참고문헌
- Christiansen, A., W. R. A. Follensbee, R. A. Geimer, J. A. Koutsky, and G. E. Myers. 1993. Phenol-formaldehyde resin curing and bonding in steam-injection pressing. Part II. Differences between rates of chemical and mechanical responses to resin cure. Holzforschung. 47: 76-82 https://doi.org/10.1515/hfsg.1993.47.1.76
- Christjanson, P., K. Siimer, T. Pehk, and I. Lasn. 2002. Structural changes in urea-formaldehyde resins during storage. Holz als Roh-und Werkstoff. 60(6): 379-384 https://doi.org/10.1007/s00107-002-0326-9
- Chow, S. and P. R. Steiner. 1975. Catalytic, exothermic reactions of urea-formaldehyde resin. Holzforschung. 29(1): 4-10 https://doi.org/10.1515/hfsg.1975.29.1.4
- Dunky, M. 1983. Urea-formaldehyde (UF) adhesive resins for wood. Int. J Adhesion & Adhesives. 18: 95-107
- Ebewele, R. O. 1995. Differential scanning calorimetry and dynamic mechanical analysis of amine-modified urea-formaldehyde adhesives. J Appl. Polym. Sci. 58(10): 1689-1700 https://doi.org/10.1002/app.1995.070581005
- Follensbee, R. A., J. A. Koutsky, A. W. Christiansen, G. E. Myers, and R. L. Geimer. 1993. Development of dynamic mechanical methods to characterize the cure state of phenolic resins. J Appl. Polym. Sci. 47: 1481-1496 https://doi.org/10.1002/app.1993.070470820
- Gu, J. Y., M. Higuchi, M. Morita, and C. Y. Hse. 1995. Synthetic conditions and chemical structures of urea-formaldehyde resins I. Properties of the resins synthesized three different procedures. Mokkuzai Gakkaishi. 41(12): 1115-1121
- Hse, C. Y., Z. Y. Xia, and B. Tomita. 1994. Effects of reaction pH on properties and performance of urea-formaldehyde resins. Holzforschung. 48(6): 527-534 https://doi.org/10.1515/hfsg.1994.48.6.527
- Kim, M. G., W. L.-S. Nieh, and R. M. Meacham. 1991. Study on the curing of phenol-formaldehyde resol resins by dynamic mechanical analysis. Ind. Eng. Chem. Res. 30: 798-803 https://doi.org/10.1021/ie00052a027
- Marutzky, R. In: Wood Adhesives: Chemistry and Technology, Vol. 2. A. Pizzi, Ed., Marcel Dekker Inc., 1986. pp. 307-387
- Myers, G. E. 1983. Formaldehyde emission from particleboard and plywood paneling: measurement, mechanism, and product standards. For. Prod. J. 33(5): 27-37
- Myers, G. E. 1984. How mole ratio of UF resin affects formaldehyde emission and other properties: A literature critique. For. Prod. J. 34(5): 35-41
- Myers, G. E. and K. A. Koutsky. 1987. Procedure for measuring formaldehyde liberation from formaldehyde-based resins. For. Prod. J. 37(9): 56-60
- Myers, G. E. and K. A. Koutsky. 1990. Formaldehyde liberation and cure behavior of ureaformaldehyde resins. Holzforschung. 44(2): 117-126 https://doi.org/10.1515/hfsg.1990.44.2.117
- Myers, G. E. In: Formaldehyde Release from Wood Products, B. Meyer. B. A. K. Andrews, R. M. Reinhardt. Ed., American Chemical Society, 1986, pp. 8-14
- No, B. and M. G. Kim. 2005. Curing of low level melamine-modified urea-formaldehyde particleboard binder resin studied with dynamic mechanical analysis (DMA). J Appl. Polym. Sci. 97: 377-389 https://doi.org/10.1002/app.21759
- Onic, L., V. Bucur, M. P. Ansell, A. Pizzi, X. Deglise, and A. Merlin. 1988. Dynamic thermomechanical analysis as control technique for thermoset bonding of wood joints. Int. J Adhesion and Adhesives. 18: 89-94 https://doi.org/10.1016/S0143-7496(97)00049-3
- Park, B.-D., E. C. Kang, and J. Y. Park. 2006, Effects of formaldehyde to urea mole ratio on thermal curing behavior of urea-formaldehyde resin and properties of particleboard. J of Appl. Polym. Sci. 101(3): 1787-1792 https://doi.org/10.1002/app.23538
- Pizzi, A., L. Lipschitz, and J. Valenzuela. 1994. Theory and practice of the preparation of low formaldehyde emission UF adhesives. Holzforschung. 48(3): 254-261 https://doi.org/10.1515/hfsg.1994.48.3.254
- Que, Z., T. Furuno, S. Katoh, and Y. Nishino. 2007. Effects of urea-formaldehyde resin mole ratio on the properties of particleboard. Building & Environment. 42: 1257-1263 https://doi.org/10.1016/j.buildenv.2005.11.028
- Siimer, K., T. Kaljuvee, and P. Christjanson. 2003. Thermal behaviour of urea-formaldehyde resins during curing. J. Thermal Anal. Calorimetry. 72(2): 607-617 https://doi.org/10.1023/A:1024590019244
- Sundin, B. and P. Hanetho. 1978. Formaldehyde emission from particleboard and other building materials. In: Proc. of 12th International Particleboard Symposium, Washington State University, Pullman, WA, USA. pp. 251-286
- Umemura, K., S. Kawai, Y. Mizuno, and H. Sasaki. 1996. Dynamic mechanical properties of thermosetting resin adhesives II: urea resin. Mokuzai Gakkaishi. 42(5): 489-496
- Young, R. H. 1986. Adhesive cure as determined by dynamic mechanical analysis and its effect on wood composite performance. In: Christiansen, A.W., R. H. Gillespie, G. E. Myers and B. H. Rivers, eds. Wood Adhesives in 1985: status and needs, Proc. of a conference, 1985, May 14-16, Madison, WI USA, Forest Products Research Society, pp. 267-276
- Zeman, S. and L. Tokarova. 1992. Thermogravimetric analysis of urea-formaldehyde polycondensates. Thermochemica Acta. 202: 181-189 https://doi.org/10.1016/0040-6031(92)85162-O