참고문헌
- S. H. Zhang, K. Zhang, Y. C. Xu, Z. T. Wang, Y. Xu, Z. G. Wang, 2007, Deep-drawing of magnesium alloy sheets at warm temperatures, J. Mat. Proc. Tech. Vol. 185, pp. 147-151 https://doi.org/10.1016/j.jmatprotec.2006.03.150
- S. Yoshihara, K. Manabe, H. Nishimura, 2005, Effect of blank holder force control in deepdrawing process of magnesium alloy sheet, J. Mat. Proc. Tech. Vol. 170, pp. 579-585 https://doi.org/10.1016/j.jmatprotec.2005.06.028
- T. B. Huang, Y. A. Tsai, F. K. Chen, 2006, Finite element analysis and formability of non-isothermal deep drawing of AZ31B sheets, J. Mat. Proc. Tech, Vol. 177, pp. 142-145 https://doi.org/10.1016/j.jmatprotec.2006.04.088
- 김한구, 배정운, 추동균, 강충길, 2006, AZ31B 마그네슘 판재의 온.열간 딮드로잉에 관한 연구, 한국소성가공학회지, 제15권, 제7호, pp. 504-511 https://doi.org/10.5228/KSPP.2006.15.7.504
- 김홍규, 이위로, 홍석관, 김종덕, 한병기, 2006, 마그네슘 합금 AZ31 판재의 온간 사각컵 디프드로잉 공정의 유한요소 해석, 한국소성가공학회지, 제15권, 제3호, pp. 232-240 https://doi.org/10.5228/KSPP.2006.15.3.232
- T. Naka, G. Torikai, R. Hino, F. Yoshida, 2001, The effects of temperature and forming speed on the forming limit diagram for type 5083 aluminum magnesium alloy sheet, J. Mat. Proc. Tech., Vol. 113, pp. 648-653 https://doi.org/10.1016/S0924-0136(01)00650-1
- F. K. Chen, T. B. Huang, 2003, Formability of stamping magnesium-alloy AZ31 sheets, J. Mat. Proc. Tech., Vol. 142, pp. 643-647 https://doi.org/10.1016/S0924-0136(03)00684-8
- C. Bruni, A. Forcellese, F. Gabrielli, M. Simoncini, 2006, Air bending of AZ31 magnesium alloy in warm and hot forming conditions, J. Mat, Proc. Tech., Vol. 177, pp 373-376 https://doi.org/10.1016/j.jmatprotec.2006.03.222
- J. K. Lee, G. L. Kinzel, R. H. Wagoner, 1996, NUMISHEET'96
- 최선철, 김형종, 2006, 고해상도 화상처리를 통한 자동 변형률 측정의 정확도와 편의성 개선, 한국소성가공학회 제5회 박판성형심포지엄, pp. 34-39
- A. Makinouchi, E. Nakamachi, E. Onate, R. H. Wagoner, 1993, NUMISHEET'93
피인용 문헌
- Study of Forming Limit for Rotational Incremental Sheet Forming of Magnesium Alloy Sheet vol.41, pp.1, 2010, https://doi.org/10.1007/s11661-009-0043-7
- A Study on Warm Forming Technology of Car Body Reinforced Dash Using Magnesium Alloy Sheet vol.23, pp.5, 2014, https://doi.org/10.7735/ksmte.2014.23.5.519
- A Study on the Mechanical Properties and Formability of Mg AZ31B Sheet vol.23, pp.8, 2014, https://doi.org/10.5228/KSTP.2014.23.8.495