References
- D. Ardayfio and J. Opra, "Brake and Clutch Pedal System Optimization Using Design for Manufacture and Assembly," SAE 920774, 1992
- A. Szadkowski, "Clutch Lever Design Issues," SAE 2004-01-1229, pp.809-820, 2004
- B. S. Yang, "Sealing Performance of Oil Seal," J. KSTLE, Vol.3, No.1, pp.12-17, 1987
- J. U. Choi, I. K. Cheon, H. J. Kim and C. K. Kim, "Finite Element Analysis of the Sealing Mechanism for an U-Cup Seal," J. KSTLE, Vol.10, No.3, pp.12-17, 1997
- C. K. Kim and I. K. Cheon, "On The Analysis of Rubber Oil Seal in Consideration of Heat Stress," J. KSTLE, Vol.10, No.2, pp.39-42, 1994
- S. W. Han, W. D. Kim and H. J. Lee, "Numerical Analysis of Water Seal Characteristics," Annual Research Report, KIMM, Vol.24, pp.175-188, 1994
- T. Raparelli, A. M. Bertetto and L. Mazza, "Experimental and Numerical Study of Friction in an Elastomeric Seal for Pneumatic Cylinders," Triboloty International, Vol.30, No.7, pp. 547-552, 1997 https://doi.org/10.1016/S0301-679X(97)00015-7
- M.-H. Im, J.-C. Lee and B.-E. Gu, "Finite Element Analysis of Primary Cup-Seal in a Clutch Master Cylinder," Transactions of KSAE, Vol.10, No.3, pp.143-150, 2002
- B. Lee, "Friction Characteristics of an Hydraulic Cylinder for an Automotive Manual Clutch," Transactions of KSAE, Vol.14, No.4, pp.32-38, 2006
- J.-C. Lee, M.-H. Im, B. Lee, J. H. Jang, Y. S. Jung, M. D. Hur and B. K. Choi, "An Experimental Study on the Friction Coefficient of Rubber for Clutch Master Cylinder Cup-Seal," Transactions of KSAE, Vol.11, No.5, pp.112-118, 2003
- J. O. Almen and A. Laszlo, "The Uniform- Section Disk Spring," Transactions of ASME, Vol.58, pp.305-315, 1936
- G. Curti and R. Montanini, "On the Influence of Friction in the Calculation of Conical Disk Springs," Journal of Mechanical Design, Vol.121, pp.622-627, 1999 https://doi.org/10.1115/1.2829508
- B. Lee, "Load Characteristics and Sensitivity Analysis for an Automotive Clutch Diaphragm Spring," Transactions of KSAE, Vol.14, No.1, pp.54-59, 2006
- T. Hasebe, H. Yamamoto, K. Morita, K. Hibi, T. Ninomiya and Y. Goto, "Experimental Study of Reduction Methods for Clutch Pedal Vibration and Drive Train Rattling Noise From Clutch System," SAE 932007, 1993
- K. Imai, M. Yamada, T. Ninomiya and T. Nimura, "Pressure Pulsation Transfer in Clutch Hydraulic Systems," SAE 891307, 1989
- F. Fraysse and L. Cheze, "An Exploratory Investigation of the Discomfort of Clutch Pedal Operation Using a Musculoskeletal Biomechanical Model," J. of Biomechanics, Vol.39, 2006
- X. Wang, B. Breton-Gadegbeku and L. Bouzon, "Biomechanical Evaluation of the Comfort of Automobile Clutch Pedal Operation," Int. J. of Industrial Ergonomics, Vol.34, pp.209-221, 2004 https://doi.org/10.1016/j.ergon.2004.04.007
- D. A. Jr. Haessig, "On the Modeling and Simulation of Friction," Transaction of the ASME, Vol.113, pp.354-362, 1991