Journal of Korean Society of Industrial and Systems Engineering (산업경영시스템학회지)

Society of Korea Industrial and System Engineering (한국산업경영시스템학회)
권호 표지

Quality Improvement of Machined Surface in MQL Machining

MQL 가공에서 기계가공면의 표면 품위 향상

  • Jung, Jong-Yun (Department of Industrial & Systems Engineering, Changwon National University) ;
  • Cho, Hyung-Chan (Department of Industrial & Systems Engineering, Changwon National University) ;
  • Lee, Choon-Man (Division of Mechatronics, Changwon National University)
  • 정종윤 (창원대학교 산업시스템공학과) ;
  • 조형찬 (창원대학교 산업시스템공학과) ;
  • 이춘만 (창원대학교 메카트로닉스공학부)
  • Published : 2007.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Machining processes produce high accurate metallic parts in metal working industries. Lubrication for machining enhances quality of machined surface and it prolongs the life of cutting tools. Since lubricant is poisonous to human body and environment, it causes occupational diseases for workers and air pollution in environment. Because of these problems generated, developed countries do not permit the excessive usage of lubricant in machining shops. This research focuses on the development of MQL machining technique that consumes minimal amount of lubricant, which reduces possible outbreak of occupational diseases and air pollution. This research sets experimental equipments for MQL machining. Experiments for this study are designed with major machining parameters in MQL. Through the analysis of experiments, this paper presents the optimal machining parameters.

Keywords

References

  1. 고태조, 오명석, 박성호, 김희술; '선상에서 절삭유 미립화 생성 메카니즘의 실험적검증', 한국정밀공학회지, 19(12) : 2002
  2. 박성현; 현대 실험계획법, 민영사, 2002
  3. 서남섭; 절삭 가공학, 동명사, 2002
  4. 이득우; '압축 냉각공기를 이용한 고속 볼엔드밀링의 가공 특성 평가', 2003공작기계 및 가공기술세미나, 창원대학교 공작기계기술연구센터, 2004
  5. 조형찬, 정종윤, 이춘만; 'MQL절삭 가공을 이용한 표면거칠기 향상에 관한연구', 한국산업경영시스템 학회, 추계학술대회 논문집, 2004
  6. 황 준, 정의식, 황덕철; '환경 친화적 기계가공 기술에 관한 연구', 한국정밀공학회지, 20(2) : 2003
  7. Degarmo, E. P., Black, J. T., and Kohser, R. A.; Materials and Processes in Manufacturing, 9th Edition, Wiley, 2002
  8. Dhar, N. R., Kamruzzaman, M., and Mahiuddin A., 'Effect of Minimum Quantity Lubrication (MQL) on Tool Wear and Surface Roughness in Turning AISI-4340 Steel,' Journal of Materials Processing Technology, 172(2) : 299-304, Feb., 2005
  9. Hou, X. Jung, J. Y., Moon, D. H., and Lee, C. M., 'Turning Aluminum with MQL Machining,' 한국산업경영시스템학회, 추계학술대회 논문집, 2006
  10. Internet Web site, 미국 Occupational Safety and Health A dministration[http://www .osha.gov /]
  11. Internet Web site, 일본공업규격[http://www.jisc.go. jp/]
  12. Klocke, F. and Eisenblatter, G., 'Dry Cutting,' Keynote Paper, Annals of CIRP, 46(2), 1997
  13. Rahman, M., Senthil Kumar, A., and Salam, M. D., 'Experimental Evaluation on the Effect of Minimal Quantities of Lubricant in Milling,' International Journal of Machine Tools & Manufacture, 42(5) : 539-547, April, 2002 https://doi.org/10.1016/S0890-6955(01)00160-2