소성∙가공 (Transactions of Materials Processing)

  • 제16권6호
  • /
  • Pages.452-456
  • /
  • 2007
  • /
  • 1225-696X(pISSN)
  • /
  • 2287-6359(eISSN)
한국소성∙가공학회 (The Korean Society for Technology of Plasticity and materials processing)
권호 표지
DOI QR코드

DOI QR Code

분할된 노치형상을 고려한 냉간단조 금형 설계에 관한 연구

A Study on the Design of Cold Forging Die with Parted Notch

  • 발행 : 2007.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Cold forging technology of a gear product is being interested in the dimensional accuracy, high stiffness and reduction of stress concentration. Especially it is needed to avoid the damage due to extremely high local pressure. Therefore it is important to reduce the high pressure in die design of cold forging. In this study, single die insert type and splitted die insert type are considered to recognize the notch effects in the die of sprocket forming. The stress concentration has been released at the notch area by the cushion effect in the splitted die insert.

키워드

참고문헌

  1. F, Dohmann and O. Traudt, Metal Flow and Tool Stress in Cold Forging of Gear Components, Advanced Technology of Plasticity, Vol. II, pp. 1081-1089
  2. S. Fujikawa, H. Yoshioka and S. Shimamura, 1992, Cold-and Warm-Forging Applications in the Automative Industry, Journal of Materials Processing Technology, 35, pp. 317-342 https://doi.org/10.1016/0924-0136(92)90325-M
  3. I. Moriguchi, 1992, Cold Forging of Gear and Other Complex Shapes, Journal of Materials Processing Technology, 35, pp. 439-450 https://doi.org/10.1016/0924-0136(92)90333-N
  4. 허관도, 최영, 여홍태, 2001, 정밀 냉간단조 금형설계를 위한 보강링의 영향, 한국정밀공학회지, 제18권, 제12호, pp. 145-151
  5. 여홍태, 송요선, 최영, 허관도, 2002, 스트레인게이지를 이용한 후방압출금형의 변형 측정에 관한 연구, 한국정밀공학회지, pp. 713-716
  6. K. Lange, 1985, Handbook of Metal Forming, McGraw-Hill, Inc, pp. 15.07-15.10
  7. 강경주, 박훈재, 윤주철, 김정, 강범수, 2004, 정밀정형 냉간단조 기어성형을 위한 소재처리와 다이설계, 한국소성가공학회 2004 춘계학술대회 논문집, pp. 87-90
  8. C. C. Chen and S. Kobayashi, 1987, Rigid-Plastic Finite Element Analysis of Ring Compression, Application of Numerical Methods to Forming Process. ASME. AMD. Vol. 28, pp. 163-174
  9. S. Kobayashi, S. I. Oh and T. Altan, 1989, Metal Forming and the Finite-Element Method, Oxford University Press: Oxford, New York
  10. DEFORM-3D Users's Manual, Version 5.0
  11. ANSYS Users's Manual, Revision 5.5

피인용 문헌

  1. Development of High Precision R/F Switch Connector Shell for Mobile Phone by Embossing and Burring Process vol.22, pp.6, 2013, https://doi.org/10.5228/KSTP.2013.22.6.317