Abstract
This paper designed a efficient 8-bit CMOS analog-to-digital converter(ADC) for an SOC(System On Chip) application. The architecture consists of two modified 4-bit full-flash ADCs, it has been designed using a more efficient architecture. This is to predict roughly the range in which input signal residers and can be placed in the proximity of input signal based on initial prediction. The prediction of input signal is made available by introducing a voltage estimator. For 4-bit resolution, the modified full-flash ADC need only 6 comparators. So a 8-bit ADC require only 12 comparators and 32 resistors. The speed of this ADC is almost similar to conventional full-flash ADC, but the die area consumption is much less due to reduce numbers of comparators and registors. This architecture uses even fewer comparator than half-flash ADC. The circuits which are implemented in this paper is simulated with LT SPICE tool of computer.
본 논문은 SOC 응용을 위한 효율적인 8비트 AD 변환기(Analog-to-Digital Converter)를 설계하였다. 이 구조는 2개의 수정된 4 비트 플래시 AD 변환기로 구성되었고, 그것은 기존의 플래시 AD 변환기 보다 더 효율적인 구조를 가지고 있다. 이것은 입력신호에 연결된 저항들의 일정 범위를 예측하고 초기 예측을 기반으로 입력신호에 가까운 위치를 정한다. 입력신호의 예측은 전압예측기에 의하여 가능하다. 4비트 해상도를 가진 경우 수정된 플래시 AD 변환기는 단지 6개의 비교기가 필요하다. 그러므로 8비트 AD 변환기는 12개의 비교기와 32개의 저항을 사용한다. 이 AD 변환기의 변환속도는 기존의 플래시 AD 변환기와 거의 같지만 비교기와 저항의 수가 줄어들기 때문에 다이의 면적의 소모를 현저하게 줄일 수 있다. 이것은 반 플래시 AD 변환기보다 더 적은 비교기를 사용한다, 본 논문에서 구현한 회로들은 LT SPICE 컴퓨터 소프트웨어 툴을 이용하여 시뮬레이션 하였다.