Artificial Muscle Actuator Based on the Synthetic Elastomer

  • Chuc, Nguyen Huu (Department of Mechanical Engineering, Sungkyunkwan University) ;
  • Koo, Ja-Choon (Department of Mechanical Engineering, Sungkyunkwan University) ;
  • Lee, Young-Kwan (Department of Chemical Engineering, Sungkyunkwan University) ;
  • Nam, Jae-Do (Polymer System Engineering, Sungkyunkwan University) ;
  • Choi, Hyouk-Ryeol (Department of Mechanical Engineering, Sungkyunkwan University)
  • Published : 2008.12.31

Abstract

In this paper, we present an artificial muscle actuator producing rectilinear motion, called the Tube-Spring-Actuator(TSA). The TSA is supposed to be a prospective substitute in areas requiring macro forces such as robotics. It is simply configured from a synthetic elastomer tube with an inserted spring. The design of the TSA is described in detail and its analysis is conducted to investigate the characteristics of the actuator based on the derived model. In addition, the performance of the proposed actuator is tested via experiments.

Keywords

References

  1. K. J. Kim and S. Tadokoro, Electroactive Polymer for Robotic Applications, Springer, 2007
  2. R. Pelrine, R. Kornbluh, and J. Joseph, "Electrostriction of polymer dielectrics with compliant electrodes as a means of actuation," Sensors and Actuators A, vol. 64, pp. 77-85, 1998 https://doi.org/10.1016/S0924-4247(97)01657-9
  3. R. Pelrine, R. Kornbluh, Q. Pei, and J. Joseph, "High-speed electrically actuated elastomer with strain greater than 100%," Science, vol. 287, pp. 836-839, 2000 https://doi.org/10.1126/science.287.5454.836
  4. R. Pelrine, R. Kornbluh, Q. Pei, J. Joseph, and M. Rosenthal, "Electroelastomer rolls and their application for biomimetic walking robots," Synthetic Metal, vol. 135, pp. 129-131, 2003 https://doi.org/10.1016/S0379-6779(02)00535-0
  5. F. Carpi, A. Migliore, and D. Rossi, "A new contractile linear actuator made of dielectric elastomers," Proc. SPIE. on Smart Structures and Materials: Electroactive Polymer Actuators and Devices (EAPAD), vol. 5759, pp. 64-74, 2005
  6. J. C. Koo, K. M. Jung, J. K. Park, J. Nam, Y. K. Lee, J. W. Jeon, and H. R. Choi, "Representation of a conceptual design for a rectilinear motion polymer actuator," International Journal of Control, Automation and Systems, vol. 5, no. 4, pp. 429-435, 2007
  7. H. R. Choi, K. M. Jung, S. M. Ryew, J. D. Nam, J. W. Jeon, J. C. Koo, and K. Tanie, "Biomimetic Soft Actuator: Design, Modelling, Control and Applications," IEEE/ASME Trans. on Mechatronics, vol. 10, no. 5, pp. 581-593, 2005 https://doi.org/10.1109/TMECH.2005.856108
  8. M. Y. Jung, K. M. Jung, N. H. Chuc, I. M. Koo, J C. Koo, Y. K. Lee, J. D. Nam, and H. R. Choi, "Fabrication and characterization of linear motion dielectric elastomer actuators," Proc. SPIE. on Smart Structures and Materials: Electroactive Polymer Actuators and Devices (EAPAD), vol. 6168, pp. 6168241-7, 2006
  9. A. Rajamani, M. Grissom, C. Rahn, Y. Ma, and Q. Zhang, "Wound roll dielectric elastomer actuators: Fabrication, analysis and experiments," Proc. of IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 1520-1525, 2005
  10. A. Wingert, M. D. Lichter, and S. Dubowsky, "On the design of large degree-of-freedom digital mechatronic devices based on bistable dielectric elastomer actuators," IEEE/ASME Trans. on Mechatronics, vol. 11, no. 4, pp. 448-456, 2006 https://doi.org/10.1109/TMECH.2006.878542
  11. K. M. Jung, J. H. Lee, M. S. Cho, J. C. Koo, J. D. Nam, Y. K. Lee, and H. R. Choi, "Development of enhanced synthetic elastomer for the energy efficient polymer actuators," Smart Materials and Structures, vol. 16, pp. S288-S294, 2007 https://doi.org/10.1088/0964-1726/16/2/S13
  12. C. M. Hackl, H. Y. Tang, R. D. Lorenz, L. S. Turng, and D. Schroder, "A Multidomain model of planar electro-active Polymer Actuators," IEEE Trans. on Industry Application, vol. 41, no. 5, pp. 1142-1148, 2005 https://doi.org/10.1109/TIA.2005.853384
  13. Y. M. Haddad, Viscoelasticity of Engineering Material, Chapman & Hall, 1995