Abstract
In this study, we estimate solar surface insolation (SSI) by using physical methods with MTSAT-1R data. SSI is regarded as crucial parameter when interpreting solar-earth energy system, climate change, and agricultural production predict application. Most of SSI estimation model mainly uses ground based-measurement such as pyranometer to tune the constructed model and to validate retrieved SSI data from optical channels. When compared estimated SSI with pyranometer measurements, there are some systemic differences between those instruments. The pyranometer data observed upward-looking hemispherical solid angle and distributed hourly measurements data which are averaged every 2 minute instantaneous observation. Whereas MTSAT-1R channels data are taken instantaneously images at fixed measurement time over scan area, and are pixel-based observation with a much smaller solid angle view. Those temporal discrepancies result from systemic differences can induce validation error. In this study, we adjust hour when estimate SSI to improve the retrieved accurate SSI.
본 연구에서는, MTSAT-1R 위성 자료를 이용하여 표면도달일사량 (SSI: Solar Surface Insolation)을 산출한다. 표면도달일사량은 태양-지구에너지시스템, 기후변화, 그리고 농업 생산 예측 모델 활용과 같은 다양한 분야에 사용되는 주요 변수이다. 대부분의 표면도달일사량 산출모델은 지상 관측 일사계 자료를 이용하여 모델의 검 보정을 수행한다. 위성자료를 이용하여 산출된 표면도달일사량과 지상 관측 일사값을 서로 비교할 때, 기기 차에 의해 발생하는 시스템 오차가 존재한다. 지상 관측 일사계의 경우에는 2분마다 관측된 전천 일사량을 평균하여 시간일사 대푯값으로 제공하다. 반면 위성을 이용하여 산출된 표면 도달일사량의 경우에는, 특정시간에 대한 순간 관측 값을 이용하며, 단위 화소 크기에 대한 공간 해상도로 제공된다. 시스템 차에 의해 발생하는 시간적 불일치는 지상 관측 값과의 검 보정 시, 오차 값을 포함한다. 본 연구에서는, 시간 불일치 조정을 통해 보다 향상된 표면도달일사량 검증 기법을 제공하고자 한다.