References
- Abrams, M.S., "Compressive Strength of Concrete at Temperatures to 1600F", American Concrete Institute (ACI) SP 25, Temperature and Concrete, Detroit, Michigan(1971)
- Schneider, U., "Properties of materials at high temperatures-Concrete", RILEM-Committee 44- PHT, Department of Civil Engineering, University of Kassel, Kassel, June, 1985
- Schneider U., "Concrete at high temperatures-A general review", Fire Safety Journal, The Netherlands, pp.55-68(1988)
- Phan, L.T.; and Carino, N.J., "Review of mechanical properties of HSC at elevated temperature", Journal of Materials in Civil Engineering, American Society of Civil Engineers, vol. 10(1) pp.58-64(February, 1998) https://doi.org/10.1061/(ASCE)0899-1561(1998)10:1(58)
- Phan, L.T.; Lawson, J.R.; Davis, F.R., "Effects of elevated temperature exposure on heating characteristics, spalling, and residual properties of high performance concrete", RILEM Materials and Structures Journal, vol. 34 (236) (March 2001) 83-91 https://doi.org/10.1007/BF02481556
- George C. Hoff, "Fire Resistance of High-Strength Concretes for Offshore Concrete Platforms", Proceedings, Third CANMET/ACI International Conference, ACI SP-163, V.M. Malhotra, Editor, pp.53-87
- Gabriel Alexander Khoury, Yngve Anderberg, "Concrete Spalling Review", Report submitted to the Swedish National Road Administration, June 2000
- 권영진, 장재봉, 나철성, 김무한, "[특집]고성능 콘크 리트의 폭렬 현상과 대책에 관한 연구 동향", 콘크리트학회지, Vol.17, No.3 pp.20-25(2005)
- 한민철, 허영선, 한천구, "고강도콘크리트의 폭렬발생 및 방지메커니즘", 한국콘크리트학회지, Vol.19, No.1 (2007)
- 김현정, 최은규, 신영수, 이차돈, 권영진, "폴리프로필 렌 섬유를 혼입한 고강도 RC 및 SRC 압축부재의 온 도분포", 대한건축학회 학술발표대회 논문집, pp.261- 265(2006)
- 百晴基, "ポリプロポェン纖維を混入した設計基準强 度150 N/mm2 の超高强度コンクロ一トの耐火性に關 すろ實驗的硏究", コンクロ一ト工學年次論文集, Vol. 25, No.1(2003)
- 小阪英生, "超高强度コンクロ一トを用したRC柱の開 發", 大成建設技術センタ一報, 第36 (2003)
- 건축법 시행령 제2조 제1항 제7호의2, "건설교통부령 이 정하는 기준에 적합한 구조"(2000)
- 건설교통부령 523호 "건축물의 피난.방화구조 등의 기준에 관한 규칙"(2006)
- 本田義博1 大岡督2 藤敏之3 ; "高度コンク リ一トの耐火性能にする的究(その1 定常 の一軸試)", 日本建築學會大會學術講演梗集, Vol. 1996 pp.23-24(1996)
- Haack, A., "The European State of the Art of Concrete and Fire Safety in Tunnels", Japan Concrete Institute Annual Convention(2003)
- 한병찬, 권영진, 김재환, "화재온도를 받는 고인성. 고내화성 시멘트 복합체의 거동", Joumal of the Korea Concrete Institute, Vol. 19, No. 2, pp.189-197(2006) https://doi.org/10.4334/JKCI.2007.19.2.189
- Yun, H. D., "Manufacture/Construction/Structural Applications of High performance Fiber Reinforced Cementitious Composites", 2nd Korea-Japan International Joint Symposium, KOREA(2005)
- Kim, Y.Y, Kong, H-J, and Li, V.C., "Design of Engineered Cementitious Composite Suitable for Wet-mixture Shotcreting", ACI Material Journal, Vol. 100, No.6, pp.511-518(2003)
- 기술표준원 고시 제99-401호 건축 구조 부재의 내화 시험 방법 - 일반 요구 사항 KS F 2257-1(1999)
- ASTM C 215-91, "Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens"
- ASTM C 469-94, "Standard Test Method for Static Modules of Elasticity and Poisson's Ratio of Concrete in Compression"
- Wickstrom, U., "A very simple method for estimating temperatures", In fire Exposed structures, in New Technology to reduce Fire Losses and Costs(eds S.J. Grayson and D.A. Smith), Elseview Applied Science, London, UK, pp. 186-194(1986)
- Comite Europeen de Normalisation, "prENV 1992- 1-2: Eurocode 2: Design of Concrete Structures. Part 1 -2: Structural Fire Design", CEN/TC 250/SC 2(1993)