초록
주요 조림수종으로 도입 식재된 리기다소나무의 고부가가치 이용을 위한 구조용 집성재 이용 가능성을 검토하고, 이에 적합한 기술을 개발하기 위하여 본 연구를 수행하였다. 국산 리기다소나무 제재목의 기계응력등급은 대부분 E7에서 E9등급으로 집성재 제조에는 다소 불량한 것으로 나타났다. 반면 단일수종 및 혼합수종 구조용 집성재 제조에 필수적인 리기다소나무 및 낙엽소 판재의 접착성을 평가한 결과 전단접착력, 목파율, 침지 및 삶음박리율 모두 KS기준 이상으로 나타났다. 리기다소나무 단일수종 집성재의 휨성능을 측정해본 결과 휨강도는 KS의 집성재 강도등급에 따른 휨성능 합격기준을 만족한 반면 휨 탄성계수는 기준에 다소 못 미치는 결과를 나타내었다. 그러나 낙엽송 층재와의 혼합구성을 통해 리기다소나무 집성재의 휨성능(휨강도와 휨탄성계수)을 20% 향상시킬 수 있었으며, 층재 구성방법에 있어서는 판재의 탄성계수가 높고 품질이 우수한 낙엽송 층재를 외층에 배치하는 방법이 보다 효과적인 것으로 확인되었다. 결론적으로 리기다소나무의 부가가치 증진을 위한 구조용 집성재 이용은 그 가능성이 매우 컸다.
This study was carried out to scrutinize possibility of manufacturing pitch pine (Pinus rigida) glued laminated timber in order to add values of pitch pine trees. Also, it was investigated to improve bending performance of pitch pine glulam. Pitch pine was imported as one of major plantation species in Korean peninsula. Machine stress rated grades of pitch pine lumber mostly ranged between E7 and E9. which grades were more or less inferior to producing high quality glulam. However, the adhesive properties between pitch pine and pitch pine, and between pitch pine and Japanese larch (Larix kaempferi Carr.), such as shear bond strength, wood failure rate and de-lamination rate of bonded layer submerged in cold and boiling water, were higher than Korean Standard criteria. These properties are essential for manufacturing glulam with single species or multiple species. The modulus of rupture (MOR) of pitch pine glulam exceeded the criterion of Korean Standard for glulam strength grade but modulus of elasticity (MOE) was lower than the criterion. On the other hand, the bending performances (MOR and MOE) were improved 20 percent by mixing with Japanese larch laminar. It is effective to arrange higher quality Japanese larch laminar at the outer layer of glulam for improving bending performances. In conclusion, it is possible to use low quality pitch pine as laminar of structural glulam for adding values of pitch pine.