Journal of the Society of Naval Architects of Korea (대한조선학회논문집)

The Society of Naval Architects of Korea (대한조선학회)
권호 표지
DOI QR코드

DOI QR Code

A Simplified Method to Predict the Weld-induced Deformation of Curved Plates

곡판의 용접변형 예측을 위한 간이 해석법

  • Lee, Joo-Sung (School of Naval Architecture & Ocean Engineering, Univ. of Ulsan) ;
  • Hoi, Nguyen Tan (School of Naval Architecture & Ocean Engineering, Univ. of Ulsan)
  • 이주성 (울산대학교 조선해양공학부) ;
  • Published : 2007.10.20
Download PDF
⟨ Previous Next ⟩

Abstract

A three-dimensional finite element model has been used to simulate the bead on plate welding of curved steel plates having curvature in the welding direction. By using traditional method such as thermal-elastic-plastic(TEP) finite element analysis. the weld-induced deformation can be accurately predicted. However, three-dimensional finite element analysis is not practical in analyzing the weld-induced deformation of large and complex structures such as ship structures in view of computing time and cost. In this study, used is the equivalent loading method based on inherent strain to illustrate the effect of the longitudinal curvature upon the weld-induced deformation of curved plates.

Keywords

References

  1. Jang, C.D., Ha, Y.S., Ko, D.E. and Moon, S.C., 2002, 'Determination of Inherent Strain Regions to Estimate Plate Deformation by Line Heating,' Journal of the Society of Naval Architects of Korea, Vol. 39, No. 1, pp. 82-89 https://doi.org/10.3744/SNAK.2002.39.1.082
  2. Jane, C.D. and Lee, C.H., 2000, 'A Study on the Prediction and Control of Welding Deformation of Ship Hull Blocks,' Journal of the Society of Naval Architects of Korea, Vol. 37, No. 2, pp. 127-136
  3. Kim, S.I., 2004, 'Development of Simple Prediction Model for V-groove Butt Welding deformation,' Journal of the Society of Naval Architects of Korea, Vol. 41, No. 2, pp. 106-113 https://doi.org/10.3744/SNAK.2004.41.2.106
  4. Lee, J.S., 2004, 'Simulator for Weld-Induced Deformation of Panel Blocks,' Journal of the Society of Naval Architects of Korea, Vol. 41, No. 1, pp. 55-63 https://doi.org/10.3744/SNAK.2004.41.5.055
  5. Li, Y., Wang, J., Chen, M. and Shen, X., 2004, 'Finite Element Analysis of Residual Stress in the Welded Zone of High Strength Steel,' Bull. Mater. Sci., Vol. 27, No. 2, pp, 127-132, Indian Academy of Science https://doi.org/10.1007/BF02708494
  6. Lienhard(IV), J.H. and Lienhard(V), J.H., 2004, A Heat Transfer Textbook, Phlogiston Press, Cambridge, Massachusetts
  7. Mollicone, P., Camilleri, D., Gray, T.G.F. and Comlekci, T., 2006, 'Simple Thermo-Elastic-plastic Models for Welding Distortion Simulation,' Journal of Materials Processing, Vol. 176, Issues 1-3, pp. 77-86 https://doi.org/10.1016/j.jmatprotec.2006.02.022
  8. Michaleris, P. and DeBiccari, A., 1997, 'Prediction of Welding Distortion,' Welding Journal, Vol. 76, No. 4, pp. 172s-180s
  9. Takeda, Y., 2002, 'Prediction of Butt Welding Deformation of Curved Shell Plates by Inherent Strain Method,' Journal of Ship Production, Vol. 18, No. 2, pp. 99-104
  10. Luo, Y., lshayama, M. and Murakawa, H., 1999, 'Welding of Plates with Longitudinal Curvature,' Trans. JWRI, Vol. 28, No. 2
  11. Wu, A., Syngellakis, S. and Mellor, B.G., 2000, 'Finite Element Analysis of Residual Stresses in a Butt Weld,' University of Southampton, UK