Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Transfer Path Analysis and Interior Noise Estimation of the Road Noise Using Multi-dimensional Spectral Analysis Method

다차원 스펙트럼 해석법을 이용한 로드노이즈의 전달경로 해석 및 실내음압 예측

  • Published : 2008.11.20
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents a the method for estimating the noise source contribution on the road noise of the vehicle in a multiple input system where the input sources may be coherent with each other. By coherence function method, it is found that the biggest part of the noise source in the road noise is generated by structural vibration on the mechanical-acoustic transfer functions of vehicles. This analysis is modeled as four input/single output system because the noise is generated with four wheels that mechanism of the road noise is very complicated. The coherence function method is proved to be useful tool for identifying of noise source. The overall levels of the interior noise be coherence function method are compared with those measured and calculated by the frequency response function approach using mechanical excitation test. The experimental results have shown a good agreement with the results calculated by the coherence function method when the input sources are coherent strongly each other. The estimation of the road noise indicates that significant coherent can be achieved in the vehicle interior noise.

Keywords

References

  1. Oh, J. E., Suh, S. H. and Kang, M. S., 1986, 'Application of Multi-dimensional Spectral Analysis for Noise Source Identification on Gasoline Engine', Trans. of the KSME, Vol. 10, No. 4, pp. 442-449
  2. Sim, H. H., Lee, H. J., Lee, Y. Y., Lee, J. Y. and Oh, J. E., 2006, 'Source Identification of Non-stationary Sound Vibration Signals Using Multi-dimensional Spectral Analysis Method', Trans. of the KSME(A), Vol. 30, No. 9, pp. 1154-1159 https://doi.org/10.3795/KSME-A.2006.30.9.1154
  3. Kim, H. S., Park, S. G., Kang, K. H., Lee, J. Y. and Oh, J. E., 2007, 'The Analysis of Noise Contribution about Drum Washer under Dehydrating Condition Using Multi-dimensional Spectral Analysis', Transactions of the Korean Society for Noise and Vibration Engineering,Vol. 17, No. 11, pp. 1056-1063 https://doi.org/10.5050/KSNVN.2007.17.11.1056
  4. Bendat, J. S. and Piersol, A. G,, 1980, 'Engineering Application of Correlation and Spectral Analysis', John Wiley & Sons, Inc. 2nd Edition
  5. Bendat, J. S. and Piesol, A. G., 1986, 'Random Data': Analysis and Measurement Procedures, 2nd Edition, Wiley-Interscience, New York
  6. Oh, J. E., 1983 'Application of Multidimensional Spectral Analysis for Noise Identification on Mechanical Structures', Thesis of Doctor Eng. Tokyo Institute of Technology
  7. Song, C. G., Park, H., Oh, J. E. and Yum, S. H., 1990, 'Performance Improvement of a Vehicle Suspension by Sensitivity Analysis', Trans. of the KSME, Vol. 14, No. 6, pp. 1474-1486
  8. Ren, Y. and Beards, C. F., 1995, 'On Substructure Synthesis with FRF Data', Journal of Sound and Vibration, Vol. 185, No. 5, pp. 845-866 https://doi.org/10.1006/jsvi.1995.0421