DOI QR코드

DOI QR Code

고강도 Fe계 합금의 고온 변형 특성

High Temperature Deformation Behavior of Fe-base High Strength Alloys

  • 권운현 (한국해양대학교 재료공학과) ;
  • 최일동 (한국해양대학교 기계소재공학부)
  • 발행 : 2008.09.30

초록

Fe-base amorphous alloy and two crystalline phases composite were fabricated. The effect of temperature and strain rate on mechanical properties was evaluated utilizing compression test. Mixture of non-crystalline and crystalline phases were found using X-ray diffraction (XRD) and differential thermal analysis (DTA) tests. Based on glass transition temperature and crystallization temperature. compression tests were performed in the temperature ranging from $560^{\circ}C$ to $700^{\circ}C$ with $20^{\circ}C$ interval. Relationship between microstructure, including fracture surface morphology, and mechanical behavior was studied. The peak stress of Fe-base amorphous alloy was over 2GPa and expected to have a good wear resistance, but it is expected hard to deform because of low ductility. The peak stress and elongation of two crystalline phases composite was over 1GPa and about 20%, therefore it is possible to deform high strength wear resistant materials such as engine valve.

키워드

참고문헌

  1. A. Inoue, H.M. Kimura, Sasamori K, Masumoto T : Mater Trans JIM 35(2) ; 85, 1994 https://doi.org/10.2320/matertrans1989.35.85
  2. Hays CC, Kim CP, Johnson WL :Phys Rev Lett 84(13) ; 2901, 2000 https://doi.org/10.1103/PhysRevLett.84.2901
  3. Hashimoto K. In: Sakurai Y, Hamakawa Y, Masumoto T, Shirae K, Suzuki K, editors : Current topics in amorphous materials: physics and technology. Elsevier Science Publishers B.V ; 167, 1993
  4. Wang JG, Choi BW, Nieh TG, Liu CT : J Mater Res 15(4) ; 913, 2000 https://doi.org/10.1557/JMR.2000.0130
  5. Inoue A, Miyauchi Y, Masumoto T : Mater Trans JIM 36(5) ; 689, 1995 https://doi.org/10.2320/matertrans1989.36.689
  6. Das J, Tang MB, Kim KB, Theissmann R, Baier F, Wang WH, et al. : Phys Rev Lett ; 94, 2005
  7. Yao KF, Ruang F, Yang YQ, Chen N : Appl Phys Lett ; 88, 2006
  8. A. Inoue and Y. Saotome : Metals 3 ; 51, 1993
  9. A. Inoue, Y. Kawamura, T. Shibata and K. Sasamori : Mater. Trans. JIM 37 ; 1337, 1996 https://doi.org/10.2320/matertrans1989.37.1337
  10. F. Spaepen :Acta Metall. 25 ; 407, 1977 https://doi.org/10.1016/0001-6160(77)90232-2
  11. Schroers J, Johnson WL : Phys Rev Lett ; 93, 2004
  12. Inoue A, Zhang W, Tsurui T, Yavari AR, Greer AL : Philos Mag Lett 85 ; 221, 2005 https://doi.org/10.1080/09500830500197724
  13. A. Inoue, T. Zhang, T. Masumoto : Mater. Trans. JIM 30 ; 965, 1989 https://doi.org/10.2320/matertrans1989.30.965
  14. A. Inoue : Acta Mater. 48 ; 279, 2000 https://doi.org/10.1016/S1359-6454(99)00300-6
  15. A. Inoue, T. Nakamura, N. Nishiyama, T. Masumoto : Mater. Trans. JIM 33 ; 937, 1992 https://doi.org/10.2320/matertrans1989.33.937
  16. A. Inoue : Mater. Trans. JIM 36 ; 866, 1995 https://doi.org/10.2320/matertrans1989.36.866
  17. A. Inoue, T. Zhang, N. Nishiyama, K. Ohba, T. Masumoto : Mater. Trans. JIM 34 ; 1234, 1993 https://doi.org/10.2320/matertrans1989.34.1234
  18. A. Inoue, H. Koshiba, T. Zhang, A. Makino : J. Appl Phys. 83 ; 1967, 1998 https://doi.org/10.1063/1.366923
  19. Spaepen, F. : 'A microscopic mechanism for steady state inhomogeneous flow in metallic glasses.' Acta Metall. 25 ; 407, 1977 https://doi.org/10.1016/0001-6160(77)90232-2
  20. Masumoto T, Maddin R. : Mater Sci Eng 19 ; 1, 1975 https://doi.org/10.1016/0025-5416(75)90002-6
  21. Pampilo CA. : Scripta Met 6 ; 915, 1972 https://doi.org/10.1016/0036-9748(72)90144-5
  22. R. Busch, W. Liu, W.L. Johnson : J. Appl. Phys. 83 ; 4134, 1998 https://doi.org/10.1063/1.367167
  23. Y. Kawamura, T. Nakamura, A. Inoue, T.T. Masumoto : Mater. Trans. JIM 40 ; 794, 1999 https://doi.org/10.2320/matertrans1989.40.794
  24. A. Masuhr, T.A. Waniuk, R. Busch, W.L. Johnson : Phys. Rev. Lett. 82 ; 2290, 1999 https://doi.org/10.1103/PhysRevLett.82.2290
  25. Y. Kawamura, A. Inoue : Appl. Phys. Lett. 77 ; 1114, 2000 https://doi.org/10.1063/1.1289502
  26. 이광석 : Zr계 벌크 비정질 합금의 과냉 액상 영역에서의 변형 거동과 구조 완화의 상관 관계, 2004
  27. D.W. Xing, Y.J. Yang, J. Shen, J.F. Sun : Materials Letters 62 ; 44, 2008 https://doi.org/10.1016/j.matlet.2007.04.073
  28. W.J. Wright, R.B. Schwarz, W.D. Nix, Mater. Sci. Eng., A Struc. Mater.: Prop. Microstruct. Process 319-321 2001
  29. C.T. Liu, L. Heatherly, D.S. Easton et al., Metal. Mater. Trans. 29A 1811, 1998
  30. Z.F. Zhang, J. Eckert, L. Schultz : Acta Mater. 51 ; 1167, 2003 https://doi.org/10.1016/S1359-6454(02)00521-9
  31. M. Stoica, J. Eckert, S. Roth, Z.F. Zhang, L. Schultz, W.H. Wang Intermetallics 13 ; 764, 2005 https://doi.org/10.1016/j.intermet.2004.12.016