참고문헌
- Arvizzigno, A. (2002). Private Communication, Bosch - CSIT, Bari, Italy
- Badami, M., Mallamo, F., Millo, F. and Rossi, E. E. (2003). Experimental investigation on the effect of multiple injection strategies on emissions, noise and brake specific fuel consumption of an automotive direct injection common rail diesel engine. Int. J. Engine Research 4, 4, 299-314 https://doi.org/10.1243/146808703322743903
- Bae, C. and Kang, J. (2000). Diesel spray characteristics of common rail VCO nozzle injectors. THIESEL 2000 Conf. Thermo and Fluid-Dynamic Processes in Diesel Engines, Valencia, Spain
- Bermudez, V., Payri, R., Salvador, F. J. and Plazas, A. H. (2005). Study of the influence of nozzle seat type on injection rate and spray behavior. Proc. Institution of Mechanical Engineers, 219, Part D, J. Automobile Engineering, 677-689
- Boehner, W. and Hummel, K. (1997). Common rail injection system for commercial diesel vehicles. SAE Paper No. 970345
- Bosch, W. (1996). The fuel rate indicator: a new measuring instrument for display of the characteristics of individual injection. SAE Paper No. 660749
- Carlucci, P., Ficarella, A. and Laforgia, D. (2003a). Effects of pilot injection parameters on combustion for common-rail diesel engines. SAE Paper No. 2003-01-0700
- Carlucci, P., Ficarella, A., Giuffrida, A. and Lanzafame, R. (2003b). Investigation on realizing fuel rate shaping using a common rail injector. ASME ICES 2003 Spring Technical Conf., Salzburg, Austria, May 11-14
- Carlucci, A., Ficarella, A., Chiara, F., Giuffrida, A. and Lanzafame, R. (2004). Preliminary studies on the effects of injection rate modulation on the combustion noise of a common rail diesel engine. SAE Paper No. 2004-01-1848
- Carlucci, P., Ficarella, A. and Laforgia, D. (2005). Effects on combustion and emissions of early and pilot fuel injections in diesel engines. Int. J. Engine Research 6, 1, 43-60 https://doi.org/10.1243/146808705X7301
- Ficarella, A., Laforgia, D. and Landriscina, V. (1999). Evaluation of instability phenomena in a common rail injection system for high speed diesel engines. SAE Paper No. 1999-01-0192
- Ficarella, A., Giuffrida, A. and Lanzafame, R. (2005). Common rail injector modified to achieve a modulation of the injection rate. Int. J. Automotive Technology 6, 4, 305-314
- Ganser, M. A. (2000). Common rail injectors for 2000 bar and beyond. SAE Paper No. 2000-01-0706
- Han, J. S., Wang, T. C., Xie, X. B., Lai, M. C., Henein, N. A., Harrington D. L., Pinson, J. and Miles, P. (2000). Dynamics of multiple injection fuel sprays in a small bore HSDI diesel engine. SAE Paper No. 2000-01-1256
- Henein, N. A., Lai, M. C., Singh, I. P., Zhong, L. and Han, J. (2002). Characteristics of a common rail diesel injection system under pilot and post injection modes. SAE Paper No. 2002-01-0218
- Iiyama A., Masumoto Y., Kawamoto K. and Ohishi T. (1992). Spray formation improvement of a VCO nozzle for DI diesel smoke reduction. ImechE Seminar on Diesel Fuel Injection Systems, Birmingham, UK
- Kampmann, S., Dittus, B., Mattes, P. and Kirner, M. (1996). The influence of hydro grinding at VCO nozzles on the mixture preparation in a DI diesel engine. SAE Paper No. 960867
- Kitayama, N., Montajir, R. M., Oonishi, H., Ishitani, H. and Tsunemoto, H. (2003). Cylinder to cylinder deviations in combustion and emission at idling in DI diesel engines with pilot injection. JSME Int. J., Series B, 46, 1, 117-123 https://doi.org/10.1299/jsmeb.46.117
- Lyu, M. S. and Shin, B. S. (2002). Study of nozzle characteristics on the performance of a small-bore high-speed direct injection diesel engine. Int. J. Engine Research 3, 2, 69-79 https://doi.org/10.1243/14680870260127864
- Mahr, B. (2002). Future and potential of diesel injection systems. THIESEL 2002 Conf. Thermo and Fluid- Dynamic Processes in Diesel Engines, Valencia, Spain
- Mulemane, A., Han, J. S., Lu, P. H., Yoon, S. J. and Lai, M. C. (2004). Modeling dynamic behavior of diesel fuel injection systems. SAE Paper No. 2004-01-0536
- Nam, K., Yoon, M., Park, S. and Sunwoo, M. (2004). Development of a sensorless estimation algorithm of the injection timing and rate for common rail injector. JSME Int. J., Series C, 47, 3, 882-888 https://doi.org/10.1299/jsmec.47.882
- Payri, R., Climent, H., Salvador, F. J. and Favennec, A. G. (2004). Diesel injection system modeling - Methodology and application for a first generation common rail system. Proc. Institution of Mechanical Engineers, 218, Part D, J. Automobile Engineering, 81-91
- Soteriou, C., Andrews, R. J. and Smith, M. (1995). Direct injection diesel sprays and the effect of cavitation and hydraulic flip on atomisation. SAE Paper No. 950080
- Stumpp, G. and Ricco, M. (1996). Common rail - An attractive fuel injection system for passenger car DI diesel engines. SAE Paper No. 960870
- Tanaka, T., Ando, A. and Ishizaka, K. (2002). Study on pilot injection of DI diesel engine using common rail injection system. JSAE Review, 23, 297-302 https://doi.org/10.1016/S0389-4304(02)00195-9
- Wang, T. C., Han, J. S., Xie, X. B., Lai, M. C., Henein, N. A., Schwarz, E. and Bryzik, W. (2003). Parametric characterization of high-pressure diesel fuel injection systems. ASME J. Engineering for Gas Turbines and Power 125, 2, 412-426 https://doi.org/10.1115/1.1498268