선형모터 정밀 위치제어를 위한 비선형 동적 마찰력 보상기를 갖는 적응 제어기 설계

A Design of Adaptive Controller with Nonlinear Dynamic Friction Compensator for Precise Position Control of Linear Motor System

  • 이진우 (동아대 공대 전기공학과) ;
  • 조현철 (동아대 공대 전기공학과) ;
  • 이영진 (서천항공기능대 계측제어과) ;
  • 이권순 (동아대 공대 전기공학과)
  • 발행 : 2007.05.01

초록

In general mechanical servo systems, friction deteriorates the performance of controllers by its nonlinear characteristics. Especially, friction phenomenon causes steady-state tracking errors and limit cycles in position and velocity control systems, even though gains of controllers are tuned well in linear system model. Even if sensor is used higher accuracy level, it is difficult to improve tracking performance of the position to the same level with a general control method such as PID type. Therefore, many friction models were proposed and compensation methods have been researched actively. In this paper, we consider that the variation of mover's mass is various by loading and unloading. The normal force variation occurs by it and other parameters. Therefore, the proposed control system is composed of main position controller and a friction compensator. A parameter estimator for a nonlinear friction model is designed by adaptive control law and adaptive backstopping control method.

키워드

참고문헌

  1. C. I. Liu, H. Jula, K. Vukadinovic, and P. A. Ioannou, 'Comparing Different Technologies for Containers Movement in Marine Container Terminals,' Intelligent Transportation Systems, 2000. Proceedings. 2000 IEEE, pp. 488-493, 1-3 Oct. 2000 https://doi.org/10.1109/ITSC.2000.881118
  2. Klaus-Peter Franke, 'Boosting Efficiency of Split Marine Container Terminals by Innovative Technology,' IEEE Intelligent Transportation Systems Conference Proc. Oakland, USA, August, pp. 774-779, 2001 https://doi.org/10.1109/ITSC.2001.948758
  3. http://www.noellcranesystems.com/
  4. Brian Armstrong-Helouvry, Pierre Dupont, and Carlos Canudas De Wit, 'A Survey of Models, Analysis Tools and Compensation Methods for the Control of Machines with Friction,' Automatica, Vol. 30, No.7, pp. 1083-1138, 1994 https://doi.org/10.1016/0005-1098(94)90209-7
  5. Armstrong-Helouvry B., 'Stick Slip and Control in Low-speed Motion,' Automatic Control. IEEE Transactions on, Vol. 38, No. 10, pp. 1483-1496, Oct. 1993 https://doi.org/10.1109/9.241562
  6. Armstrong-Helouvry B., Amin B., 'PID Control In The Presence Of Static Friction: Exact And Describing Function Analysis,' American Control Conference, Vol. 1, pp. 597-601, June 29-July 1. 1994 https://doi.org/10.1109/ACC.1994.751810
  7. F. J. Lin, R. J. Wai, and C. M. Hong, 'Hybrid Supervisory Control Using Recurrent Fuzzy Neural Network for Tracking Periodic Inputs,' IEEE Trans. on Neural Networks, Vol. 12, No. 1, January, 2002 https://doi.org/10.1109/72.896797
  8. Rong-Jong Wai, Faa-Jeng Lin, 'Adaptive Recurrent-Neural-Network Control for Linear Induction Motor,' IEEE Trans. on Aerospace and Electronic Systems, Vol. 37, No. 4, pp. 1176-1192, 2001 https://doi.org/10.1109/7.976958
  9. K. Yoshida, H. Takami, X. Kong, and A. Sonoda, 'Mass Reduction and Propulsion Control for a Permanent- Magnet Linear Synchronous Motor Vehicle,' IEEE Trans. on Industry Applications, Vol. 37, No. I, pp. 67-72, 2001 https://doi.org/10.1109/28.903128
  10. Canudas De Wit C., Youssef A., and Nguyen-Phuoc V. T., 'Almost Globally Stable Nonlinear Speed Observer for a Permanent Magnet Synchronous Motor,' Decision and Control, Proceedings of the 41st IEEE Conference on, Vol. I, pp. 136-141, 10-13 Dec. 2002
  11. Canudas de Wit C., Olsson H., Astrom K. J., and Lischinsky P., 'A New Model for Control of Systems with Friction,' Automatic Control, IEEE Transactions on, Vol. 40, No.3, pp. 419-425, March 1995 https://doi.org/10.1109/9.376053
  12. 이진우, 서진호, 이영진, 이권순, 'DR-FNNs를 이용한 리니어 모터 기반 컨테이너 이송시스템의 위치 제어,' 한국항해항만학회지, 제28권, 제6호, pp. 541-548, 2004 https://doi.org/10.5394/KINPR.2004.28.6.541
  13. 이진우, 서진호, 이영진, 이권순, '비선형 마찰력을 갖는 선형 서보계를 위한 질량 추정형 적응 제어기 설계', 대한전기학회논문지, 제54D권, 제7호, pp.428-436, 2005