디스크 브레이크에서 접촉 마찰 진동이 열섬에 미치는 영향 연구

A Study of Frictional Contact Vibration Influence on Hot Spot in Automotive Disk Brake

  • 발행 : 2007.01.01

초록

Hot spot phenomenon that occurs, during judder vibration, is locally concentrated heat due to friction between brake disk and pad. It is important to understand the reason behind hot spot phenomenon, for reduction of judder vibration. In this experimental study, experiments were performed in accordance with rotation speed of brake disk, pressure of master cylinder and pad length for achieving different aspects of hot spot phenomenon. Temperature distribution of hot spot was obtained by using the infrared camera. As the hot spot occurred, vibration was measured and frequency analysis was performed. Finite element analysis of thermal deformation of disk was performed by using temperature distribution that was achieved by experimental results. And mode shapes of disk was analyzed by finite element analysis and compared with experimental results. It was observed that the excitation frequency band of frictional contact and frictional force mainly affects the hot spot phenomenon.

키워드

참고문헌

  1. K. A. Mohamed, 'Brake Judder Analysis : Case Studies,' SAE 972027, 1997
  2. K. Lee and B. D. Palph, 'Condition of Frictional Contact in Disk Brake and Their Effect on Brake Judder,' SAE 980598, 1998
  3. B. Lee, C. Cho, S. Lee and H. Cho, 'Computer Simulation on Mechanical Evaluation of Ceramic Matrix Composite Automobile Brake Disks,' PacRim5 Special Issue, Vol.112, No.5, pp.S423-S427, 2004
  4. A. Vries and M. Wagner, 'The Brake Judder Phenomenon,' SAE Technical Paper Series, SAE920554 (SP-914), pp.25-33, 1992
  5. S. Youn, and M. Han, 'Study on Brake Judder Caused by Disk Runout and Disk Thickness Variation,' Transactions of KSAE, Vol.7, No.2, pp.378-386, 1999
  6. S. Gassmann and H. G. Engel, 'Excitations and Transfer Mechanism of Brake Judder,' SAE 931880, 1993
  7. H. Cho, M. Kim, J. Maeng and C. Cho, 'Analysis of the cause for judder vibration of automotive disk brake,' Fall Conference Proceedings, Vol.III, KSAE, pp.1056-1061, 2005