References
- Mba, D. and Raj B. K. N. Rao, 2006, 'Development of Acoustic Emission Technology for Condition Monitoring and Diagnosis of Rotating machines: Bearings, Pumps, Gearboxes, Engines, and Rotating Structures,' The Shock and Vibration Digest, Vol. 38, No. 1, pp. 3-16 https://doi.org/10.1177/0583102405059054
- Shiroishi, J., Li, Y., Liang, S., Kurfess, T. and Danyluk, S., 1997, 'Bearing Condition Diagnosis Via Vibration and Acoustic Emission Measurements,' Mechanical Systems and Signal Processing, Vol. 11, No. 5, pp. 693-705 https://doi.org/10.1006/mssp.1997.0113
- Shiroishi, J., Li, Y., Liang, S., Danyluk, S. and Kurfess, T., 1999, 'Vibration Analysis for Bearing Outer Race Condition Diagnosis,' Journal of Brazil Society Mechanical Science, Vol. 21, No. 3, pp. 484-492 https://doi.org/10.1590/S0100-73861999000300010
- Kim, Y. H., Andy, C. C. Tan, Joseph, M., Vladis, K. and Yang, B. S., 2007, 'A Comparative Study on the Application of Acoustic Emission Technique and Acceleration Measurements for Low Speed Condition Monitoring,' Proceedings of the 12th Asia-Pacific Vibration Conference(APVC2007)
- Berry, J. E., 1994, IRD Advancement Training Analysis II - Concentrated Vibration Signature Analysis and Related Condition Monitoring Techniques, IRD Mechanalysis, Inc., pp. 6-149-6-155
- Signal Processing Toolbox User's Guide, Math Works, Inc., 1999
- Randall, R. B, 1987, 'Frequency Analysis,' Bruel & Kjaer Book
- Mba, D. and Bannister, R. H. and Findlay, G. E., 1999, 'Condition Monitoring of Low Speed Rotating Machinery Using Stress Waves : Part1 and Part2,' Proc. Inst. Mech. Eng. 213(3, Part E), pp. 153-185
- Mba, D., 2001, 'The Detection of Shaft-seal Rubbing in Large-scale Turbines Using Acoustic Emission,' 14th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM'2001), Manchester, UK, 4-6 September 2001, pp. 21-28
- Mba, D., Cooke, A., Roby, D. and Hewitt, G., 2003, 'Opportunities Offered by Acoustic Emission for Shaft-steal Rubbing in Power Generation Turbines : A Case Study,' International Conference on Condition Monitoring. Oxford, sponsored by the British Institute of NDT UK, pp. 280-286
- Kim, Y. H., Andy, C. C. Tan, Joseph, M. and Yang, B. S., 2007, 'Experimental Study on Incipient Fault Detection of Low Speed Rolling Element Bearings : Time Domain Statistical Parameters,' 12th Asia-Pacific Vibration Conference(APVC2007)
- Ronnie, K. M., Eric, V. K. H. and Patrick, O. M., 2005, Nondestructive Testing Handbook Volume 6 - Acoustic Emission Testing, American Socierty for Nondestructive Testing, Columbus
- Park, K. H., Jung, S. J., Wee, H., Kim, J. S., Han, K. S. and Kim, M. H., 2008, 'A Study on the Fault Detection of Auto-transmission according to Gear Damage,' Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 18, No.1, pp. 47-56 https://doi.org/10.5050/KSNVN.2008.18.1.047