DOI QR코드

DOI QR Code

알루미늄 도핑된 산화아연 양극을 적용한 고효율 유기발광다이오드

Efficient Organic Light-emitting Diodes with Aluminum-doped Zinc Oxide Anodes

  • 이호년 (순천향대학교 전자정보공학과) ;
  • 이영구 (삼성종합기술원 디스플레이 디바이스&프로세싱 랩) ;
  • 정종국 (한국산업기술대학교 신소재공학과) ;
  • 이성의 (한국산업기술대학교 신소재공학과) ;
  • 오태식 (선문대학교 전자공학부)
  • 발행 : 2007.08.01

초록

Properties of organic light-emitting diodes (OLEDs) with aluminum-doped zinc oxide (ZnO:Al) anodes showed different behaviors from OLEDs with indium tin oxide (ITO) anodes according to driving conditions. OLEDs with ITO anodes gave higher current density and luminance in lower voltage region and better EL and power efficiency under lower current density conditions, However, OLEDs with ZnO:Al anodes gave higher current density and luminance in higher voltage region over about 8V and better EL and power efficiency under higher current density over $200mA/cm^2$. These seemed to be due to the differences in conduction properties of semiconducting ZnO:Al and metallic ITO. OLEDs with ZnO:Al anodes showed nearly saturated efficiency under high current driving conditions compared with those of OLEDs with ITO anodes. This meant better charge balance in OLEDs with ZnO:Al anodes. These properties of OLEDs with ZnO:Al anodes are useful in making bright display devices with efficiency.

키워드

참고문헌

  1. C. W. Tang and S. A. VanSlyke, 'Organic electroluminescent diodes', Appl. Phys. Lett., Vol. 51, p. 913, 1987 https://doi.org/10.1063/1.98799
  2. G. Gustafsson, Y. Cao, G. M. Treacy, F. Klavetter, N. Colaneri, and A. J. Heeger, 'Flexible light-emitting diodes made from soluble conducting polymers', Nature, Vol. 357, p. 477, 1992 https://doi.org/10.1038/357477a0
  3. C. Adachi, K.. Nagai, and N. Tamoto, 'Molecular design of hole transport materials for obtaining high durability in organic electroluminescent diodes', Appl. Phys. Lett., Vol. 66, p. 2679, 1995 https://doi.org/10.1063/1.113123
  4. A. Rajagopal and A. Khan, 'Photoemission spectroscopy investigation of magnesium - Alq3 interfaces', J. Appl. Phys., Vol. 84, p. 355, 1998 https://doi.org/10.1063/1.368035
  5. Y. He and J. Kanicki, 'High-efficiency organic polymer light-emitting heterostructure devices on flexible plastic substrates', Appl. Phys. Lett., Vol. 76, p. 661, 2000 https://doi.org/10.1063/1.125854
  6. 김두석, 장윤기, 권영수, 'ITO 표면 처리와 음전극 변화에 따른 OLEDs 특성 연구', 전기전자재료학회논문지, 18권, 12호, p. 1143, 2005
  7. 김중연, 강성종, 조재영, 김태구, 오환술, '플라즈마 조건 변화에 따른 ITO 특성 분석 및 유기발광소자의 제작에 관한 연구', 전기전자재료학회논문지, 18권, 10호, p. 941, 2005
  8. H. Kim, A. Pique, J. S. Horwitz, H. Mattoussi, H. Murata, Z. H. Kafafi, and D. B. Chrisey, 'Indium tin oxide thin films for organic light-emitting devices', Appl. Phys. Lett., Vol. 74, p. 3444, 1999 https://doi.org/10.1063/1.124122
  9. H. Kim, C. M. Gilmore, A. Pique', J. S. Horwitz, H. Mattoussi, H. Murata, Z. H. Kafafi, and D. B. Chrisey, 'Electrical, optical, and structural properties of indium - tin - oxide thin films for organic light-emitting devices', J. Appl. Phys., Vol. 86, p. 6451, 1999 https://doi.org/10.1063/1.371708
  10. T. Minami, 'New n-type transparent conducting oxides', MRS Bulletin, Vol. 25, p. 38, 2000
  11. T. J. Coutts, D. L. Young, and X. Li, 'Characterization of transparent conducting oxides', MRS. Bulletin, Vol. 25, p. 58, 2000 https://doi.org/10.1557/mrs2000.152
  12. T. Minami, S. Suzuki, and T. Miyata, 'Transparent conducting impurity-co-doped ZnO:AI thin films prepared by magnetron sputtering', Thin Solid Films, Vol. 398-399, p. 53, 2001
  13. M. Gabas, S. Gota, J. R. Ramos-Barrado, M. Sanchez, N. T. Barrett, J, Avila, and M. Sacchi, 'Unraveling the conduction mechanism of Al-doped ZnO films by valence band soft x-ray photoemission spectroscopy', Appl. Phys. Lett., Vol. 86, 042104, 2005 https://doi.org/10.1063/1.1856141
  14. X. Jiang, F. L. Wong, M. K. Fung, and S. T. Lee, 'Aluminum-doped zinc oxide films as transparent conductive electrode for organic light-emitting devices', Appl. Phys. Lett., Vol. 83, p. 1875, 2003 https://doi.org/10.1063/1.1605805
  15. W. Shi, S. Fan, F. Huang, W. Yang, R. Liu, and Y. Cao, 'Synthesis of novel triphenylamine-based conjugated polyelectrolytes and their application as hole-transport layers in polymeric light-emitting diodes', J. Mater. Chem., Vol. 16, p. 2387, 2006 https://doi.org/10.1039/b603704f
  16. S. Kim, T. Noh, and S. Lee, 'High efficiency polymeric light-emitting diodes with a blocking layer', Synthetic metals, Vol. 153, p. 229, 2005 https://doi.org/10.1016/j.synthmet.2005.07.276
  17. G. Greczynski, T. Kugler, M. Keil, W. Osikowicz, M. Fahlman, and W. R. Salanec, 'Photoelectron spectroscopy of thin films of PEDOT-PSS conjugated polymer blend: a mini-review and some new results', J. Electron Spectrosc. Relat. Phenom., Vol. 121, p. 1, 2001 https://doi.org/10.1016/S0368-2048(01)00323-1
  18. Y. Lee, H. Lee, S. Kang, T. Oh, S. Lee, and K. Koh, 'Fabrication of highly efficient and stable doped red organic light-emitting device using 2-methyl-9,10-di(2-napthyj) anthracene and tris(8-hydroxyquinolinato) aluminum as cohost materials, Appl. Phys. Lett., Vol. 89, 183515, 2006 https://doi.org/10.1063/1.2374811