DOI QR코드

DOI QR Code

A Novel Manufacturing Method for Carbon Nanotube/Aramid Fiber Filled Hybrid Multi-component Composites

  • Song, Young-Seok (Department of Mechanical Engineering, MIT) ;
  • Oh, Hwa-Jin (School of Materials Science and Engineering, Seoul National University) ;
  • Jeong, Tai-Kyeong T. (Department of Communications Eng., Myongji University) ;
  • Youn, Jae-Ryoun (School of Materials Science and Engineering, Seoul National University)
  • 발행 : 2008.12.01

초록

A novel manufacturing method for hybrid composites filled with carbon nanotubes (CNTs) and aramid fibers is proposed. To disperse the CNTs in the epoxy matrix with the presence of aramid fibers, CNT/polyethyleneoxide (PEO) composites are prepared and utilized because PEO is miscible in the epoxy resin. After thin films are made of the CNT/PEO composite and placed together with the aramid fibers, the epoxy resin is infused to them. The PEO is dissolved in the epoxy and then the CNTs are dispersed in the PEO/epoxy matrix between aramid fibers before the pre-heated matrix is cured. It is found that the PEO is completely miscible with the epoxy resin and CNTs are dispersed well in the space between the aramid fibers.

키워드

참고문헌

  1. D. G. Seong, K. Chung, T. J. Kang and J. R. Youn, A study on resin flow through a multi-layered preform in resin transfer molding, Polym. Polym. Compos. 10, 493-509 (2002).
  2. W. Lee, J. H. Kim, H. Shin, K. Chung, T. J. Kang and J. R. Youn, Constitutive equations based on cell modelling method for 3D circular braided fiber-reinforced composites, Fiber Polym. 4, 77-83 (2003). https://doi.org/10.1007/BF02875441
  3. Y. S. Song, K. Chung, T. J. Kang and J. R. Youn, Prediction of permeability tensor for plain woven fabric by using control volume finite element method, Polym. Polym. Compos. 11, 465- 476 (2003).
  4. Y. J. Cho, Y. S. Song, T. J. Kang, K. Chung and J. R. Youn, Permeability measurement of a circular braided preform for resin transfer molding, Fiber Polym. 4, 135-144 (2003). https://doi.org/10.1007/BF02875461
  5. Y. S. Song, K. Chung, T. J. Kang and J. R. Youn, Numerical prediction of permeability tensor for three-dimensional circular braided preform by considering intra-tow flows, Polym. Polym. Compos. 13, 323-334 (2005).
  6. Y. S. Song and J. R. Youn, Asymptotic expansion homogenization of permeability tensor for plain woven fabrics, Composites, Part A 37, 2080-2087 (2006). https://doi.org/10.1016/j.compositesa.2005.12.002
  7. K. S. Shin, Y. S. Song and J. R. Youn, Radial flow advancement in multi-layered preform for resin transfer molding, Korea-Australia Rheol. J. 18, 217-224 (2006).
  8. H. S. Chae, Y. S. Song and J. R. Youn, Transverse permeability measurement of a circular braided preform in liquid composite molding, Korea-Australia Rheol. J. 19, 17-25 (2007).
  9. Y. S. Song and J. R. Youn, Flow advancement through multi-layered preform with sandwich structure, Composites, Part A 38, 1082-1088 (2007). https://doi.org/10.1016/j.compositesa.2006.04.009
  10. Y. S. Song, K. Chung, T. J. Kang and J. R. Youn, Prediction of permeability tensor for three dimensional circular braided preform by applying a finite volume method to a unit cell, Compos. Sci. Technol. 64, 1629-1636 (2004). https://doi.org/10.1016/j.compscitech.2003.11.008
  11. R. E. Shalin, Polymer Matrix Composites. Chapman and Hall, London, UK (1995).
  12. A. Haque, M. Shamsuzzoha, F. Hussain and D. Dean, S2-glass/epoxy polymer nanocomposites: manufacturing, structures, thermal and mechanical properties, J. Compos. Mater. 37, 1821-1837 (2003). https://doi.org/10.1177/002199803035186
  13. D. P. N. Vlasveld, P. P. Parlevliet, H. E. N. Bersee and S. J. Picken, Fiber-matrix adhesion in glass-fibre reinforced polyamide-6 silicate nanocomposites, Composites, Part A 36, 1-11 (2005).
  14. J. K. W. Sandler, J. E. Kirk, I. A. Kinloch, M. S. P. Shaffer and A. H. Windle, Ultra-low electrical percolation threshold in carbon-nanotube-epoxy composites, Polymer 44, 5893-5899 (2003). https://doi.org/10.1016/S0032-3861(03)00539-1
  15. Y. S. Song and J. R. Youn, Influence of dispersion states of carbon nanotubes on physical properties of epoxy nanocomposites, Carbon 43, 1378-1385 (2005). https://doi.org/10.1016/j.carbon.2005.01.007
  16. A. Allaoui, S. Bai, H. M. Cheng and J. B. Bai, Mechanical and electrical properties of a MWNT/epoxy composites, Compos. Sci. Tech. 62, 1993-1998 (2002). https://doi.org/10.1016/S0266-3538(02)00129-X
  17. E. T. Thostenson, W. Z. Li, D. Z. Wang, Z. F. Ren and T. W. Chou, Carbon nanotube/carbon fiber hybrid multiscale composites, J. Appl. Phys. 91, 6034-6037 (2002). https://doi.org/10.1063/1.1466880
  18. Z. Fan, K. T. Hsiao and S. G. Advani, Experimental investigation of dispersion during flow of multi-walled carbon nanotube/polymer suspension in fibrous porous media, Carbon 42, 871-876 (2004). https://doi.org/10.1016/j.carbon.2004.01.067
  19. L. Meynie, F. Fenouillot and J. P. Pascault, Influence of the gel on the morphology of a thermoset polymerized into a thermoplastic matrix, under shear, Polymer 45, 5101-5109 (2004). https://doi.org/10.1016/j.polymer.2004.05.058
  20. B. Kulshreshtha, A. K. Ghosh and A. Misra, Crystallization kinetics and morphological behavior of reactively processed PBT/epoxy blends, Polymer 44, 4723-4734 (2003). https://doi.org/10.1016/S0032-3861(03)00347-1
  21. Q. Guo, C. Harrats, G. Groeninckx and M. H. J. Koch, Miscibility, crystallization kinetics and real-time small-angle X-ray scattering investigation of the semicrystalline morphology in thermosetting polymer blends of epoxy resin and poly(ethylene oxide), Polymer 42, 4127-4140 (2001). https://doi.org/10.1016/S0032-3861(00)00813-2
  22. Z. Sixun, Z. Naibin, L. Xiaolie and M. Dezhu, Epoxy resin/poly(ethylene oxide) blends cured with aromatic amine, Polymer 36, 3609-3613 (1995). https://doi.org/10.1016/0032-3861(95)92037-F
  23. J. T. Carter, G. T. Emmerson, C. L. Faro, P. T. McGrail and D. R. Moore, The development of a low temperature cure modified epoxy resin system for aerospace composites, Composites, Part A 80, 83-91 (2003).
  24. Y. S. Song and J. R. Youn, Properties of epoxy nanocomposites filled with carbon nanomaterials, e-Polymers 080, 1-11 (2004).
  25. Y. S. Song and J. R. Youn, Modeling of rheological behavior of nanocomposites by Brownian dynamics simulation, Korea-Australia Rheol. J. 16, 201-212 (2004).
  26. Y. S. Song and J. R. Youn, Modeling of effective elastic properties for polymer based carbon nanotube composites, Polymer 47, 1741-1748 (2006). https://doi.org/10.1016/j.polymer.2006.01.013
  27. Y. S. Song and J. R. Youn, Evaluation of effective thermal conductivity for carbon nanotube/ polymer composites using control volume finite element method, Carbon 44, 710-717 (2006). https://doi.org/10.1016/j.carbon.2005.09.034
  28. J. A. Kim, D. G. Seong, T. J. Kang and J. R. Youn, Effects of surface modification on rheological and mechanical properties of CNT/epoxy composites, Carbon 44, 1898-1905 (2006). https://doi.org/10.1016/j.carbon.2006.02.026
  29. S. H. Lee, E. Cho, S. H. Jeon and J. R. Youn, Rheological and electrical properties of polypropylene composites containing functionalized multi-walled nanotubes and compatibilizers, Carbon 45, 2810-2822 (2007). https://doi.org/10.1016/j.carbon.2007.08.042
  30. T. J. Horng and E. M. Woo, Effect of network segment structure on the phase homogeneity of crosslinked poly(ethylene oxide)/epoxy networks, Polymer 39, 4115-4122 (1998). https://doi.org/10.1016/S0032-3861(97)10376-7
  31. E. Schauer, L. Berglund, G. Peña, C. Marieta and I. Mondragon, Morphological variations in PMMA-modified epoxy mixtures by PEO addition, Polymer 43, 1241-1248 (2002). https://doi.org/10.1016/S0032-3861(01)00683-8
  32. L. Hu, H. Lü and S. Zheng, Effect of crosslinking on intermolecular interactions in thermosetting blends of epoxy resin with poly(ethylene oxide), J. Polym. Sci., Part B: Polym. Phys. 42, 2567- 2575 (2004). https://doi.org/10.1002/polb.20119
  33. Y. H. Hyun, S. T. Lim, H. J. Choi and M. S. Jhon, Rheology of poly(ethylene oxide)/organoclay nanocomposites, Macromolecules 34, 8084-8093 (2001). https://doi.org/10.1021/ma002191w