DOI QR코드

DOI QR Code

Characteristics of Pulse MIG Arc Welding with a Wire Melting Rate Change by Current Polarity Effect

  • Kim, Tae-Jin (Power Conversion & System for RES Group, Korea Electro-technology Research Institute) ;
  • Lee, Jong-Pil (Power Conversion & System for RES Group, Korea Electro-technology Research Institute) ;
  • Min, Byung-Duk (Power Conversion & System for RES Group, Korea Electro-technology Research Institute) ;
  • Yoo, Dong-Wook (Power Conversion & System for RES Group, Korea Electro-technology Research Institute) ;
  • Kim, Cheul-U (Dept. of Elec. Eng., Pusan Nat. Univ.)
  • 발행 : 2007.09.01

초록

Joining thin aluminum alloy is difficult using most welding techniques. Many of the problems are associated with bum-through by the high heat input. Common welding techniques are TIG (Tungsten Inert Gas), MIG (Metal Inert Gas), and PULSE-MIG welding. The method provides more control of the heat balance in the welding arc by taking advantage of the different arc characteristics obtained with each of the two polarities. In this paper, we proposed a new welding method by control DSP 320C32, and the characteristic and experiment result-voltage, current, welding bead, and penetrations by this method are presented.

키워드

참고문헌

  1. B. Altshuller, 'A guide to GMA welding of aluminum', Welding Journal, vol. 77, no. 9, pp. 83-90, Aug. 1998
  2. H. Ohada, C. Ueha and K. Agatsuma, 'Innovative Vehicle - the train Hitachi review', Hitachi review, vol. 50, no. 4, pp. 130-133, Apr. 2001
  3. L. A. Guitterez, G. Neye and E. Zschech, 'Microstructure hardness profile and tensile strength in welds of aa6013 T6 extrusion', Welding Journal, vol. 75, no. 3, pp. 115-121, Mar. 1996
  4. U. Tomoyuki, 'MIG welding machine of aluminum and its Alloy', Journal of the Japan Welding Society, vol. 30, no. 3, pp. 39-44, Mar. 2001
  5. J. H. Choi, Y. S. Kim, and H. J. Kim, 'Characteristics of Metal Transfer of GMAW shielded by CO2 gas', Journal of Korea Welding Society, vol. 16, no. 3, pp. 9-17, Mar. 1998
  6. J. A. Johnson, N. M. Carlson, H. B. Smartt and D. E. Clark, 'Process control of GMAW', Welding Journal, vol. 70, no. 4, pp. 91-99, Apr. 1991
  7. J. H. Waszink and M. J. Piena, 'Experimental invcestigation of drop detachment and drop velocity in GMAW', Welding Journal, vol. 65, no. 11, pp. 289-298, Nov. 1986
  8. T. Mita, A. Sakabe and T. Yokoo, 'Quantitative estimates of Arc stability for CO2 gas shielded arc welding', Welding Journal, vol. 67, no. 2, pp. 152-159, Feb. 1988
  9. S. Ueguri, K. Hara and H. Komura, 'Study of metal transfer in pulsed GMA welding', Welding Journal, vol. 64, no. 8, pp 242-250, Aug. 1985
  10. B. Ogunbiyi and J. norrish, 'GMAW metal transfer and arc stability assessment using monitoring index', in Proc. Computer Technology in Welding, vol. 2, pp. 103-108, Feb. 1996
  11. Masao Ushio: 'Improve Sheet Metal Welding Quality & Productivity with AC Pulsed MIG Welding System' IIW Doc.XII-1629-00
  12. T. J. Kim, C. U. Kim, R. H. Rim, 'Development of a power supply for the Pulse MIG arc welding with the changes of output current polarity', in Proc. IEEE IECON'04, vol 1., pp. 203-206, Nov. 2004
  13. T. J. Kim, J. P. Lee, H. U. Park, C. U. Kim, 'Development of a power supply for the pulse MIG arc welding with a wire melting rate change', in Proc. IEEE PESC'06, vol 2., pp. 1108-1111, Jun. 2006

피인용 문헌

  1. The Effect of EN Ratio and Current on Microstructural and Mechanical Properties of Weld Joined by AC-GMAW on Square Groove Butt Joints vol.7, pp.3, 2017, https://doi.org/10.3390/app7030261
  2. Multi response Optimization of Friction stir welding process parameters in dissimilar alloys using Grey relational analysis vol.390, pp.1757-899X, 2018, https://doi.org/10.1088/1757-899X/390/1/012061