References
- Lee, S. H., Yi, B. J. and Kwak, Y. K., 'Performance Analysis and Optimal Actuator Sizing for Anthropomorphic Robot Modules with Redundant Actuation,' Journal of the Korean Society of Mechanical Engineers, Vol. 19, No. 1, pp. 181-192, 1995
- Kim, S. B., 'Operational quality analysis of parallel manipulators with actuation redundancy,' IEEE International Conference on Robotics and Automation, pp. 2651-2657, 1997
- Yi, B. J., Kim, W. K. and Kim, D. K., 'Analysis for Fault Tolerant Capabilities of Robots with Kinematic and Force Redundancies,' Journal of the Korean Society of Mechanical Engineers, Vol.19, No. 11, pp. 2927-2938, 1995
- Park, D. I., Lee, S. H. and Kim, S. H., 'Torque distribution using a weighted pseudoinverse in a redundantly actuated mechanism,' VSP and Robotics Society of Japan, Vol. 17, No. 8, pp. 807-820, 2003
- Kock, S. and Schumacher, W., 'A Parallel x-y Manipulator with Actuation Redundancy for High-Speed and Active-stiffness Application,' IEEE International Conference on Robotics and Automation, Vol. 3, pp. 2295-2300, 1998
- Park, J. H, Chung, W. K. and Youm, Y. G., 'Weighted Decomposition of Kinematics and Dynamics of Kinematically Redundant Manipulators,' IEEE International Conference on Robotics and Automation, Vol. 1, pp. 480-486, 1996
- Tsai, L. W., 'Robot Analysis - The Mechanics of Serial and Parallel Manipulators,' John Wiley & Sons INC, pp. 223-231, 1999
- Kim, T. J., Yi, B. J. and Suh, H., 'Load Distribution Algorism and Experimentation for a Redundantly Actuated, Singularity-free 3-DOF Parallel Haptic Device,' IEEE/RSJ International Conference on Intelligent Robot and system, Vol. 3, pp. 2899-2904, 2004
- Lee, S. H., 'Control of active stiffness and impact disturbance by redundantly actuated mechanism,' Ph. D. Thesis, KAIST, 2001
- Ropponen, T. and Nakamura, Y., 'Singularityfree parameterization and performance analysis of actuation redundancy,' IEEE International Conference on Robotics and Automation, Vol. 2, pp. 806-811, 1990
- Kim, J. S., Kim, W. K. and Cho, W., 'Study on the Precision Characteristics of a Planar 3 Degrees-of-Freedom Parallel Mechanism,' Proceedings of the Korean Society for Precision Engineering Autumn Conference, pp. 781-786, 1996
- Ryu, G. H. and Cho, B. K., 'A Study on the Kinematic Analysis of a 6-DOF Parallel Robot Manipulator,' Journal of the Korean Society for Precision Engineering, Vol. 12, No. 5, pp. 149-156, 1995
- Jeong, J. I. and Kim, J. W, 'Kinematic Calibration Method for Redundantly Actuated Parallel Mechanisms,' Proceedings of the Korean Society for Precision Engineering Autumn Conference, pp. 355-360, 2002