참고문헌
- R. M. Heck and R. J. Farrauto, 'Automobile Exhaust Catalysts,' Applied Catalysis A, General 221, pp.443-457, 2001 https://doi.org/10.1016/S0926-860X(01)00818-3
- V. K. Chakravarthy, J. C. Conklin, C. S. Daw and E. F. D'Azevedo, 'Multi-Dimensional Simulations of Cold-Start Transients in a Catalytic Converter Under Steady Inflow Conditions,' Applied Catalysis, A: General 241, pp.289-306, 2003 https://doi.org/10.1016/S0926-860X(02)00490-8
- X. Fu, D. W. Lambert, G. S. Mclaren, D. R. Treacy and P. M. Then, '3D Computational and Experimental Fluid Dynamics Analysis for the Automotive Catalytic Converter,' Proceedings of the ASME Fluids Engineering Division, FED-Vol. 247, 1998
- S. Shijin, J. Wang and R. Zhuang, 'Numerical Simulation and Optimum Design of Automotive Catalytic Converters,' FISITA Congress, Paper No. F2000H205, Seoul, Korea, 2000
- C. Yi, J. Suh, H. Chung, H. Jeong and Jaeyoung Bae, 'Exhaust Gas Temperature Characteristics of Catalytic Converter Shape for Motorcycle,' Transactions of KSAE, Vol.14, No.5, pp.138- 144, 2006
- C. Yi, H. Chung, H. Jeong, J. Suh and C. Lee, 'A Study on the Geometry Decision of Catalytic Converter for Motorcycle,' Transactions of KSAE, Vol.14, No.6, pp.137-142, 2003
- D. W. Wendland and W. R. Mattes, 'Visualization of Automotive Catalytic Converter Internal Flow,' SAE 861554, 1986
- D. W. Wendland, W. R. Mattes and R. L. Sorrel, 'Effect of Header Truncation on Monolith Converter Emission-Control Performance,' SAE 922340, 1992
- D. W. Wendland, J. Kreucher and E. Andersen, 'Reducing Catalytic Converter Pressure Loss with Enhanced inlet-Header Diffusion,' SAE 952398, 1995
- H. Weltens, H. Bressler, F. Terres, H. Neumaier and D. Rammoser, 'Optimisation of Catalytic Converter Gas Flow Distribution by CFD Prediction,' SAE 930780, 1993