DOI QR코드

DOI QR Code

Preparation of Hydroxyapatite Powder Derived from Tuna Bone and Its Sintering Property

참치 뼈로부터 수산화아파타이트 분말의 제조 및 소결 특성

  • Seo, Dong-Seok (Department of Advanced Materials Engineering, Chosun University) ;
  • Kim, Young-Gook (Department of Advanced Materials Engineering, Chosun University) ;
  • Hwang, Kyu-Hong (School of Nano and Advanced Materials Engineering, Gyeongsang National University) ;
  • Lee, Jong-Kook (Department of Advanced Materials Engineering, Chosun University)
  • 서동석 (조선대학교 신소재공학과) ;
  • 김용국 (조선대학교 신소재공학과) ;
  • 황규홍 (경상대학교 나노.신소재공학부) ;
  • 이종국 (조선대학교 신소재공학과)
  • Published : 2008.10.31

Abstract

Hydroxyapatite(HA) was prepared from waste tuna bone, and its sintering property and dissolution behavior were investigated. Tuna bone derived-HA powder consisted of mainly HA and small amount of MgO. Porous HA ceramics with sintered density of 79% was obtained by pressureless sintering at $1200^{\circ}C$. Meanwhile, HA ceramics prepared by hot pressing at $1000^{\circ}C$ showed dense microstructure with sintered density of 95%. Immersion test revealed that both porous and dense HA ceramics were stable in liquid environment without distinct evidence of surface dissolution. It may be assumed that the presence of Mg in tuna bone-derived HA may improve dissolution resistance of HA.

Keywords

References

  1. L. L. Hench and J. Wilson, "An Introduction to Bioceramics," pp. 139-180, World Scientific, Singapore, 1993
  2. W. Suchanek and M. Yoshimura, "Processing and Properties of Hydryoxyapatite-based Biomaterials for Use as Hard Tissue Replacement Implants," J. Mater. Res., 13 [1] 94-117 (1998) https://doi.org/10.1557/JMR.1998.0015
  3. G. Daculsi, R. Z. LeGeros, and D. Mitre, "Crystal Dissolution of Biological and Ceramic Apatites," Calcif. Tissue Int., 45 95-103 (1989) https://doi.org/10.1007/BF02561408
  4. T. Nonami and F. Wakai, "Evaluation of Crack Propagation in Hydroxyapatite by Double-torsion Method in Air, Water and Toluene," J. Ceram. Soc. Jpn., 103 648-52 (1995) https://doi.org/10.2109/jcersj.103.648
  5. J. T. Edwards, J. B. Brunski, and H. W. Higuchi, "Mechanical and Morphologic Investigation of the Tensile Strength of a Bone-hydroxyapatite Interface," J. Biomed. Mater. Res., 36 454-68 (1997) https://doi.org/10.1002/(SICI)1097-4636(19970915)36:4<454::AID-JBM3>3.0.CO;2-D
  6. J. E. Davies and N. Baldan, "Scanning Electron Microscopy of the Bone-bioactive Implant Surface," J. Biomed. Mater. Res., 36 429-40 (1997) https://doi.org/10.1002/(SICI)1097-4636(19970915)36:4<429::AID-JBM1>3.0.CO;2-G
  7. H. K. Koerten and J. van der Meulen, "Degradation of Calcium Phosphate Ceramics," J. Biomed. Mater. Res., 44 78- 86 (1999) https://doi.org/10.1002/(SICI)1097-4636(199901)44:1<78::AID-JBM9>3.0.CO;2-6
  8. H. Wang H, J. K. Lee, A. M. Moursi, D. Anderson, P. Winnard, H. Powell, and J. J. Lannutti, "Microstructural Disassembly of Calcium Phosphates," J. Biomed. Mater. Res., 68 61-70 (2004)
  9. D. S. Seo and J. K. Lee, "Microstructural Disintegration in Dense Hydroxyapatite and Hydroxyapatite-coated Metal Implants," Metals and Materials Intl., 13 [4] 311-16 (2007) https://doi.org/10.1007/BF03027887
  10. W. L. Suchanek, K. Byrappa, P. Shuk, R. E. Riman, V. F. Janas, and K. S. TenHuisen, "Preparation of Magnesiumsubstituted Hydroxyapatite Powders by the Mechanochemical- hydrothermal Method," Biomaterials 25 4647-57 (2004) https://doi.org/10.1016/j.biomaterials.2003.12.008

Cited by

  1. The Tuna Fishing Industry: A New Outlook on Fish Protein Hydrolysates vol.10, pp.4, 2011, https://doi.org/10.1111/j.1541-4337.2011.00155.x
  2. In-situ Preparation of Eco-friendly Hydrpxyapatite/Waterborne Polyurethane Composites vol.21, pp.4, 2012, https://doi.org/10.5322/JES.2012.21.4.507
  3. Anti-inflammatory activity of ethanolic extract from skipjack tuna (Katsuwonus pelamis) heart in LPS-induced RAW 264.7 cells and mouse ear edema model vol.25, pp.3, 2016, https://doi.org/10.1007/s10068-016-0140-5