Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A Control Strategy for Systems with Single Flexible Mode to Reduce Residual Vibration

단일 유연 모드를 가지는 시스템의 잔여 진동을 최소화하기 위한 제어 전략

  • 신영주 (삼성전자 반도체총괄 메모리사업부)
  • Published : 2007.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

Many manufacturing devices must execute motions as quickly as possible to achieve profitable high-volume production. Most of them have devices having flexibility and a time delay of one sampling is added to the plants when they are controlled by fast discrete controllers, which brings about non-minimum phase zeros. This paper develops a control strategy that combines feedforward and feedback control with command shaping for such devices. First, the feedback controller is designed to increase damping and eliminate steady-state error. Next, the feedforward controller is designed to speed up the transient response. Finally, an appropriate reference profile is generated using command-shaping techniques to ensure fast point-to-point motions with minimum residual vibration. The particular focus of the paper is to understand the interactions between these individual control components. The resulting control strategy is demonstrated on a model of a high-speed semiconductor manufacturing machine.

Keywords

References

  1. Chang, P. and Park, J., 'A Concurrent Design of Input Shaping Technique and a Robust Control for High-Speed/High-Precision Control of a Chip Mounter,' Control Engineering Practice, Vol. 9, No. 12, pp. 1279-1285, 2001 https://doi.org/10.1016/S0967-0661(01)00092-2
  2. Park, H., Chang, P. and Kim, S., 'Time-Varying Input Shaping Technique Applied to Vibration Reduction of an Industrial Robot,' Proc. International Conference on Intelligent Robots and Systems, Vol. 1, pp. 285-290, 1999
  3. Meckl, P. H. and Seering, W. P., 'Reducing Residual Vibration in Systems with Uncertain Resonances,' IEEE Cont. Syst. Mag., Vol. 8, No. 2, pp. 73-76, 1988 https://doi.org/10.1109/37.1877
  4. Meckl, P. H. and Seering, W. P., 'Experimental Evaluation of Shaped Inputs to Reduce Vibration for a Cartesian Robot,' ASME Journal of Dynamic Systems, Measurement and Control, Vol. 112, No.2, pp. 159-165, 1990 https://doi.org/10.1115/1.2896122
  5. Meckl, P. H. and Kudo, K, 'Input Shaping Technique to Reduce Vibration for Disk Drive Heads,' ASME Advances in Information Storage Systems, Vol. 5, pp. 45-58, 1993
  6. Meckl, P. H. and Kinceler, R., 'Robust Motion Control of Flexible Systems Using Feedforward Forcing Functions,' IEEE Transactions on Control Systems Technology, Vol. 2, No.3, pp. 245-254, 1994 https://doi.org/10.1109/87.317981
  7. Park, U. H., Lee, J. W. and Noh, S. H., 'Reduction of Residual Vibration for Axes Overhead Crane by Input Shaping,' J. KSPE, Vol. 17, No.4, pp. 181-188, 2000
  8. Fujisaki, Y. and Ikeda, M., 'A Two-Degree-ofFreedom Design of Optimal Servosystems for General Reference Signals,' Proc., 32nd Conf. on Decision & Cont., pp. 3808-3810, 1993
  9. Mita, T., 'Optimal Digital Feedback Control Systems Counting Computation Time of Control Laws,' IEEE Trans. on Auto. Cont., Vol. AC-30, No.6, pp. 542-548, 1985
  10. Ogata, K, 'Discrete-Time Control Systems,' Prentice-Hall, pp. 717-728, 1997
  11. Park, H. and Chang, P., 'Concurrent Design of Continuous Zero Phase Error Tracking Controller and Sinusoidal Trajectory for Improved Tracking Control,' ASME J. Dyn. Syst. Meas. Control, Vol. 123, No.1, pp. 127-129, 2001 https://doi.org/10.1115/1.1343464
  12. Tomizuka, M., 'Zero Phase Error Tracking Algorithm for Digital Control,' ASME J. Dyn. Syst. Meas. Control, Vol. 109, No.1, pp. 65-68, 1987 https://doi.org/10.1115/1.3143822