References
- Clavel, R., 'Delta, a Fast Robot with Parallel Geometry,' 18th Int. Sym. on Industrial Robots, pp. 91-100, 1988
- Tsai, L. W., 'Kinematics of a Three-DOF Platform Manipulator with Three Extensible Limbs,' Advances in Robot Kinematics, pp. 401-410, 1996
- Kim, H. S. and Tsai, L. W., 'Design Optimization of a Cartesian Parallel Manipulator,' J. of Mechanical Design, Vol. 125, No. 1, pp. 43-51, 2003 https://doi.org/10.1115/1.1543977
- Liu, X. J., 'Optimal Kinematic Design of a Three Translational DoFs Parallel Manipulator,' Robotica, Vol. 24, No.2, pp. 239-250, 2006 https://doi.org/10.1017/S0263574705002079
- Gao, F., Liu, X. and Gruver, W. A., 'Performance Evaluation of Two-Degree-Of-Freedom Planar Parallel Robots,' Mechanisms and Machine Theory, Vol. 33, No.6, pp. 661-668, 1998 https://doi.org/10.1016/S0094-114X(97)00102-X
- Atia, K. R. and Cartmell, M. P., 'A General Dynamic Model for a Large-Scale 2-DOF Planar Parallel Manipulator,' Robotica, Vol. 17, No.6, pp. 675-683, 1999 https://doi.org/10.1017/S0263574799001794
- Liu, X. J., Wang, J. and Pritschow, G., 'On the Optimal Kinematic Design of the PRRRP 2-DOF Parallel Mechanism,' Mechanism and Machine Theory, Vol. 41, No.9, pp. 1111-1130, 2006 https://doi.org/10.1016/j.mechmachtheory.2005.10.008
- Dong, J., Yuan, C., Stori, J. A. and Ferreira, P. M., 'Development of a High-speed 3-axis Machine Tool using a Novel Parallel-kinematics X-Y Table,' Int. J. of Machine Tools and Manufacture, Vol. 44, No. 12/13, pp. 1355-1371, 2004 https://doi.org/10.1016/j.ijmachtools.2004.04.009
- Li, Y. and Xu, Q., 'A Novel Design and Analysis of a 2-DOF Compliant Parallel Micromanipulator for Nanomanipulation,' IEEE Trans. on Automation Science and Engineering, Vol. 3, No.3, pp. 248-254, 2006
- Liu, X. J., Wang, Q. M. and Wang, J., 'Kinematics, Dynamics and Dimensional Synthesis of a Novel 2DOF Translational Manipulator,' J. of Intelligent and Robotic Systems, Vol. 41, No.4, pp. 205-224, 2005 https://doi.org/10.1007/s10846-005-3507-z
- Liu, X. J. and Wang, J., 'Some New Parallel Mechanisms Containing the Planar Four-Bar Parallelogram,' J. of Robotics Research, Vol. 22, No. 9, pp.717-732, 2003 https://doi.org/10.1177/02783649030229003
- Huang, T., Li, Z., Li, M., Chetwynd, D. G and Gosselin, C. M., 'Conceptual Design and Dimensional Synthesis of a Novel 2-DOF Translational Parallel Robot for Pick-and-Place Operations,' J. of Mechanical Design, Vol. 126, No.3, pp. 449-455, 2004 https://doi.org/10.1115/1.1711822
- Kong, X. and Gosselin, C. M., 'Type Synthesis of Input-Output Decoupled Parallel Manipulators,' Trans. of the Canadian Society for Mechanical Engineering, Vol. 28, No. 2A, pp. 185-196, 2004 https://doi.org/10.1139/tcsme-2004-0014
- Liu, X. J., Tang, X. and Wang, J., 'HANA: a novel Spatial Parallel Manipulator with One Rotational and Two Translational Degrees Of Freedom,' Robotica, Vol. 23, No.2, pp. 257-270, 2005 https://doi.org/10.1017/S0263574704000931
- Kim, H. S. and Choi, Y. J., 'The Forward/Inverse Force Transmission Analyses of the Stewart Platform,' J. of KSPE, Vol. 16, No. 5, pp. 200-208, 1999
- Joshi, S. A. and Tsai, L. W, 'Jacobian Analysis of Limited-DOF Parallel Manipulators,' J. of Mechanical Design, Vol. 124, No.2, pp. 254-258, 2002 https://doi.org/10.1115/1.1469549