한국분말재료학회지 (Journal of Powder Materials)

  • 제14권5호
  • /
  • Pages.298-302
  • /
  • 2007
  • /
  • 2799-8525(pISSN)
  • /
  • 2799-8681(eISSN)
한국분말재료학회 (*구 분말야금학회) (The Korean Powder Metallurgy & Materials Institute)
권호 표지
DOI QR코드

DOI QR Code

온간성형법으로 제조된 Fe 분말 코어의 자성특성

Magnetic Properties of Fe Powder Core Fabricated by Warm Compaction

  • 김세훈 (한양대학교 신소재공학과) ;
  • 조태선 (한양대학교 신소재공학과) ;
  • 박민서 (한양대학교 신소재공학과) ;
  • 김영도 (한양대학교 신소재공학과)
  • Kim, Se-Hoon (Division of Materials Science and Engineering, Hanyang University) ;
  • Jo, Tae-Sun (Division of Materials Science and Engineering, Hanyang University) ;
  • Park, Min-Suh (Division of Materials Science and Engineering, Hanyang University) ;
  • Kim, Young-Do (Division of Materials Science and Engineering, Hanyang University)
  • 발행 : 2007.10.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In recent years, a rapid increase in demands for the soft magnetic composite parts has been created and it has been tried to improve their properties by various processing methods, alloying elements and compaction parameters. Warm compaction method has been used for the reduction of residual stress, the improvement of magnetic properties and the higher densities. In this work, the effects of warm compaction and polymer binder on magnetic properties of Fe powder core were investigated. The sintering powder, Fe oxide, was ball-milled for 30n hours. And then ball-milled Fe oxide powder was reduced through hydrogen reduction process. The hydrogen reduced Fe powder and polymer binder were mixed by 3-D turbular mixer. And then the mixed powder was warm-compacted. The magnetic properties such as core loss and permeability were measured by B-H curve analyzer.

키워드

참고문헌

  1. R. W. Siegel and G. E. Fougere: Nanostruct. Mater., 6 (1995) 205 https://doi.org/10.1016/0965-9773(95)00044-5
  2. S. H. Kim, Y. J. Lee, J. S. Lee and Y. D. Kim: J. Korean. Powder. Metall. lnst., 14 (2007) 185 https://doi.org/10.4150/KPMI.2007.14.3.185
  3. R. Birringer: Mater. Sci. Eng. A, 117 (1989) 33 https://doi.org/10.1016/0921-5093(89)90083-X
  4. R. W. Siegel: Nanostruct. Mater., 3 (1993) 1 https://doi.org/10.1016/0965-9773(93)90058-J
  5. B. D. Cullity: Introduction to Magnetic Materials, Addison Wesley Publishing Company, Massachusetts (2006)
  6. N. Kurti: Selected Works of Louis Neel, Gordon and Break Science Publishers, New York (1988)
  7. A. Goldman: Handbook of Mordem Ferromagnetic Materials, Kluwer Academic Publishers, Massachusetts (1999)
  8. Hoeganaes, Handbook for Sintered Components, 4 ( 1998)
  9. F. Oyobi and F. Yakin: Journal of the Japan Society of Powder and Powder Metallurgy, 42 (1995) 982 https://doi.org/10.2497/jjspm.42.982