DOI QR코드

DOI QR Code

"Inclined Keel" 을 이용한 컨테이너선의 추진효율 향상

Efficient Propulsion of a Container Ship Using the Inclined Keel Concept

  • Seo, Kwang-Cheol (School of Marine Science and Technology, Newcastle Univ.) ;
  • Atlar, Mehmet (School of Marine Science and Technology, Newcastle Univ.) ;
  • Kim, Hee-Jung (Dept. of Naval Architecture and Ocean Engineering., Pusan National Univ.) ;
  • Chun, Ho-Hwan (Dept. of Naval Architecture and Ocean Engineering., Pusan National Univ.) ;
  • Kang, Dae-Soo (Dept. of Naval Architecture and Ocean Engineering., Pusan National Univ.)
  • 발행 : 2007.08.20

초록

Ever increasing fuel prices and environmental concerns are forcing commercial vessel operators and designers to re-assess current vessel designs with an emphasis on their propulsion systems. The most important parameter determining propulsive efficiency is the diameter of propeller. Many investigations have been carried out to adapt a large and slow turning propeller known as one of the most robust and effective way of achieving high efficiency in ship propulsion system. However, for the same vessel a further increase of propeller diameter would require the modification of the aft end while still paying attention to the hull clearance to prevent excessive propeller excited vibrations. In order to take the advantage of this approach small workboats (e.g. tug boats, fishing vessels etc.) operate in service with a significant increase of aft draught and hence resulting "inclined keel" configuration can be observed. Although it is not unusual to see large vessels sometimes to operate with stern trim to improve their operational performance and fuel efficiency, it is rare to see a such vessel purposely built with an inclined keel feature to fit a large diameter propeller for power saving. This paper investigates the application of the inclined keel configuration to a 3600TEU container vessel with the aim of fitting an 11 % larger diameter propeller (and hence resulting 17.5 % lower rpm) to gain further power saving over the similar size basis container ship with conventional "level keel" configuration.

키워드

참고문헌

  1. 강용덕, 김문찬, 전호환, 2004, '편재된 비대칭형 전류고정날개 추진시스템에 관한 연구,' 대한조선학회 논문집, 제 41권, 제 3호, pp. 13-21
  2. 김영기, 이창섭, 백명철, 유재훈, 1992, '상반회전 프로펠러의 성능 추정에 관한 연구,' 대한조선학회 추계학술발표회, pp. 336-342
  3. 김현열, 김문찬, 전호환, 2004, '궤도 차량용 물 분사 추진 장치의 임펠러 직경 변화에 따른 성능 배교,' 대한조선학회 춘계학술발표회, pp. 508-514
  4. 양지만, 이신형, 김효철, 2006, '대형유조선의 저항 추진성능에 미치는 자세변화의 영향에 관한 연구,' 대한조선학회 논문집, 제 43권, 제 3호, pp. 275-284 https://doi.org/10.3744/SNAK.2006.43.3.275
  5. 최영복, 황윤식, 장영훈, 김병국, 2004, '추진기 최적 파라메타 선정에 대한 고찰,' 대한조선학회, 추계학술발표대회, pp. 556-564
  6. Ashidate, I. and Onogi, H., 1981. Development of Stem Shape Suitable to Equip with a Low-rotation/Large Diameter Propeller. Nippon Kokan Technical Report. pp. 47-54
  7. Ciping, J., Liangquan, C. and Weiming, T., 1989. 'Investigation on Resistance and Propulsive Qualities of Large Full Ship with Low Revolution Large Diameter Propeller.' Inter Symp On Ship Resistance and Powering Performance. pp. 184-190
  8. Della Loggia. B.D.L. and Cappelli, S., 1981. 'Experiments on Propulsive Arrangements with Slow Tuming Large Diameter Propellers.' Bulletin De L'association Technique. Maritime et Aeronautique. pp. 479-505
  9. Flowtech, 2007, ' Developer of Software for Computational Fluid Dynamics,' http://www.flowtech.se
  10. Kadoi, H., 1980, 'Reduction in Power of Ships Resulting From Improved Propulsive Efficiency (Power Savings by means of Large, Slow Turning Propeller),' Bulletin of the Marine Engineering Society of Japan, Vol. 8, No. 4, pp. 331-337
  11. MotorShip, 1981, 'The Ideas behind B.&W.'s Economy Hull Designs,' The Motor Ship. 58, pp. 70-72
  12. MotorShip, 1990, 'Machinery Technology Provides Better Alternatives,' The Motor Ship. 70, pp. 19-22
  13. Rankine, W.J.M., 1865, 'On the Mechanical Principles of the Action of Propellers,' Trans.R.I.N.A., pp. 13-39