Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Development of a Measurement System for High-Speed Spindle Displacement

고속 스핀들의 변위측정 시스템 개발

  • 김효곤 (창원대학교 기계설계공학과 대학원) ;
  • 정원지 (창원대 기계설계공학과) ;
  • 주지훈 (창원대 기계설계공학과 대학원) ;
  • 조영덕 (창원대 기계설계공학과 대학원)
  • Published : 2008.12.15
Download PDF
⟨ Previous Next ⟩

Abstract

At present many research projects on high-speed spindles are being conducted. These projects require a measurement technique which includes heat expansion, vibration and displacement measurement according to angular velocity. This paper presents the development of a measurement system for high-speed spindle displacement. The measurement system is based on $LabView^{(R)}$ and features the following sensors: optical sensor which reacts to the position of a marker on the spindle and enables two Laser Displacement Sensors(LDS). These Laser Displacement Sensors send their data to a DAQ(Data Acquisition Device). It is important that the delay time caused by the response times of the sensors as well as the sampling rate of the DAQ is considered because the spindle revolves at very high speeds.

Keywords

References

  1. Kim, S. W., 1999, "Research on the Effect of Cutter Wear on the Torsional Vibration of Spindle in Milling," Korean Society of Precision Engineering, Vol. 16, No. 9, pp. 62-67
  2. Beckwith, T. G. and Roy, D. M., 1993, Mechanical Measurements, Prentice Hall, pp. 104-118
  3. Bruce, 2001, LabVIEW for Data Acquisition with CDROM, Prentice Hall PTR, USA, pp. 151-172
  4. Nam, Y. S., Kim, H. G., Yoo, N. S., and Lee, J. W., 2003, "Development of a Wind Turbine Monitoring System using LabVIEW," Journal of the Korean Society of Precision Engineering, Vol. 20, No. 5, pp. 92-98
  5. McDonough, A. L., 2000, Data Acquisition & Analysis for the Movement Sciences, T-Mecha, USA, pp. 221-243
  6. Choi, S. J., 2002, "Graphical Programming Language," Journal of the Korean Society of Machine Tool Engineers, Vol. 11, No. 3, pp. 39-46
  7. Liu Z. X. and Zhang D. W., 2006, "A high-speed cutting temperature measurement equipment based on semi-manual thermocouple method," Modular Machine Tool & Automatic Manufacturing Technique, Vol. 4, pp. 59-61