References
- Im, Y. G., Cho, B. H., Chung, S. I. and Jeong, H. D., 'Development of Build-up Printed Circuit Board Manufacturing Process Using Rapid Prototyping Technology and Screen Printing Technology,' International Journal of Precision Engineering and Manufacturing, Vol. 4, No. 4, pp. 51-56, 2003
- Hur, S. M. and Lee, S. H., 'Study on the Reconstruction of Skull Prototype Using CT Image and Laser Scanner,' International Journal of Precision Engineering and Manufacturing, Vol. 1, No. 1, pp. 146-151, 2000
- Kim, H. C., Choi, H. T., Lee, H. K. and Lee, S. H., 'A Study on Rapid Prototyping Using VRML Model,' International Journal of Precision Engineering and Manufacturing, Vol. 3, No. 2, pp. 5-14, 2002
- Ahn, D. K. and Lee, S. H., 'Improving the Surface Roughness of SL Parts Using a Coating and Grinding Process,' International Journal of Precision Engineering and Manufacturing, Vol. 8, No. 3, pp. 14-19, 2007
- Yoo, S. R. and Walczyk, D., 'An Adaptive Slicing Algorithm for Profiled Edge Laminae Tooling,' International Journal of Precision Engineering and Manufacturing, Vol. 8, No. 3, pp. 64-71, 2007
- Limaye, A. S. and Rosen, D. W., 'Compensation Zone Approach to Avoid Print-though Error in Mask Projection Stereolithography Builds,' Rapid Prototyping Journal, Vol. 12, No. 5, pp. 283-291, 2006 https://doi.org/10.1108/13552540610707040
- Ribeiro Jr, A. S., Hopkinson, N. and Ahrens, C. H., 'Thermal Effects on Stereolithography Tools During Injection Moulding,' Rapid Prototyping Journal, Vol. 10, No. 3, pp. 176-180, 2004 https://doi.org/10.1108/13552540410538996
- Zak, G., Haberer, M., Park, C. B. and Benhabib, B., 'Mechanical Properties of Short-fiber Layered Composites: Prediction and Experiment,' Rapid Prototyping Journal, Vol. 6, No. 2, pp. 107-118, 2000 https://doi.org/10.1108/13552540010323583
- Li, Y., Li, D. and Lu, B., 'Introduction to Stereolithography and its Application,' Journal of Applied Optics, Vol. 9, No. 3, pp. 34-36, 1999
- Ullett, J. S., Schultz, J. W. and Chartoff, R. P., 'Novel Liquid Crystal Resins for Stereolithography-Processing Parameters and Mechanical Analysis,' Rapid Prototyping Journal, Vol. 6, No. 1, pp. 8-17, 2000 https://doi.org/10.1108/13552540010309840
- Yang, Y., Loh, H. T., Fuh, J. Y. H. and Wang, Y. G., 'Equidistant Path Generation for Improving Scanning Efficiency in Layered Manufacturing,' Rapid Prototyping Journal, Vol. 8, No. 1, pp. 30-37, 2002 https://doi.org/10.1108/13552540210413284
- Kataria, A. and Rosen, D. W., 'Building Around Inserts: Methods for Fabricating Complex Devices in Stereolithography,' Rapid Prototyping Journal, Vol. 7, No. 5, pp. 253-262, 2001 https://doi.org/10.1108/13552540110410459
- Jacobs, P. F., 'Rapid prototyping & Manufacturing,' Mcgraw-Hill, pp. 71-76, 1993
- Pham, D. T. and Ji, C., 'Design for Stereolithography,' Proceedings of the Institute of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 214, No. 5, pp. 635-640, 2000 https://doi.org/10.1243/0954406001523650
- Kochan, A., 'Rapid Prototyping Gains Speed, Volume and Precision,' Assembly Automation, Vol. 20, No. 4, pp. 295-299, 2000 https://doi.org/10.1108/01445150010378425
- Knitter, R., Bauer, W., GA-hring, D. and Risthaus, P., 'RP Process Chains for Ceramic Microcomponents,' Rapid Prototyping Journal, Vol. 8, No. 2, pp. 76-82, 2002 https://doi.org/10.1108/13552540210420943