DOI QR코드

DOI QR Code

Expansion Characteristics of the Hydrated Sodium Silicate which Synthesized by Hydrothermal Reaction

열수반응으로 합성된 수화규산소다의 팽창 특성

  • Cho, Ho-Yeon (Department of Materials Science and Engineering, Chungnam National University) ;
  • Kong, Yang-Pyo (Korea Institute of Construction Materials) ;
  • Suhr, Dong-Soo (Department of Materials Science and Engineering, Chungnam National University)
  • Published : 2008.12.31

Abstract

Hydrated sodium silicate was synthesized by hydrothermal reaction using anhydrous sodium silicate. The optimum additions of water was 25wt% to make hydrated sodium silicate with homogeneous and purposed water contents. Porous ceramics with homogeneous microstructure and spherical closed pore can be fabricated by elimination of the large pores(a few mm in size) which was formed during first heat treatment through the decomposition of water. Spherical closed pore was formed above $600^{\circ}C$ and the pore size was increased with increasing second heat treatment temperature due to growth of pores. The size of spherical closed pore was varied from 35 to $233\;{\mu}m$ and specific gravity was varied from 0.2 to 1.02 depending on the combinations of the first and second heat treatment temperature.

Keywords

References

  1. J. Y. Yoon, I. H. Song, D. S. Park, and H. D. Kim, "A Technical Trend of the Porous Material," KIMM, 15 [3] 98-108 (2004)
  2. J. S. Woyansky and C. E. Scott, "Processing of Porous Ceramics," J. Am. Ceram. Soc. Bull., 71 [11] 1674-80 (1992)
  3. G. Y. Jang, S. R. Kim, K. H. Lee, and J. H. Jung, "Manufacturing Method of Porous Ceramics(in Korean)," J. Kor. Ceram. Soc. Bull., 10 [2] 193-202 (1995)
  4. S. M. Han, D.Y. Shin, and S. K. Kang, "Preparation for Porous Ceramics Using Low Grade Clay(in Korean)," J. Kor. Ceram. Soc., 35 [6] 575-82 (1998)
  5. J. K. Park and J. D. Lee, "Preparation of Porous Inorganic Materials by Foaming Slurry(in Korean)," J. Kor. Ceram. Soc., 35 [12] 1280-88 (1998)
  6. Y. S. Choi and H. K. Kim, "Research of Incombusitible Low Vacuum Insulating Material Using Silica Gel," Ministry of Commerce, Industry and Energy, 3-13 (2005)
  7. T. Fujiu, "Processing and Properties of Cellular Silica Synthesized by Foaming Sol-Gels," J. Am. Ceram. Soc., 73 [1] 85-92 (1990) https://doi.org/10.1111/j.1151-2916.1990.tb05095.x
  8. Y. P. Kong, S. H. Seo, J. H. Kim, and D. S. Suhr, "Characteristics of Porous Ceramics Depending on Water Content of the Water Glass and Heat Treatment Temperature(in Korean)," J. Kor. Ceram. Soc., 42 [10] 691-7 (2005) https://doi.org/10.4191/KCERS.2005.42.10.691
  9. H. S. Yu, D. H. Yang, K. I. Rhee, and C. K. Lee, "Transformation and Morphology of Crystalline Phases in the Hydrothermal Processing of Amorphous Silica(in Korean)," J. Kor. Ins. Mineral & Energy Res. Eng., 38 [2] 69-75 (2001)
  10. S. K. Yang, S. H. Jung, and J. B. Kang, "Fabrication of Porous Ceramics for Microorganism Carrier by Hydrothermal Reaction(in Korean)," J. Kor. Ceram. Soc., 40 [12] 1213-19 (2003) https://doi.org/10.4191/KCERS.2003.40.12.1213
  11. B. H. Kim and Y. H. Na, "Characteristics of Porous Wollastonite Ceramics Fabricated by Hydrothermal Synthesis(in Korean)," J. Kor. Ceram. Soc., 32 [8] 893-900 (1995)
  12. Y. P. Kong, H. Y. Cho, and D. S. Suhr, "Expansion Characteristics of the Hydrated Sodium Silicate(in Korean)," J. Kor. Ceram. Soc., 45 [1] 54-9 (2008) https://doi.org/10.4191/KCERS.2008.45.1.054
  13. Y. P. Kong, H. Y. Cho, and D. S. Suhr, "Characteristics Changes of the Hydrated Sodium Silicate Depending on Heat Treatment Temperature(in Korean)," J. Kor. Ceram. Soc., 45 [3] 185-89 (2008) https://doi.org/10.4191/KCERS.2008.45.3.185