Abstract
Safety of large scale cable in bridge is very important because it may cause the unwanted catastrophic failure. Although the proof load were considered at the design stage, its soundness must be monitored continuously because the cable may be broken out without warning by the variable external load. The cable tension of in-use structures has been mainly measured by the resonance method and its use has been limited because of relatively large measurement uncertainty. Recently a new magnetic method was developed and its reliability is known to be good for evaluating the cable tension. In this study a system which can deliver the calibrated load to the cable was developed and the measurement reliability of developed magnetic sensor according to the change of external load was analyzed quantitatively. The effect of magnetization frequency, bias magnetic field, and temperature on the sensor output was also evaluated.
대형 구조물을 지탱하고 있는 케이블은 항상 높은 장력으로 당겨지고 있기 때문에 교량에 과도한 하중이 가해지면 안전에 큰 영향을 미칠 수 있다. 설계 시 하중을 고려하지만 안전관리 측면서 지속적인 감시의 필요성은 매우 크다. 교량 지지용 케이블이 강자성 재료로 구성되어 있고, 강자성 재료는 자구의 운동이 외부 장력에 매우 민감하기 때문이 케이블의 비투자율을 모니터링하면 현재 장력의 크기를 예측할 수 있다. 본 논문에서는 현장에서의 장력측정용 센서의 정확한 성능 평가를 위한 표준 장력 교정 시스템 개발을 목표로 기반 연구를 수행하고 있다. 즉 교정된 로드셀을 기준으로 시험 케이블에 정화한 힘을 가할 수 있는 시스템을 제작하였으며, 자체 제작한 장력 측정용 자기적 센서를 시험 케이블에 설치하고 케이블에 가한 장력에 따라 센서 출력을 정량적으로 분석하였으며, 주위의 환경이 미치는 영향도 함께 분석하였다.