: Springer, 95-134
  9. Bloemhof-Ruwaard, J. M., Fleischmann, M., and van Nunen, J. A. E. E. (1999), Reviewing distribution issues in reverse logistics, Lecture Notes in Economics and Mathematical Systems, 480, 23-44
  10. Boks, C., Nilsson, J., Masui, K., Suzuki, K., Rose, C., and Lee, B. H. (1998), An international comparison of product end-of-life scenarios and legislation for consumer electronics, Proceedings of the 1998 IEEE International Symposium on Electronics and the Environment, 19-24
  11. Bras, B. and McIntosh M. W. (1999), Product, process and organizational design for remanufacture, Robotics and Computer Integrated Manufacturing, 15, 167-178 https://doi.org/10.1016/S0736-5845(99)00021-6
  12. Carter, C. R. and Ellram, L. M. (1998), Reverse logistics : a review of the literature and framework for future investigation, Journal of Business Logistics, 19, 85-102
  13. Caruso, C., Colorni, A., and Paruccini, M. (1993), The regional urban solid waste management system : a modeling approach, European Journal of Operational Research, 70, 16-30 https://doi.org/10.1016/0377-2217(93)90229-G
  14. Cho, B.-M. and Lee, D.-H (2007), A two-stage heuristic for period vehicle routing : minimizing the fleet size, Technical Report, Department of Industrial Engineering, Hanyang University, Seoul, South Korea
  15. Chung, E. Y. and Park, Y. B. (2004), A genetic algorithm for vehicle routing problems with mixed delivery and pick-up, Journal of the Korean Institute of Industrial Engineers, 30, 346-354
  16. Clegg, A. J., Williams, D. J. and Uzsoy, R. (1995), Production planning for companies with remanufacturing capability, in Proceedings of the IEEE Symposium on Electronics and the Environment, Orlando, Florida, USA, 186-191
  17. Cohen, M. A., Nahmias, S. and Pierskalla, W. P., (1980), A Dynamic inventory system with recycling, Naval Research Logistics Quarterly, 27, 289-296
  18. Dantzig, G. B. and Ramser, J. H. (1959), The truck dispatching problemproblem, Management Science, 6, 80-91 https://doi.org/10.1287/mnsc.6.1.80
  19. de Brito, M. P. and Dekker, R. (2004), A Framework for reverse logistics, in Reverse Logistics : Quantitative Models for Closed-Loop Supply Chain, (eds. Dekker, R., Fleischmann, M., Inderfurth, K., and van Wassenhove, L. N.) Berlin : Springer, 3-27
  20. Dowlatshahi, S. (2000), Developing a theory of reverse logistics, Interfaces, 30, 143-155 https://doi.org/10.1287/inte.30.3.143.11670
  21. Erdor, G., Kis, T., and Xirouchakis, P. (2001), Modeling and evaluating product end-of-life options, International Journal of Production Research, 39, 1203-1220 https://doi.org/10.1080/713845985
  22. Ferguson, N. and Browne, J. (2001), Issues in end-of-life product recovery and reverse logistics, Production Planning and Control, 12, 534-547 https://doi.org/10.1080/09537280110042882
  23. Fleischmann, M., Beullens, P., Bloemhof-Ruwaard, J. M., van Wassenhove, L. N. (2001), The impact of product recovery on logistics network design, Production and Operations Management, 10, 156-173 https://doi.org/10.1111/j.1937-5956.2001.tb00076.x
  24. Fleischmann, M., Bloemhof-Ruwaard, J. M., Dekker, R., van der Laan, E.A., van Nunen, J. A. E. E., van Wassenhove, L. N. (1997), Quantitative models for reverse logistics : a review, European Journal of Operational Research, 103, 1-17 https://doi.org/10.1016/S0377-2217(97)00230-0
  25. Fleischmann, M., Krikke, H. R., Dekker, R., Flapper, S. D. P. (2000), A characterisation of logistics networks for product recovery, Omega, 28, 653-666 https://doi.org/10.1016/S0305-0483(00)00022-0
  26. Goggin, K. and Browne, J. (2000), Towards a taxonomy of resource recovery from end-of-life products, Computers in Industry, 42, 177-199 https://doi.org/10.1016/S0166-3615(99)00069-X
  27. Guide Jr., V. D. R., Jayaraman, V., and Srivastava, R. (1999), Production planning and control for remanufacturing, a state-of-the-art survey, Robotics and Computer Integrated Manufacturing, 15, 221-230 https://doi.org/10.1016/S0736-5845(99)00020-4
  28. Guide, Jr., V. D. R. (1996), Scheduling using drum-buffer-rope in a remanufacturing environment, International Journal of Production Research, 34, 1081-1091 https://doi.org/10.1080/00207549608904951
  29. Guide, Jr., V. D. R. (1997), Scheduling with priority dispatching rules and drum-buffer-rope in a recoverable manufacturing system, International Journal of Production Economics, 53, 101-116 https://doi.org/10.1016/S0925-5273(97)00097-2
  30. Guide, Jr., V. D. R. (2000), Production planning and control for remanufacturing: industry practice and research needs, Journal of Operations Management, 18, 467-483 https://doi.org/10.1016/S0272-6963(00)00034-6
  31. Guide, Jr., V. D. R. and Ghiselli, G. A. (1995), Implementation of drumbuffer- rope at a military rework depot engine works, Production and Inventory Management Journal, 36, 79-83
  32. Guide, Jr., V. D. R. and Spencer, M. S., (1997), Rough-cut capacity planning for remanufacturing firms, Production Planning and Control, 8, 237-244 https://doi.org/10.1080/095372897235299
  33. Guide, Jr., V. D. R., Jayaraman, V., Srivastava, R., and Benton, W. C. (2000), Supply-chain management for recoverable manufacturing systems, Interfaces, 30, 125-142 https://doi.org/10.1287/inte.30.3.125.11656
  34. Gungor, A. and Gupta, S. M. (1999), Issues in environmentally conscious manufacturing and product recovery : a survey, Computers and Industrial Engineering, 36, 811-853 https://doi.org/10.1016/S0360-8352(99)00167-9
  35. Hirsch, B. E., Kuhnmann, T., and Schumacher, J. (1998), Logistics simulation of recycling networks, Computers in Industry, 36, 31-38 https://doi.org/10.1016/S0166-3615(97)00095-X
  36. Homem De Mello, L. S. and Sanderson, A. C. (1990), And/OR graph representation of assembly plans, IEEE Transactions on Robotics and Automation, 6, 188-199 https://doi.org/10.1109/70.54734
  37. Inderfurth, K. (1997), Simple optimal replenishment nd disposal policies for a product recovery system with leadtimes, OR spectrum, 19, 111-122 https://doi.org/10.1007/BF01545510
  38. Jayaraman, V., Guide, V. D. R., and Srivastava, R. (1999), A closed- loop logistics model for remanufacturing, Journal of the Operational Research Society, 50, 497-508 https://doi.org/10.1057/palgrave.jors.2600716
  39. Jayaraman, V., Patterson, R. A., and Rolland, E. (2003), The design of reverse distribution networks : Models and solution procedures, European Journal of Operational Research, 150, 128-149 https://doi.org/10.1016/S0377-2217(02)00497-6
  40. Kang, J.-G., Kraftsik, G., Lee, D.-H., and Xirouchakis, P. (2001), A simulation study on telephone remanufacturing processes, International Journal of Environmentally Conscious Design and Manufacturing. 10, 9-22
  41. Kang, J.-G., Lee, D.-H., Xirouchakis, P., and Lambert, A. J. D. (2002), Optimal disassembly sequencing with sequence dependent operation times based on the directed graph of assembly states, Journal of the Korean Institute of Industrial Engineers, 28, 264-273
  42. Kara, S., Rugrungruang, F., and Kaebernick, H. (2007), Simulation modelling of reverse logistics networks, International Journal of Production Economics, 106, 61-69 https://doi.org/10.1016/j.ijpe.2006.04.009
  43. Kausner, M. and Hendrikson, C. T. (2000), Reverse-logistics strategy for product take-back, Interfaces, 20, 156-165
  44. Kim, E. G. (2007), Optimal disposal policy in a hybrid production system with manufacturing and remanufacturing, Journal of the Korean Institute of Industrial Engineers, 33, 312-321
  45. Kim, H. S, Han, D. H, and Lee, I. C. (2001), A case study of the reverse logistics considering an environment, Journal of the Society of Korea Industrial and Systems Engineering, 24, 69-77
  46. Kim, H. S. and Yang, J. H. (2005), Analysis of Developing Models of Reverse Logistics Systems for Returns, Logistics Study, 13, 39-56
  47. Kim, H. S., Ryu, J, H., Hong, M. S., and Rim, S. C. (2007b), Optimizing reverse logistics network for end-of-life electrical appliances, IE Interfaces, 20, 154-161
  48. Kim, H.-J., Lee, D.-H., and Xirouchakis, P. (2007a), Disassembly scheduling : literature review and further research Directions, International Journal of Production Research, 45, 4465-4484 https://doi.org/10.1080/00207540701440097
  49. Kim, I. T. (1996), What is Local Agenda21, Local Administration, 10
  50. Kim, J.-D., Choi, H.-S., and Lee, D.-H. (2007d), A case study on the stochastic vehicle routing in a refuse collection system, Journal of the Korean Society of Supply Chain Management, 7, 57-65
  51. Kim, J.-G., Cho, B.-M., and Lee, D.-H. (2007c), Period vehicle routing in a refuse collection system : a case study, Technical Report, Department of Industrial Engineering, Hanyang University, Seoul, South Korea
  52. Kim, J.-S. and Lee, D.-H. (2007), Heuristic algorithms for the collection network design problem in reverse logistics, Technical Report, Department of Industrial Engineering, Hanyang University, Seoul, South Korea
  53. Kim, J.-S., Choi, H.-S., and Lee, D.-H. (2008), Search heuristics for the capacitated collection network design problem for reverse logistics, Technical Report, Department of Industrial Engineering, Hanyang University, Seoul, South Korea
  54. Kim, T. Y., Kim, J. S., and Hur, S. (2001), An algorithm for optimal inventory level in multi-echelon repairable-item inventory system with general service time distribution, Journal of the Korean Institute of Industrial Engineers, 27, 226-232
  55. Ko, H. J. and Evans, G. W. (2007), A genetic algorithm-based heuristic for the dynamic integrated forward/reverse logistics network for 3PLs, Computers and Operations Research, 34, 346-366 https://doi.org/10.1016/j.cor.2005.03.004
  56. Ko, H. J., Ko, C. S., and Chung, K. H. (2004), A genetic algorithm apapproach for logistics network integrating forward and reverse logistics, IE Interfaces, 17, 141-151
  57. Koh, S. G., Hwang, H., Sohn, K. I. and Ko, C. S. (2002), An optimal ordering and recovery policy for reusable items. Computers and Industrial Engineering, 43, 59-73 https://doi.org/10.1016/S0360-8352(02)00062-1
  58. Konstantaras, I. and Papachristos, S. (2007), A note on : Developing an exact solution for an inventory system with product recovery, International Journal of Production Economics, doi : 10.1016/j.ijpe. 2007.03.021
  59. Korea National Cleaner production Center (2003), International Environmental Conventions and Legislations, http:// www.kncpc.re.kr
  60. Korean Agency for Technology and Standards (2007), Development of Global Competitiveness to Environment Management, http://www. kats.go.kr
  61. Krikke, H. R., Kooi, E. J., and Schuur, P. C. (1999), Network design in reverse logistics : a quantitative model, Lecture Notes in Economics and Mathematical Systems, 480, 45-62
  62. Kroon, L. and Vrijens, G. (1995), Returnable containers : an example of reverse logistics, International Journal of Physical Distribution and Logistics Management, 25, 56-68 https://doi.org/10.1108/09600039510083934
  63. Krupp, J. (1992), Core obsolescence forecasting in remanufacturing, Production and Inventory Management Journal, 33, 12-17
  64. Lambert, A. J. D. (1997), Optimal disassembly of complex products, International Journal of Production Research, 35, 2509-2523 https://doi.org/10.1080/002075497194633
  65. Lambert, A. J. D. (2003), Disassembly sequencing : a survey, International Journal of Production Research, 41, 3721-3759 https://doi.org/10.1080/0020754031000120078
  66. Laporte, G. (1992), The vehicle routing problem : an overview of exact and approximation algorithms, European Journal of Operational Research, 59, 345-358 https://doi.org/10.1016/0377-2217(92)90192-C
  67. Laporte, G., Gendreau, M., Potvin, J.-Y., and Semet, F. (2000), Classical and modern heuristics for the vehicle routing problem, International Transactions in Operations Research, 7, 285-300 https://doi.org/10.1111/j.1475-3995.2000.tb00200.x
  68. Lebreton, B. and Tuma, A. (2006), A quantitative approach to assessing the profitability of car and truck tire remanufacturing, International Journal of Production Economics, 104, 639-652 https://doi.org/10.1016/j.ijpe.2004.11.010
  69. Lee, D. H. and Dong, M. (2007), A heuristic approach to logistics network design for end-of-lease computer products recovery, Transportation Research Part E : Logistics and Transportation Review, Available online
  70. Lee, D.-H., Kang, J.-G., and Xirouchakis, P. (2001), Disassembly planning and scheduling: review and further research, Proceedings of the Institution of Mechanical Engineers Part B : Journal of Engineering Manufacture, 215, 695-710
  71. Lee, J. and Kang, H. S. (2004), Environmental Management, Hyung Seol
  72. Lee, J.-S., (2004) Reverse logistics network design for reuse, remanufacturing and recycling, Korea Logistics Review, 14, 77-104
  73. Lee, S. B. (2001), Production and Operations Management, Kyung Moon
  74. Lim, J. S., Jeong, S. J., and Kim, K. S. (2001), The effect of reverse logistics with simulation method-An example from the automotive industry-, Journal of the Korea Society for Simulation, 15, 13-21
  75. Listes, O. (2005), A genetic stochastic model for supply-and-return network design, Computers and Operations Research, 34, 417-442 https://doi.org/10.1016/j.cor.2005.03.007
  76. Listes, O. and Dekker, R. (2005), A stochastic approach to a case study for product recovery network design, European Journal of Operational Research, 160, 268-187 https://doi.org/10.1016/j.ejor.2001.12.001
  77. Louwers, D., Kip, B. J., Peters, E., Souren, F., and Flapper, S. D. P.(1999), A facility location allocation model for reusing carpet materials, Computers and Industrial Engineering, 36, 855-869 https://doi.org/10.1016/S0360-8352(99)00168-0
  78. Lu, Z., and Bostel, N. (2007), A facility location model for logistics systems including reverse flows : the case of remanufacturing activities, Computers and Operations Research, 34, 299-323 https://doi.org/10.1016/j.cor.2005.03.002
  79. Lund, R. T. (1984), Remanufacturing, Technology Review, 87, 18-28
  80. Mabini, M. C., Pintelon, L. M., and Gelders, L. F. (1992), EOQ type formulations for controlling repairable inventories, International Journal of Production Economics, 28, 21-33 https://doi.org/10.1016/0925-5273(92)90110-S
  81. Mansini, R. and Speranza, M. G. (1998), A linear programming model for separate refuse collection service, Computers and Operations Research, 25, 659-673 https://doi.org/10.1016/S0305-0548(97)00094-4
  82. Mebratu, D. (1998), Sustainability and sustainable development: historical and conceptual review, Environmental Impact Assessment Review, 18, 493-520 https://doi.org/10.1016/S0195-9255(98)00019-5
  83. Min, H., Ko, H. J., and Ko, C. S. (2006), A genetic algorithm approach to developing the multi-echelon reverse logistics network for product returns, Omega, 34, 56-69 https://doi.org/10.1016/j.omega.2004.07.025
  84. Min, J. W., Kim, Y. J., Ha, H. K., and Park, Y. H. (2007), Global Benchmarking Study for Streamlining Reverse Logistics, Jungseok Research Institute of International Logistics and Trade
  85. Muckstadt, J. A. and Isaac, M. H. (1981), An analysis of single item inventory systems with returns, Naval Research Logistics Quarterly, 28, 237-254 https://doi.org/10.1002/nav.3800280207
  86. Nahmias, N. and Rivera, H. (1979), A deterministic model for a repairable item inventory system with finite repair rate. International Journal of Production Research, 17, 215-221 https://doi.org/10.1080/00207547908919609
  87. O'Shea, B., Grewal, S. S., and Kaebernick, H. (1998), State of the art literature survey on disassembly planning, Concurrent Engineering : Research and Applications, 6, 345-357
  88. Park, J. C., Choi, S. Y., Lim, J. H., Yoon, K. J., Cha, Y. J. and Hong, Y. H (2004), Korean Environmental Sustainability : Evaluation and Assignment, DaeYoung
  89. Pati, R. K., Vrat, P., and Kumar, P. (2008), A goal programming model for paper recycling system, Omega, 36, 405-417 https://doi.org/10.1016/j.omega.2006.04.014
  90. Pnueli, Y. and Zussman, E. (1997), Evaluating the end-of-life value of a product and improving it by redesign, International Journal of Production Research, 35, 921-942 https://doi.org/10.1080/002075497195452
  91. Pohlen, T. L. and Farris, M. T. (1992), Reverse logistics in plastics recycling, International Journal of Physical Distribution and Logistics Management, 22, 35-47
  92. Realff, M. J., Ammons, J. C., and Newton, D. (1999), Carpet recycling: determining the reverse logistics system design, The Journal of Polymer-Plastics Technology and Engineering, 38, 547-567 https://doi.org/10.1080/03602559909351599
  93. Richter, K. (1996a), The EOQ repair and waste disposal model with variable setup numbers, European Journal of Operational Research, 95, 313-324 https://doi.org/10.1016/0377-2217(95)00276-6
  94. Richter, K. (1996b), The extended EOQ repair and waste disposal model, International Journal of Production Economics, 45, 443-448 https://doi.org/10.1016/0925-5273(95)00143-3
  95. Rogers, D. S. and Tibben-Lembke, R. (2001), An examination of rereverse logistics practices, Journal of Business Logistics, 22, 129-148 https://doi.org/10.1002/j.2158-1592.2001.tb00007.x
  96. Rubin, E. S. and Davidson, C. I. (2001), Introduction to Engineering and the Environment, McGraw-Hill
  97. Salema, M. I. G., Barbosa-Povoa, A. P., and Novais, A. Q. (2007), An optimization model for the design of a capacitated multi-product reverse logistics network with uncertainty, European journal of operational research, 179, 1063-1077 https://doi.org/10.1016/j.ejor.2005.05.032
  98. Santochi, M., Dini, G., and Failli, F. (2002), Computer aided disassembly planning : state of the art and perspectives, Annals of the CIRP, 51, 1-23 https://doi.org/10.1016/S0007-8506(07)61453-X
  99. Schrady, D. A. (1967), A deterministic inventory model for repairable items, Naval Research Logistics Quarterly, 14, 391-398 https://doi.org/10.1002/nav.3800140310
  100. Shih, L. H. (2001), Reverse logistics system planning for recycling electrical appliances and computer in Taiwan, Resources Conservation and Recycling, 32, 55-72 https://doi.org/10.1016/S0921-3449(00)00098-7
  101. Simpson, V. P. (1978), Optimum solution structure for a repairable inventory problem, Operations Research, 26, 270-281 https://doi.org/10.1287/opre.26.2.270
  102. Spengler, Th., Püchert, H., and Rentz, P. O. (1998), Environmental integrated production and recycling management, European Journal of Operational Research, 97, 308-326
  103. Srivastava, S. K. (2007), Green supply chain management : a state-ofthe- art literature review, International Journal of Management Review, 9, 53-80 https://doi.org/10.1111/j.1468-2370.2007.00202.x
  104. Steinhilper, R., Remanufacturing : The Ultimate Form of Recycling, Fraunhofer IRB Verlag (1998)
  105. Stock, J. R. (1998), Development of Implementation of Reverse Logistics Programs, Council of Logistics management, Oak Brook, Illinois
  106. Teunter, R. H. (2001), Economic order quantities for recoverable item inventory systems. Naval Research Logistics, 48, 484-495 https://doi.org/10.1002/nav.1030
  107. Teunter, R. H. (2004), Lot-sizing for inventory systems with product recovery. Computers and Industrial Engineering, 46, 431-441 https://doi.org/10.1016/j.cie.2004.01.006
  108. van der Laan, E. A., Dekker, R. and Salomon, M. (1996a), Product manufacturing and disposal : a numerical comparison of alternative control strategies, International Journal of Production Economics, 45, 489-498 https://doi.org/10.1016/0925-5273(95)00137-9
  109. van der Laan, E. A., Dekker, R., Salomon, M. and Ridder, A. (1996b), An (s, Q) inventory model with remanufacturing and disposal, International Journal of Production Economics, 46, 339-350 https://doi.org/10.1016/0925-5273(95)00020-8
  110. Vesilind, A. P., Worell, W., and Reinhart, D., Solid Waste Engineering, Brook/Cole (2002)
  111. Wu, H.-J. and Dunn, S. C. (1994), Environmentally responsible logistics systems, International Journal of Physical Distribution and Logistics Management, 25, 20-38
  112. Zhang, H. C., Kuo, T. C., Lu, H., and Huang, S. H. (1997), Environmentally conscious design and manufacturing : a state-of-the-art survey, Journal of Manufacturing Systems, 16, 352-371 https://doi.org/10.1016/S0278-6125(97)88465-8
  113. Zussman, E. (1995), Planning of disassembly systems, Assembly Automation, 15, 20-23