References
- M.M. Haque, M.A. Maleque: Journal of Materials processing technology, "Effect of process variables on structure and properties of aluminium-silicon piston alloy", 77(1998),122-128 https://doi.org/10.1016/S0924-0136(97)00409-3
- J. Qiao, X. Liu, X. Bian, et al: Materials letters, "Relationship between microstructures and contents of Ca/P in near-eutectic Al-Si piston alloys", 59(2005), 1790-1794 https://doi.org/10.1016/j.matlet.2005.01.068
- R. Li, D. Li, Y. Zhao, et al: Materials letters, "Age-hardening behavior of cast Al-Si base alloy", 58(2004), 2096-2101 https://doi.org/10.1016/j.matlet.2003.12.027
- M.M. Haque, A. Sharif: Journal of materials processing technology, "Study on wear properties of aluminium-silicon piston alloy", 118(2001), 69-73 https://doi.org/10.1016/S0924-0136(01)00869-X
- Y.L. Bai, W.M. Mao, S.F. Gao, et al: Materials, "Filling ability of semi-solid A356 aluminum alloy slurry in rheo-diecasting", 15(2008), 48-52
- W.M. Mao, H. Lin, Y.L. Bai, et al: Materials, "New method for the preparation of semi-solid AlSi7Mg alloy slurry", 14(2007), science & Engineering A, "Solidification behavior under intensive forced convection", 413-414(2008), 29-235. 56-60
- Z. Fan, G. Liu, M. Hitchcock: Materials [8] B.K. Dhindaw, L. Kumar, N.C. A. Alkarkhi, et al: Materials science & engineering A, "Microstructure development and solute redistribution in aluminium alloys under low and moderate shear rates during rheo processing", 413-414(2005), 156-164 https://doi.org/10.1016/j.msea.2005.08.182
- D.H. Lu, Y.H. Jiang, G.S. Guan, et al: Journal of Materials Processing Technology, "Refinement of primary Si in hypereutectic Al-Si alloy by electromagnetic stirring", 189(2007), 13-18 https://doi.org/10.1016/j.jmatprotec.2006.12.008
- A. Ohno, T. Motegi: Solidification technology in the foundry and cast house, "Grain size control in castings", (1980), 171-175
- O. Lashkari, S. Nafisi, R. Ghomashchi: Materials science & engineering, "Microstructural characterization of rheo-cast billets prepared by variant pouring temperatures", 441(2006), 49-59 https://doi.org/10.1016/j.msea.2006.05.075
- C. P. Hong, J. M. Kim: Proceedings of modeling of casting and solidification processes VII, "Development of an advanced rheo-diecasting technique based on H-NCM", (2007), 9-16