A Study on Characteristics of Knocking in Gasoline Engine through ECU Control

ECU 제어를 통한 가솔린 엔진의 노킹 특성에 관한 연구

  • Yang, Hyun-Soo (Dept. of Automotive & Mechanical Engineering, Kunjang college) ;
  • Lim, Ju-Hun (Dept. of Automobile Engineering, Seoul Automobile Highschool) ;
  • Chun, Dong-Jun (Dept. of Automobile Engineering, Byuksung college)
  • 양현수 (군장대학 자동차디지털공학부) ;
  • 임주헌 (서울자동차고등학교 자동차과) ;
  • 천동준 (벽성대학 자동차과)
  • Published : 2008.09.30

Abstract

A burning principle in gasoline engine is the one of being burned, by which a mixer in air and gasoline enters a combustion chamber and causes a spark in the proper timing. This is formed, by which ECU controls the fuel-injection volume and the fuel-injection timing, and determines the performance of engine. The purpose of this study is to test the characteristics on knocking in gasoline engine with the knocking-sensor equipment and to research into the characteristics in knocking while directly controling the optimal igniting timing and the fuel-injection timing through engine ECU. Given controlling ECU by grasping the characteristics in knocking, which becomes the most problem in the engine tuning market, the tuning in a true sense will be formed in gasoline engine.

Keywords

References

  1. LAURA.KISTLER, ANTHONY M, WAAS "Ipact response of cylindrically curved laminates including large deformation scaling study" Publish by Elsvier Science Ltd. Vol 21, pp. 61-75, 1998
  2. Dimitris A. Saravanos, Andreas P. Christoforou "Low-energy impact of adaptive cyindrical piezoelectric-composite shells", Internation Journal of Solids and structures Vol. 39, pp. 1757-1779, 2002 https://doi.org/10.1016/S0020-7683(02)00012-4
  3. Y. N. Kim and I. Y. Yang, "Impact Response and Damage of Composite Shell With Various Curvatures", Key Engineering Materials, Vol. 270-273, pp. 1911-1916, 2004 https://doi.org/10.4028/www.scientific.net/KEM.270-273.1911
  4. Y. N. Kim, K. H. Im and I. Y. Yang, "Characteristics of Impact Damages and Response in CFRP Composite Shells", Materials Science Forum, Vol. 465-466, pp. 247-252, 2004
  5. Im, K. H., Sim, J. K. and Yang, I. Y, "A Study on Impact Response Damage Behavior of CF/Epoxy Composite Laminates", Transactions of the KSME, Vol. 26, No. 5, pp. 835-842, 2002 https://doi.org/10.3795/KSME-A.2002.26.5.835
  6. Nam, H. W., Jung, S. W. and Han, K. S., "Stacking Sequence Effects on Indentation Damage Behaviors of Fiber Metal Lamiante", Transactions of the KSME, Vol. 26, No. 5, pp. 960-968, 2002 https://doi.org/10.3795/KSME-A.2002.26.5.960
  7. Cantwell, W. J. and Villanueva, G. Reyes, "The high velocity impact response of composite and FML-reinforced sandwich structures", Composites Science and Technology 63, pp. 1-20, 2003 https://doi.org/10.1016/S0266-3538(02)00090-8
  8. Krishnamurthy, K. S., Mahjn, P. and Mittal, R. K., "Impact Response and Damage in Laminated Composite Cylinderical Shells," Composite Structures, Vol. 59, pp. 15-36, 2003 https://doi.org/10.1016/S0263-8223(02)00238-6
  9. Wardle, B. L. and Lagace, P. A., "Behavior of Composite Shells under Transverse Impact and Quasi-Static Loading," AIAA Journal, Vol. 36, No. 6, pp. 1065-1073, 1998 https://doi.org/10.2514/2.481
  10. Wardle, B. L. and Lagace, P. A. "Importance of Instability in Impact Response and Damage Resistance of Composite Shells," AIAA Journal, Vol. 35, No. 2, pp. 389-396, 1997 https://doi.org/10.2514/2.106
  11. Cho, Y. J., Kim, Y. N. and Yang, I. Y., "Energy Absorption Chacracteristics of CFRP Laminated Shell Accoridng to High Speed Penetration", KSPE Proceeding, pp. 912-915, 2004
  12. Kim, Y. N., Kim, J. H. and Yang, I. Y., "Influence of Stacking Conditions on the Absorbed Energy Charcteristics of Composite Tubes", Vol. 18, No. 11, pp. 34-41, 2001
  13. Im, K. H., Park, N. S., Kim, Y. N. and Yang, I. Y., "A Study on Impact Characteristics of the Stacking Sequences in CFRP Composites Subjected to Falling-Weight Impact Loading," International Journal of Automotive Technology, Vol. 4, No. 4, pp. 203-211, 2003