Reactive Ion Etching of a-Si for high yield and low process cost

  • Hur, Chang-Wu (Mokwon University, Department of Electronics Engineering)
  • Published : 2007.09.30

Abstract

In this paper, amorphous semiconductor and insulator thin film are etched using reactive ion etcher. At that time, we experiment in various RIE conditions (chamber pressure, gas flow rate, rf power, temperature) that have effects on quality of thin film. The using gases are $CF_4,\;CF_4+O_2,\;CCl_2F_2,\;CHF_3$ gases. The etching of a-Si:H thin film use $CF_4,\;CF_4+O_2$ gases and the etching of $a-SiO_2,\;a-SiN_x$ thin film use $CCl_2F_2,\;CHF_3$ gases. The $CCl_2F_2$ gas is particularly excellent because the selectivity of between a-Si:H thin film and $a-SiN_x$ thin film is 6:1. We made precise condition on dry etching with uniformity of 5%. If this dry etching condition is used, that process can acquire high yield and can cut down process cost.

Keywords

References

  1. Chang W. Hur, 'Method of Making Thin Film Transistors', United States Patent, Patent No.5,306,653, Apr. 1994
  2. B. Park, Process integration of a-Si:H Schottky diode and thin film transistor for low energy x-ray imaging applications, Mat. Res. Soc. Symp. A, April 13-17, 1998
  3. K. Aflatooni, a-Si:H Schottky diode direct detection pixel for large area x-ray imaging, IEEE IEDM, December 7-10, Washington, D.C., 1997
  4. B.W.Park, J.L.Choi, and C.W.Hur, 'Micro-crystal silicon in image sensor,' MIRS, vol.283, p.609, 1992
  5. K. Aflatooni, R. Hornsey, A. Nathan, 'Reverse current instabilities in amorphous silicon Schottky diodes: modeling and experiments,' IEEE Trans. Electron Devices, vol.46, pp.1417-1422, 1999 https://doi.org/10.1109/16.772485
  6. Q. Ma, 'ITO/a-Si:H Schottky photodiode with low leakage current and high stability ,'Mat. Res. Soc. Symposium B, Sanfrancisco, April, 5-9, 1999