Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Optimum Working Condition of Side Wall End Milling Using Response Surface Methodology

측벽 엔드밀 가공 시 반응표면법을 이용한 최적 가공조건

  • 홍도관 (한국전기연구원 전동력연구센터) ;
  • 최재기 (㈜한국단자공업 중앙연구소 선행연구팀) ;
  • 박진우 (동아대학교 일반대학원 기계공학과) ;
  • 백황순 (동아대학교 일반대학원 기계공학과) ;
  • 안찬우 (동아대학교 기계공학부)
  • Published : 2008.11.20
Download PDF
⟨ Previous Next ⟩

Abstract

Working condition is one of the most important factors in precision working. In this study, we optimized the vibration acceleration of working progress direction using RSM(response surface methodology) by table of orthogonal array. RSM was well adapted to make analytic model for minimizing vibration acceleration, created the objective function and saved a great deal of computational time. Therefore, it is expected that the proposed optimization procedure using RSM can be easily utilized to solve the optimization problem of working condition. The experimental results of the surface roughness and vibration acceleration showed the validity of the proposed working condition of side wall end-milling as it can be observed.

Keywords

References

  1. Merritt, H. E., 1965, 'Theory of Self-excited Machine-tool Chatter', Transactions of the American Society of Mechanical Engineers, Journal of Engineering for Industry, Vol. 87, pp. 447-454 https://doi.org/10.1115/1.3670861
  2. Elbestawi, M. A., Papazafiriou, T. A. and Du, R. X., 1991, 'In-process Monitoring of Tool Wear in Milling Using Cutting Force Signature', International Journal of Machine Tools & Manufacture, Vol. 31, No. 1, pp. 55-73 https://doi.org/10.1016/0890-6955(91)90051-4
  3. Tobias, S. A. and Fishwick, W., 1958, 'The Chatter of Lathe Tools under Orthogonal Cutting Conditions', Transactions of the American Society of Mechanical Engineers, Vol. 80, pp. 1079-1088
  4. Bae, C. H., Choi, K. H. and Lee, S. H., 2002, 'Determination of Optimal Excimer Laser Ablation Conditions using Genetic Algorithm', Journal of the Koran Society for Precision Engineering, Vol. 11, No. 6, pp. 17-23
  5. Hong, D. K., Woo, B. C. and Kang, D. H., 2006, 'Optimal Geometric Design of Transverse Flux Linear Motor Using Response Surface Methodology', Transactions of the Korean Institute of Electrical Engineerins, Vol. 55B, No. 10, pp. 498-503
  6. Lim, P. and Yang, G. E., 2007, 'Optimization of Finish Cutting Condition of Impeller with Fiveaxis Machine by Response Surface Method', Transactions of the Korean Society of Mechanical Engineers, Vol. 31A, No. 9, pp. 924-933 https://doi.org/10.3795/KSME-A.2007.31.9.924
  7. Park, C. K., Kim, Y. G., Bae, D. S. and Park, T. W., 2002, 'Efficient Optimization of the Suspension Characteristics Using Response Surface Model for Korean High Speed Train', Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 12, No. 6, pp. 461-468 https://doi.org/10.5050/KSNVN.2002.12.6.461
  8. Hong, D. K., Kim, D. Y. and Ahn, C. W., 2004, 'The Study on the Optimal Working Condition for Vibration, Surface Roughness and Cutting Temperature in End Milling', Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 14, No. 12, pp. 1322-1329 https://doi.org/10.5050/KSNVN.2004.14.12.1322