Abstract
Use of various lighting simulation software has been increased Lighting simulation software can be categorized into two types. One is for optical design while the other is for estimation and analysis of lighting design. Photopia 2.0 is typical software for optical design of a luminare and Lumen-micro 2000, Relux 2006, Lightscape 3.2 and AGI 32 are software for lighting design. Through using various lighting simulation software some different results can be found under the same conditions. Therefore, the purpose of this paper is to compare measured and simulated photometric data of different types of luminaires and to compare simulated values from Lumen-micro 2000, Relux 2006, Lightscape 3.2 and AGI 32 under the same conditions. In addition, the reasons for such differences are analyzed.
조명시뮬레이션 소프트웨어는 크게 조명기구의 광학설계를 위한 소프트웨어와 조명계획안의 예측 및 평가를 위한 소프트웨어로 구분할 수 있으며, 그 사용이 점차 증가하고 있다. 조명기구의 광학설계를 위한 시뮬레이션 소프트웨어로는 Photopia 2.0이 대표적이며, 조명계획안의 적합성을 판단하기 위한 시뮬레이션 소프트웨어는 Lumen-micro 2000, Relux 2006, Lightscape 3.2와 AGI 32 등이 있다. 이러한 시뮬레이션 소프트웨어는 측정값과 시뮬레이션 결과값, 그리고 소프트웨어별 시뮬레이션 결과값이 상이하게 나오는 경우가 발생한다. 따라서 본 연구는 임의의 조명기구 측정 배광데이터와 Photopia 2.0의 시뮬레이션 배광데이터를 비교하고, 공간의 규모, 배광데이터, 마감재등의 같은 조건하에 Lumen-micro 2000, Relux 2006, Lightscape 3.2와 AGI 32의 시뮬레이션 결과를 비교하여 차이점의 원인에 분석하고자 한다.