Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Machining Characteristics of SKS3 in Wire Cut Electrical Discharge Machining

합금공구강 SKS3의 와이어컷 방전가공 특성

  • Published : 2008.10.15
Download PDF
⟨ Previous Next ⟩

Abstract

In the wire cut electrical discharge machining, the optimal machining parameters setting satisfying the requirements of both high efficiency and good quality is very difficult because its process involves a series of complex physical phenomena and the machining parameters are numerous over diverse range. In this paper, the experimental investigation has been performed to find out the influence of the machining parameters on the machining performance such as cutting speed and surface roughness. The selected experimental parameters are no load voltage, discharge peak current and pulse-off time. The experimental results give the guideline for selecting suitable machining parameters.

Keywords

References

  1. Lim, S. H., Kim, J. H., Lee, W. R., and Park, J. S., 2002, "Optimum Selection of Machining Parameters of WEDM using Taguchi Method," Proceeding of KSMTE Autumn Conference 2002, pp. 123-128
  2. Kim, C. H. and Kang, J. W., 2006, "Machining Characteristics of WEDM due to Electrical Conductivity of Dielectric," Trans. of KSMTE, Vol. 15, No. 6, pp. 15-21
  3. Liao, Y. S., Huang, J. T., and Su, H. C., 1997, "A Study on the Machining-Parameters Optimization of Wire Electrical Discharge Machining," J. of Materials Processing Technology, Vol. 71, pp. 487-493 https://doi.org/10.1016/S0924-0136(97)00117-9
  4. Liao, Y. S. and Woo, J. C., 1997, "The Effects of Machining Setting on the Behavior of Pulse Trains in the WEDM Process," J. of Materials Processing Technology, Vol. 71, pp. 433-439 https://doi.org/10.1016/S0924-0136(97)82076-6
  5. Jinyoung Precision Machine Research Center, 1997, User Reference Manual JW-30A, Jinyoung Precision Machine Co. ltd., Republic of Korea
  6. Jinyoung Precision Machine Research Center, 1997, Machine Function Manual JW-30A, Jinyoung Precision Machine Co. ltd., Republic of Korea
  7. Jinyoung Precision Machine Research Center, 1997, Operator Manual JW-30A, Jinyoung Precision Machine Co. ltd., Republic of Korea
  8. Jinyoung Precision Machine Research Center, 1997, Machining Conditions JW-30A, Jinyoung Precision Machine Co. ltd., Republic of Korea
  9. Kim, G. S. and Jung, P. D., 1998, CNC EDM and wire-cut EDM, Munwondang, Republic of Korea, pp. 218-225