DOI QR코드

DOI QR Code

Development of 1.2[kW]Class Fuel Cell Power Conversion System

1.2[kW]급 연료전지용 전력변환장치의 개발

  • 서기영 (경남대학교 전기공학과) ;
  • 김칠용 (경남대 대학원 전기공학과) ;
  • 조만철 (경남대 대학원 전기공학과) ;
  • 김정도 (경남대 대학원 전기공학과) ;
  • 윤영변 (경남대 대학원 전기공학과) ;
  • 김홍신 (경남대 대학원 전기공학과) ;
  • 박도형 (경남대 대학원 전기공학과) ;
  • 하성현 (경남대 대학원 전기공학과)
  • Published : 2007.07.31

Abstract

Recently, a fuel cell with low voltage and high current output characteristics is remarkable for new generation system. It needs both a DC-DC step-up converter and DC-AC inverter to be used in fuel cell generation system. Therefor, this paper, consists of an isolated DC-DC converter to boost the fuel cell voltage 380[VDC] and a PWM inverter with LC filter to convent the DC voltage to single-phase 220[VAC]. Expressly, The fuel cell system which it proposes DC-DC the efficient converter used PWM the phase transient control law and it depended to portion resonance ZVS switching, loss peek voltage and electric current of realization under make schedule, switching frequency anger and the switch reduction. And mind benevolence it sprouted 2 in stop circuit and it added and a direct current voltage and the electric current where the ingredient is reduced in load side ripple stable under make whom it will be able to supply. Besides the efficiency of 92[%]is obtained over the wide output voltage regulation ranges and load variations. Also, under make over together the result leads simulation and test, the propriety confirmation.

연료전지 발전시스템에서는 DC-DC 승압용 컨버터와 DC-AC 인버터가 필요하다. 그러므로 본 논문에서는 연료전지의 전압을 380[VDC]로 승압하기 위한 절연형 DC-DC 컨버터와 단상 220[VAC]로 변환하기 위한 LC필터를 가진 PWM 인버터로 구성된 전력변환장치를 제안하였다. 특히 제안한 연료전지 시스템용 고효율 DC-DC 컨버터는 위상천이 PWM 제어법을 이용하여 부분 공진에 의한 ZVS를 실현하였으며, 일정 스위칭 주파수화 및 스위치의 스위칭 손실, 피크 전압과 전류를 저감시켰다. 그리고, 정류회로에 2개의 인덕터를 첨가하여 리플성분이 저감된 직류전압과 전류를 부하측에 안정하게 공급할 수 있었다. 또한, 넓은 출력 전압 조정에도 효율을 92[%]정도 얻을 수 있다. 이상과 같이 결과는 시뮬레이션과 실험을 통하여 그 타당성을 확인하였다.

Keywords

References

  1. 최세완, '연료전지 발전시스템에서의 전력전자기술', 전력전자학회지, 제 8권, 제4호, pp. 30-35, 2003
  2. A. B. Stambouli and E. Traversa, 'Fuel cells, an alternative to stansources of energy,' Renewable Sustainable Energy Rev., vol. 6, pp. 297 306, 2002
  3. Patterson and D. M. Divan, 'Pseudo-resonant full bridge DC/DC converter', IEEE PESC Record, Vol. 2, pp. 424-430, 1987
  4. J.A. Sabate, B.H. Cho, 'Design considerations for high voltage high-power full-bridge zero-voltage switched PWM converter', Proc. IEEE APEC conf., pp. 275-284, 1990
  5. E.S.Kim, B.D.Yoon, 'An improved soft-switching PWM FB DC/DC converter for reducing conduction losses', IEEE Trans., Vol. 14, No.2, pp. 258-263, 1999
  6. J.G. Cho, J.W. Back, C.Y. Jeong, D.W. Yoo, and K.Y. Joe,'Novel zero-voltage and zero-current-switching full bridge PWM converter using transformer auxiliary winding', IEEE Trans., Vol. 15, No.2, pp. 250-257, 2000
  7. S.J. Jeon, G. H. Cho, 'A zero-voltage and zero-current switching full bridge DC-DC converter with transformer isolation', IEEE Trans., Vol. 16, No. 5, pp. 573-580, 2001
  8. 권형남, 정홍주 외3인, '연료전지용 전력변환장치의 DC-DC 컨버터개발', 전력전자학회 추계학술대회, pp.94-96, 2002
  9. M. G. Simoes, P. K. Sen, 'Resonant AC link System Converter for Fuel Cell Grid Interface', IEEE lECON Conf. Rec., pp. 1953-1958, 2001
  10. Andrew Dicks, 'Fuel Cell Handbook, sixth Edition' EG & G Technical Services Inc., May 2002
  11. J. E. Larminie and A. Dicks, 'Fuel Cell Systems Explained. Chichester' ,U.K.: Wiley, 2000, p. 308
  12. Nergaard, Jih-Sheng Lai, 'Design considerations for a 48[V]fuel cell to split single phase inverter system with ultracapacitor energy storage', in Conf. Rec. of IEEE PESC, pp.2007-2012, 2002
  13. S.J.Jang, T.W.Lee, W.C.Lee, C.Y.Won, 'Bi-directional DC-DC Converter for Fuel Cell Generation System', Conf. Rec. of IEEE PESC, pp.4722-4728, 2004
  14. 장수진, 김진태, 원충연, '능동 클램프 전류형 하프 브리지 컨버터를 적용한 연료전지 발전시스템', 전력전자학회논문지, 제10권 1호, pp.78-86, 2005
  15. 조진상, 정상민, 최세완, '연료전지자동차에서 연료이용률과 연료전지 내구성 향상을 위한 양방향 DC-DC 컨버터의 제어기법', 전력전자학회논문지, 제10권 1호, pp.428-435, 2005