International Journal of Automotive Technology

  • 제8권2호
  • /
  • Pages.203-209
  • /
  • 2007
  • /
  • 1229-9138(pISSN)
  • /
  • 1976-3832(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지

DEVELOPMENT OF HARDWARE-IN-THE-LOOP SIMULATION SYSTEM AS A TESTBENCH FOR ESP UNIT

  • Lee, S.J. (Hyundai Mobis) ;
  • Park, K. (Graduate School of Automotive Engineering, Kookmin University) ;
  • Hwang, T.H. (Graduate School of Automotive Engineering, Kookmin University) ;
  • Hwang, J.H. (Graduate School of Automotive Engineering, Kookmin University) ;
  • Jung, Y.C. (Hyundai Mobis) ;
  • Kim, Y.J. (Hyundai Mobis)
  • 발행 : 2007.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

As the vehicle electronic control technology quickly grows and becomes more sophisticated, a more efficient means than the traditional in-vehicle driving test is required for the design, testing, and tuning of electronic control units (ECU). For this purpose, the hardware-in-the-loop simulation (HILS) scheme is very promising, since significant portions of actual driving test procedures can be replaced by HIL simulation. The HILS incorporates hardware components in the numerical simulation environment, and this yields results with better credibility than pure numerical simulations can offer. In this study, a HILS system has been developed for ESP (Electronic Stability Program) ECUs. The system consists of the hardware component, which that includes the hydraulic brake mechanism and an ESP ECU, the software component, which virtually implements vehicle dynamics with visualization, and the interface component, which links these two parts together. The validity of HIL simulation is largely contingent upon the accuracy of the vehicle model. To account for this, the HILS system in this research used the commercial software CarSim to generate a detailed full vehicle model, and its parameters were set by using design data, SPMD (Suspension Parameter Measurement Device) data, and data from actual vehicle tests. Using the developed HILS system, performance of a commercial ESP ECU was evaluated for a virtual vehicle under various driving conditions. This HILS system, with its reliability, will be used in various applications that include durability testing, benchmarking and comparison of commercial ECUs, and detection of fault and malfunction of ESP ECUs.

키워드

참고문헌

  1. Lee, S. J., Kim, Y. J., Park, K. and Kim, D. G. (2003). Development of hardware-in-the-loop simulator and vehicle dynamic model for testing ABS. SAE Paper No. 2003-01-0858
  2. MSC Co. (2001). CarSim User Manual. Michigan.
  3. MathWorks Co. (2002). Simulink User Manual. Michigan. USA
  4. Matsumoto, S., Yamaguchi, H., Inoue, H. and Yasuno, Y. (1992). Braking force distribution control for improved vehicle dynamics. Proc. AVEC, 441-446
  5. Opal RT Inc. (2002). RT Lab User's Manual. Michigan. USA
  6. Park, K. and Heo, S. J. (2000). Design of a control logic for improving vehicle dynamic stability. Proc. AVEC, 577-584
  7. Park, K., Lee, S. J., Cho, Y. J. and Seo, Y. S. (2003). Development of hardware-in-the-loop simulation system for TCS ECU. Fall Conf. Proc., Korean Society of Automotive Engineers, 1007-1013
  8. Suh, M. W., Seok, C. S., Kim, Y. J., Chung, J. H., Kim, S. M., Lee, J. C. and Lee, S. I. (1998). Hardware-in-theloop simulation for ABS. SAE Paper No. 980244
  9. Tseng, H. E., Ashrafi, B., Madau, D., Brown, T. A. and Recker, D. (1999). The development of vehicle stability control at Ford. IEEE/ASME Trans. Mechatronics 4, 3, 223-234 https://doi.org/10.1109/3516.789681
  10. Zanten, A. T. V., Erhardt, R., Pfaff, G., Kost, F., Hartmann, U. and Ehret, T. (1996). Control aspects of the Bosch-VDC. Proc. AVEC, 573-607
  11. Zanten, A. T. V. (2000). Bosch ESP systems: 5 years of experience. SAE Paper No. 2000-01-1633
  12. Zhang, Y., Yin, C. and Zhang, J. (2006). Vehicle dynamic control algorithm and its implementation on control prototyping system. Int. J. Automotive Technology 7, 2, 167-172