DOI QR코드

DOI QR Code

LC Orientation Characteristics Treated on Organic Hybrid Overcoat Layer with Ion Beam Irradiation

  • Lee, Sang-Keuk (Department of Electrical and Electronic Engineering, Yonsei University) ;
  • Kim, Byoung-Yong (Department of Electrical and Electronic Engineering, Yonsei University) ;
  • Kim, Young-Hwan (Department of Electrical and Electronic Engineering, Yonsei University) ;
  • Lee, Kang-Min (Department of Electrical and Electronic Engineering, Yonsei University) ;
  • Oh, Byeong-Yun (Department of Electrical and Electronic Engineering, Yonsei University) ;
  • Han, Jeong-Min (Department of Electrical and Electronic Engineering, Yonsei University) ;
  • Seo, Dae-Shik (Department of Electrical and Electronic Engineering, Yonsei University)
  • 발행 : 2008.10.31

초록

We have studied the liquid crystal (LC) orientation behavior on the organic hybrid overcoat layer with ion beam irradiation. Excellent LC alignments of the nematic liquid crystal (NLC) on the ion beam irradiated organic hybrid overcoat layers were observed in various intensities above 600 eV. Pretilt angles of the NLC on the organic hybrid overcoat layers for all ion beam energy intensities were observed from 0.2 to 0.5 degrees. Also, we used the atomic force microscopy (AFM) images for measuring the roughness of the organic hybrid overcoat layers with ion beam irradiation before and after. The surface of organic hybrid overcoat layers was leveled off by the ion beam irradiation. Finally, a good LC alignment thermal stability on the organic hybrid overcoat layer with ion beam irradiation can be achieved.

키워드

참고문헌

  1. D.-S. Seo, K. Muroi, and S. Kobayashi, 'Generation of pretilt angle in nematic liquid crystal, 5CB, media aligned polyimide films prepared by spin coating and LB techniques: effects of rubbing', Mol. Cryst. Liq. Cryst., Vol. 213, p. 223, 1992 https://doi.org/10.1080/10587259208028733
  2. B. O. Myrvold and K. Kondo, 'A population distribution model for the alignment of nematic liquid crystals', Liq. Cryst., Vol. 17, p. 437, 1994 https://doi.org/10.1080/02678299408036582
  3. R. Arafune, K. Sakamoto, S. Ushioda, S. Tanioka, and S. Murata, 'Importance of rubbing-induced inclination of polyimide backbone structure for determination of the pretilt angle of liquid crystals', Phys. Rev. E., Vol. 58, p. 5914, 1998 https://doi.org/10.1103/PhysRevE.58.5914
  4. D.-S. Seo, K. Araya, N. Yoshida, M. Nishikawa, Y. Yabe, and S. Kobayashi, 'Effect of the polymertilt angle for generation of pretilt angle in nematic liquid crystal on rubbed polyimide surfaces', Jpn. J. Appl. Phys., Vol. 34, p. L503, 1995 https://doi.org/10.1143/JJAP.34.L503
  5. H. Matsuda, D.-S. Seo, N. Yoshida, K. Fujibayashi, and S. Kobayashi, 'Estimation of the static electricity and optical retardation produced by the rubbing polyimide and polyamide films with different fabrics', Mol. Cryst. Liq. Cryst., Vol. 264, p. 23, 1995 https://doi.org/10.1080/10587259508037298
  6. D.-S. Seo, S. Kobayashi, D.-Y. Kang, and H. Yokoyama, 'Effects of rubbing and temperature dependence of polar anchoring strength of homogeneously aligned nematic liquid crystal on polyimide Langmuir-Blodgett orientation films', Jpn. J. Appl. Phys., Vol. 34, p. 3607, 1995 https://doi.org/10.1143/JJAP.34.3607
  7. J.-Y. Hwang, D.-S. Seo, and E.-J. Hahn, 'Electrooptical characteristics of photo-aligned verticalalignment cells on photo-crosslinkable copolymer surface containing cholesteryl moiety', Liq. Cryst., Vol. 29, p. 4, 2002
  8. P. Chaudharl, J. Lacey, J. Doyle, E. Galligan, S. C. Alan, A. Callegarl, G. Hougham, N. D. Lang, P. S. Andry, R. John, K. H. Yang, M. Lu, C. Cal, J. Speidell, S. Purushothaman, J. Ritsko, M. Samnt, J. Stohrt, Y. Nakagawa, Y. Katoh, Y. Saitoh, K. Saka, H. Satoh, S. Odahara, H. Nakano, J. Nskshski, and Y. Shiota, 'Atomic-beam alignment of inorganic materials for liquid-crystal displays', Nature, Vol. 411, p. 56, 2001 https://doi.org/10.1038/35075021
  9. J.-Y. Kim, B.-Y. Oh, B.-Y. Kim, Y.-H. Kim, J.-M. Han, and D.-S. Seo, 'Compositional investigation of liquid crystal alignment on tantalum oxide via ion beam irradiation', Appl. Phys. Lett., Vol. 92, p. 043505, 2008 https://doi.org/10.1063/1.2838312
  10. B.-Y. Oh, K.-M. Lee, B.-Y. Kim, Y.-H. Kim, J.-W. Han, J.-M. Han, S.-K. Lee, and D.-S. Seo, 'Surface reformation and electro-optical characteristics of liquid crystal alignment layers using ion beam irradiation', J. Appl. Phys., Vol. 104, p. 064502, 2008 https://doi.org/10.1063/1.2978364
  11. C.-H. Ok, D.-H. Kang, K.-M. Lee, J.-W. Han, B.-Y. Kim, B.-Y. Oh, Y.-H. Kim, J.-Y. Hwang, S.-K. Lee, J.-M. Han, and D.-S. Seo, 'LC aligning capabilities of a nematic liquid crystal on homeotropic polyimide surface by new ion-beam irradiation', Trans. EEM, Vol. 8, No. 6, p. 265, 2007 https://doi.org/10.4313/TEEM.2007.8.6.265
  12. S.-K. Lee, D. -S. Choi, and D. -S. Seo, 'Tilt angle generation in NLC on homeotropic polymer surface with ion beam irradiation as a function of incident angle', Trans. EEM, Vol. 9, No. 3, p. 120, 2008 https://doi.org/10.4313/TEEM.2008.9.3.120
  13. J.-M. Han, B.-Y. Kim, J.-Y. Kim, Y.-H. Kim, J.-W. Han, J.-Y. Hwang, S.-K. Lee, D.-H. Kang, C.-H. Ok, and D.-S. Seo, 'Liquid crystal aligning capabilities treated on organic overcoat thin film by ion beam irradiation method', J. of the KIEEME(in Korean), Vol. 20, No. 3, p. 245, 2007
  14. S.-K. Lee, J.-H. Kim, B.-Y. Oh, B.-Y. Kim, J.-W. Han, Y.-H. Kim, J.-M. Han, J.-Y. Hwang, C.-H. Ok, and D.-S. Seo, 'Liquid crystal alignment effects treated on SiNx thin film layers using ion beam irradiation', Jpn. J. Appl. Phys., Vol. 46, p. 7711, 2007. https://doi.org/10.1143/JJAP.46.7711
  15. C.-Y. Lee, Y.-L. Liu, K. Y. Wu, M.-Y. Chen, and J.-C. Hwang, 'Argon plasma beam scanning processes on polyimide films for liquid crystal alignment', Jpn. J. Appl. Phys., Vol. 47, p. 226, 2008 https://doi.org/10.1143/JJAP.47.226