References
- Mayle, R. E. and Metzger, D. E., 1982,'Heat Transfer at the Tip of an Unshrouded Turbine Blade,' Proceedings of 7th International Heat Transfer Conference, Vol. 3, pp. 87-92
- Chyu, M. K., Moon, H. K. and Metzger, D. E., 1989,'Heat Transfer in the Tip Region of Grooved Turbine Blades,' ASME Journal of Turbomachinery, Vol. 111, pp. 131-138 https://doi.org/10.1115/1.3262247
- Metzger, D. E., Dunn, M. G. and Hah, C., 1992,'Turbine Tip and Shroud Heat Transfer,' ASME Journal of Turbomachinery, Vol. 113, pp. 502-507 https://doi.org/10.1115/1.2927902
- Moore, J., Moore, J. R, Henry, G. S. and Chaudhry, U., 1989,'Flow and Heat Transfer in Turbine Tip Gaps,' ASME Journal of Turbomachinery, Vol. 111, pp. 301-309 https://doi.org/10.1115/1.3262269
- Ameri, A. A., Steinthorsson, E. and Rigby, D. L., 1999,'Effect of Tip Clearance and Casing Recess on Heat Transfer and Stage Efficiency in Axial Turbines,' ASME Journal of Turbomachinery, Vol. 121, pp. 683-693 https://doi.org/10.1115/1.2836720
- Azad, Gm. S., Han, J.-C., Teng, S. and Boyle, R. J., 2000,'Heat Transfer and Pressure Distributions on a Gas Turbine Blade Tip,' ASME Journal of Turbomachinery, Vol. 122, pp. 717-724 https://doi.org/10.1115/1.1308567
- Azad, Gm. S., Han, J.-C. and Boyle, R. J., 2000,'Heat Transfer and Pressure Distributions on the Squealer Tip of a Gas Turbine Blade,' ASME Journal of Turbomachinery, Vol. 122, pp. 725-732 https://doi.org/10.1115/1.1311284
- Bunker, R. S., Bailey, J. C. and Ameri, A. A., 2000,'Heat Transfer and Flow on the First-Stage Blade Tip of a Power Generation Gas Turbine: Part 1-Experimental Results,' ASME Journal of Turbomachinery, Vol. 122, pp. 263-271 https://doi.org/10.1115/1.555443
- Ameri, A. A. and Bunker, R. S., 2000,'Heat Transfer and Flow on the First-Stage Blade Tip of a Power Generation Gas Turbine: Part 2-Simulation Results,' ASME Journal of Turbomachinery, Vol. 122, pp. 272-277 https://doi.org/10.1115/1.555444
- Ameri, A. A., 2001,'Heat Transfer and Flow on the Blade Tip of a Gas Turbine Equipped With a Mean-Camberline Strip,' ASME Journal of Turbomachinery, Vol. 123, pp. 704-708 https://doi.org/10.1115/1.1400114
- Kwak, J. S., Ahn, J. Han, J-C, Lee, C. P., Bunker, R. S., Boyl, R. and Gaugler, R., 2003,'Heat Transfer Coefficients on the Squealer Tip and Near-Tip Regions of a Gas Turbine Blade With Single or Double Squealer,' ASME Journal of Turbomachinery, Vol. 125, pp. 778-787 https://doi.org/10.1115/1.1626684
- Saxena, V., Nasir, H., and Ekkad, S. V., 2004,'Effect of Blade Tip Geometry on Tip Flow and Heat Transfer for a Blade in a Low-Speed Cascade,' ASME Journal of Turbomachinery, Vol. 126, pp. 130-138 https://doi.org/10.1115/1.1643385
- Nasir, H., Ekkad, S. V., Kontrovitz, D, M., Bunker, R. S. and Prakash, C., 2004,'Effect of Tip Gap and Squealer Geometry on Detailed Heat Transfer Measurements Over a High Pressure Turbine Rotor Blade Tip,' ASME Journal of Turbomachinery, Vol. 126, pp. 221-228 https://doi.org/10.1115/1.1731416
- Newton, P. J., Lock, G. D., Krishnababu, S. K., Hodson, H. P., Dawes, W. N., Hannis, J. and Whitney C., 2006,'Heat Transfer and Aerodynamics of Turbine Blade Tips in a Linear Cascade,' ASME Journal of Turbomachinery, Vol. 128, pp. 300-309 https://doi.org/10.1115/1.2137745
- Goldstein, R. J. and Cho, H. H., 1995,'A Review of Mass Transfer Measurements Using Naphthalene Sublimation,' Experimental Thermal and Fluid Science, Vol. 10, pp. 416-434 https://doi.org/10.1016/0894-1777(94)00071-F
- Ambrose, D., Lawrenson, I. J. and Sprake, C. H. S., 1975,'The Vapour Pressure of Naphthalene,' J. Chem. Thermodynamics, Vol. 7, pp. 1173-1176 https://doi.org/10.1016/0021-9614(75)90038-5
- Lee, S. W., Jun, S. B., Park, B. K. and Lee, J. S., 2004,'Effects of Combustor-Level High Inlet Turbulence on the Endwall Flow and Heat/Mass Transfer of a High-Turning Rotor Cascade,' KSME Int. J., Vol. 18, pp. 1435-1450
- Jun, S. B., 2000, Measurements of Endwall Heat (Mass) Transfer Coefficient in a Linear Turbine Cascade Using Naphthalene Sublimation Technique, MS thesis, Kumoh National Institute of Technology
- Abernethy, R. B., Benedict, R. P. and Dowdell, R. B., 1985,'ASME Measurement Uncertainty,' ASME Journal of Fluids Engineering, Vol. 107, pp. 161-164 https://doi.org/10.1115/1.3242450
- Kwon, H. G. and Lee, S. W., 2007,'Heat/ Mass Transfer Characteristics in the Near-Tip Region on a Turbine Blade Surface Under Combustor-Level High Inlet Turbulence,' Journal of Mechanical Science and Technology, Vol. 21, pp. 486-494 https://doi.org/10.1007/BF02916310
Cited by
- Heat/Mass Transfer Characteristics on the Squealer Tip Surface of a Turbine Rotor Blade vol.12, pp.1, 2009, https://doi.org/10.5293/KFMA.2009.12.1.035
- A Study on the Model of Thermal Plume Flow in the Forest Fire vol.12, pp.1, 2009, https://doi.org/10.5293/KFMA.2009.12.1.007
- vol.12, pp.1, 2009, https://doi.org/10.5293/KFMA.2009.12.1.070