참고문헌
- K. Joon, Fuel cells - a 21st century power system, J. Power Sources 71, 12-18 (1998) https://doi.org/10.1016/S0378-7753(97)02765-1
- K. Sopian and W. R. Wan Daud, Challenges and future developments in proton exchange membrane fuel cell, Renew. Energy 31, 719-727 (2006) https://doi.org/10.1016/j.renene.2005.09.003
- M. A. J. Cropper, S. Geiger and D.M. Jollie, Fuel cells: a survey of current developments, J. Power Sources 131, 57-61 (2004) https://doi.org/10.1016/j.jpowsour.2003.11.080
- P. Zegers, Fuel cell commercialization: the key to a hydrogen economy, J. Power Sources 154, 497-502 (2006) https://doi.org/10.1016/j.jpowsour.2005.10.051
- D. Rastler, Opportunities and challenges for fuel cells in the evolving energy enterprise, Fuel Cells Bull. 3, 7-11 (2000)
- H.-C. Kuan, C.-C. M. Ma, K. H. Chen and S.-M. Chen, Preparation, electrical, mechanical and thermal properties of composite bipolar plate for a fuel cell, J. Power Sources 134, 7-17 (2004) https://doi.org/10.1016/j.jpowsour.2004.02.024
- A. Hermann, T. Chaudhuri and P. Spagnol, Bipolar plates for PEM fuel cells: a review, Intl. J. Hydrog. Energy 30, 1297-1302 (2005) https://doi.org/10.1016/j.ijhydene.2005.04.016
- E. Middelman,W. Kout and B. Vogelaar, Bipolar plates for PEM fuel cells, J. Power Sources 118, 44-46 (2003) https://doi.org/10.1016/S0378-7753(03)00070-3
- V. Mehta and J. S. Cooper, Review and analysis of PEM fuel cell design and manufacturing, J. Power Sources 114, 32-53 (2003) https://doi.org/10.1016/S0378-7753(02)00542-6
- R. Blunk, F. Zhong and J. Owens, Automotive composite fuel cell bipolar plate: hydrogen permeation concerns, J. Power Sources 159, 533-542 (2006) https://doi.org/10.1016/j.jpowsour.2005.09.068
- S.-J. Lee, C.-H. Huang and Y.-P. Chen, Investigation of PVD coating on corrosion resistance of metallic bipolar plates in PEM fuel cell, J. Mater. Process. Technol. 140, 688-693 (2003) https://doi.org/10.1016/S0924-0136(03)00743-X
- E. A. Cho, U.-S. Jeon, H. Y. Ha, S.-A. Hong and I.-H. Oh, Characteristics of composite bipolar plates for polymer electrolyte membrane fuel cells, J. Power Sources 125, 178-182 (2004) https://doi.org/10.1016/j.jpowsour.2003.08.039
- A. Kumar and R. G. Reddy, Materials and design development for bipolar end plates in fuel cells, J. Power Sources 129, 62-67 (2004) https://doi.org/10.1016/j.jpowsour.2003.11.011
- S. I. Heo, J. C. Yun, Y. C. Yang and K. S. Han, Fabrication process and characterization of conductive composite for PEFC bipolar plates, in: Proc. 4th ACCM, WP. Sydney, Australia, pp. 870-875 (2004)
- H. Wolf and M. Willert-Porada, Electrically conductive LCP-carbon composite with low carbon content for bipolar plate application in polymer electrolyte membrane fuel cell, J. Power Sources 153, 41-46 (2006) https://doi.org/10.1016/j.jpowsour.2005.03.182
- S. H. Kim and H. T. Hahn, Size effect in particulate metal matrix composites: an analytical approach, Adv. Compos. Mater. 15, 175-191 (2006) https://doi.org/10.1163/156855106777873888
- M.Wissler, Graphite and carbon powders for electrochemical applications, J. Power Sources 156, 142-150 (2006) https://doi.org/10.1016/j.jpowsour.2006.02.064
- S. I. Heo, J. C. Yun, K. S. Oh and K. S. Han, Influence of particle size and shape on mechanical and electrical properties of graphite reinforced conductive polymer composites for the bipolar plate of PEM fuel cells, Adv. Compos. Mater. 15, 115-126 (2006) https://doi.org/10.1163/156855106776829356
- E. A. Cho, U.-S. Jeon, H. Y. Ha, S.-A. Hong and I.-H. Oh, Characteristics of composite bipolar plates for polymer electrolyte membrane fuel cells, J. Power Sources 125, 178-182 (2004) https://doi.org/10.1016/j.jpowsour.2003.08.039
- H. Tsuchiya and O. Kobayashi, Mass production cost of PEM fuel cell by learning curve, Intl. J. Hydrog. Energy 29, 985-990 (2004) https://doi.org/10.1016/j.ijhydene.2003.10.011
- X. Yan, M. Hou, H. Zhang, F. Jing, P. Ming and B. Yi, Performance of PEMFC stack using expanded graphite bipolar plates, J. Power Sources 160, 1320-1328 (2006) https://doi.org/10.1016/j.jpowsour.2006.02.029
- A. Heinzel, F. Mahlendorf, O. Niemzig and C. Kreuz, Injection moulded low cost bipolar plates for PEM fuel cells, J. Power Sources 131, 35-40 (2004) https://doi.org/10.1016/j.jpowsour.2004.01.014
- A. Muller, P. Kauranen, A. von Ganski and B. Hell, Injection moulding of graphite composite bipolar plates, J. Power Sources 154, 467-471 (2006) https://doi.org/10.1016/j.jpowsour.2005.10.096
- B. D. Cunningham, J. Huang and D. G. Baird, Development of fuel cell bipolar plates from graphite filled wet-lay thermoplastic composite materials, J. Power Sources 150, 110-119 (2005) https://doi.org/10.1016/j.jpowsour.2005.02.074
- B. D. Cunningham, J. Huang and D. G. Baird, Development of bipolar plates for fuel cells from graphite filled wet-lay material and a thermoplastic laminate skin layer, J. Power Sources 165, 764-773 (2007) https://doi.org/10.1016/j.jpowsour.2006.12.035
- S. I. Heo, K. S. Oh, J. C. Yun, S. H. Jung, Y. C. Yang and K. S. Han, Development of preform molding technique using expanded graphite for PEM fuel cell bipolar plates, J. Power Sources 171, 396-403 (2007) https://doi.org/10.1016/j.jpowsour.2007.05.110
- A. Kelly and C. Zweben, Comprehensive Composite Materials. Polymer Matrix Composites, vol. 2. Pergamon, UK (2000)
- A. Celzard, J. F. Mareche and G. Furdin, Modelling of exfoliated graphite, Prog. Mater. Sci. 50, 93-179 (2005) https://doi.org/10.1016/j.pmatsci.2004.01.001
- A. Celzard, J. F. Mareche and G. Furdin, Surface area of compressed expanded graphite, Carbon 40, 2713-2718 (2002) https://doi.org/10.1016/S0008-6223(02)00183-5
- A. L. Dicks, The role of carbon in fuel cells: review, J. Power Sources 156, 128-141 (2006) https://doi.org/10.1016/j.jpowsour.2006.02.054
- S. I. Heo, K. S. Oh, J. C. Yoon and K. S. Han, Electrical and mechanical properties of graphite particle/carbon fiber hybrid conductive polymer composites, J. Korea Soc. Compos. Mater. 19, 7-12 (2006)