참고문헌
- 'Climate Change 2007: The Physical Science Basis - Summary for Policymakers,' IPCC, 2007
- 'The Hydrogen Economy,' The National Academy Press, 2004
- M. Richards and A. Shenoy, 'H2-MHR Pre-conceptual Design Summary,' Nucl. Eng. and Technology, 39(1), 2007.2 https://doi.org/10.5516/NET.2007.39.1.001
- J. Norman et al., 'Thermochemical water-splitting cycle bench-scale investigations and process engineering,' GA-A16713, 1982.5
- H. Nakajima et al., 'A study on a closed-cycle hydrogen production by thermochemical water-splitting IS process,' Proc. of ICONE-7, Tokyo, Japan, April 1999
- S. Goldstein et al., 'Upper bound and best estimate of the efficiency of the iodine sulphur cycle,' Int. J. of Hydrogen Energy, 30, 619, 2005 https://doi.org/10.1016/j.ijhydene.2004.06.005
- S. Herring, 'High temperature electrolysis using solid oxide fuel cell technology,' Workshop on Large Scale production of hydrogen from nuclear power, Sandiego, 2002.5
- E. Hoashi et al., 'Simulation modeling of a tubular type solid oxide electrolysis cell for hydrogen production in a nuclear power plant,' ICAPP-06, Reno, NV, 2006.6
- D.F. McLaughlin et al., 'Revised capital and operating HyS hydrogen production cost,' ICAPP-06, Reno, NV, 2006.6
- J.W. Park et al., 'Effects of ion beam mixing of silicon carbide film deposited onto metallic materials for application to nuclear hydrogen production,' Journal of Nuclear Materials, in press. 2007 https://doi.org/10.1016/j.jnucmat.2007.01.129
- J.W. Park et al., Coating and Ion Beam Mixing Apparatus and Method to Enhance the Corrosion Resistance of the Materials at the Elevated Temperature Using the Same, PCT Patent submitted, PCT/KR2006/0042366, 2006
- Y.W. Kim et al., High Temperature and High Pressure Corrosion Resistant Process Heat Exchanger for a Nuclear Hydrogen Production System, R.O.K. Patent submitted 10-2006-0124726, 2006
- S.D. Hong, S.D. et al., 'Design of a Small Scale High Temperature Gas Loop for Process Heat Exchanger Design Tests,' ICAPP-06, Reno, NV, 2006.6
- G.E. Besenbruch, G.E., 'General Atomic Sulfur-Iodine Thermochemical Water-Splitting Process,' Am. Chem. Soc., Div. Pet. Chem., Prepr. 271, 48, 1982
- L.C. Brown, L.C., et al., 'High Efficiency Generation of Hydrogen Fuels Using Nuclear Power,' GA-A24285, 2003.6
- Y.J. Shin, 'Thermal Efficiency of EED-embedded Sulfur-Iodine Thermochemical Cycle,' Calculation Note No. NHDD-KA07-HP-001, 2007.1
- S. Fazluddin et al., 'The Use of Advanced Materials in VHTR's,' 2nd Int. Topical Meeting on High Temperature Reactor Technology, Beijing, China, 2004.9
- W.G. Kim et al., 'Creep Properties of Hastelloy-X Alloy for the High Temperature Gas Cooled Reactor' Key Engineering Materials, vol. 316-328, pp.477-482, 2006
- Moh. Nagah Ramadan, 'Measurement of the Gas-outlettemperatures and the Flow Behavior of Spheres in the Flowing Core of a Pebble-bed Reactor with a New Developed MeasuringSystem,' KFJ Internal Report JUL-1044-RG, Kernforschungsanlage Julich, 1974 (In German)
- W.J. Lee, H. S. Lim, S. W. Lee, and J. Chang, 'Modeling Requirements for VHTR Thermo-Fluid and Safety Analysis Code,' Proceedings of Korea Nuclear Society Fall Meeting,2004
- W.J. Lee, T.Y.C. Wei, R.R. Schultz, et. al, 'Generation of Preliminary PIRT (Phenomena Identification and Ranking Table) for Very High Temperature Gas-Cooled Reactors', KAERI/TR-3050/2005, INL/EXT-05-00829, ANL-GenIV-066, KAERI, 2005.9
- J.M. Noh et. al., 'An Adaptation of the HELIOS/MASTER Code System to the Analysis of VHTR Cores', Trans. of the Korean Nuclear Society Spring Meeting, Chuncheon, Korea, May 2006
- J, M. Noh et. al., 'Development of a Computer Code System for the Analysis of VHTR Cores,' ICAPP-06, Reno, NV, 2006.6
- K.S. Kim et al., 'LIBERTE (Linear Boltzmann Transport Equation Solver for Reactor Physics and Engineering) Methodology', KAERI/TR-2304/2002, KAERI, 2002.11
- K.S. Kim et al., 'Development of Two Step Procedure for the Prismatic VHTR Physics Analysis', PHYSOR2006, Vancouver, Canada, 2006.9
- W.J. Lee, J.J. Jeong, S.W. Lee, and J. Chang, 'Development of MARS-GCR/V1 for Thermal-Hydraulic Safety Analysis of Gas-Cooled Reactor Systems', Nuclear Engineering and Technology, 37(6), 2005
- H.S. Lim and H. C. No, 'GAMMA Multidimensional Multicomponent Mixture Analysis to Predict Air Ingress Phenomena in an HTGR,' Nuclear Science and Engineering, vol. 152, pp. 87-97, Jan. 2006 https://doi.org/10.13182/NSE06-5
- K. Fukuda et al., 'Research and Development of HTTR Coated Particle Fuel' J. Nucl. Sci. Technology 28, 570, 1991 https://doi.org/10.3327/jnst.28.570
- H. Nabielek, et al., 'Development of advanced HTR fuel elements,' Nucl. Eng. Des. 121, 199, 1990 https://doi.org/10.1016/0029-5493(90)90105-7
- C. Tang et al., 'Design and manufacture of the fuel element for the 10 MW high temperature gas-cooled reactor,' X. Ni, Nucl. Eng. Design, 218,91, 2002 https://doi.org/10.1016/S0029-5493(02)00201-7
- K. Sawa, S. Suzuki, S. Shiozawa, 'Safety criteria and quality control of HTTR fuel,' Nucl. Eng. Design, 208, 305, 2001 https://doi.org/10.1016/S0029-5493(01)00358-2
- D. Petti et al., 'Key difference in the Fabrication, Irradiation and Safety Testing of U.S. and German TRISO-coated Particle Fuel and Their Implications on Fuel Performance', INEEL, INEEL Report INEEL/Ext-02-00300, Jun. 2002
- H. Nabielek et al, 'The Performance of High-Temperature Reactor Fuel Particles at Extreme Temperatures,' Nucl. Technol. 84, 62, 1989
- Y. Kurata, K. Ikawa and K. Iwamoto, 'The effect of heat treatment on density and structure of SiC,' J. Nucl. Mater. 92, 351, 1980 https://doi.org/10.1016/0022-3115(80)90122-1
- G.H. Reynolds, J.C. Janvier J.L. Kaae and J.P. Morlevat, 'Irradiation behavior of experimental fuel particles containing chemically vapor deposited zirconium carbide coatings,' J. Nucl. Mater. 62, 9, 1976 https://doi.org/10.1016/0022-3115(76)90279-8
- P. Wagner, 'High Temperature Fuel Technology for Nuclear Process Heat: ZrC-Containing Coated Particle Fuels and High-Density Graphite Fuel Matrices,' Los Alamos NationalLaboratory, Report LA-6984, 1977
- T. Ogawa, K. Ikawa, K. Fukuda, S. Kashimura and K. lwamoto, in Nuclear Fuel Performance, p. 163, BNES, London, 1985
- K. Minato, et al., 'Fission product palladium-silicon carbide interaction in HTGR fuel particles,' J. Nucl. Mater. 172, 184, 1990 https://doi.org/10.1016/0022-3115(90)90437-R
-
T. Ogawa and K. Ikawa, 'Diffusion of metal fission products in
$ZrC_{1.0}$ ,' J. Nucl. Mater. 105, 331 1982 https://doi.org/10.1016/0022-3115(82)90391-9 - R.C. Potter, et al., 'Gas Turbine-Modular Helium Reactor (GTMHR) Conceptual Design Description,' Report 910720, Revision 1, General Atomics, Fuly 1996
- 'Evaluation of High Temperature Gas Cooled Reactor Performance,' IAEA, IAEA-TECDOC-TBD, December 2004
- E. Teuchert, et. al., 'VSOP('94) Computer Code System for Reactor Physics and Fuel Cycle Simulation,' FZJ Internal Report, Juel-2897, 1994
- C.K. Jo and J. M. Noh, 'Preliminary Core Design Analysis of a 200MWth Pebble Bed-type VHTR', Trans. of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 2007
- C.K. Jo, et. al., 'Pre-conceptual Core Design and Safety Analysis of 200MWth Pebble Bed-type VHTR for Hydrogen Production', Intl. Workshop on Next Generation Regional Energy System Development (IWRES07), Seoul, Korea, Jan. 2007
- H.S. Lim, H. C. No, 'GAMMA Multidimensional Multicomponent Mixture Analysis to Predict Air Ingress Phenomena in an HTGR,' Nuclear Science and Engineering, vol. 152, pp. 87-97, Jan. 2006 https://doi.org/10.13182/NSE06-5
- C.H. Kim, S. W. Lee, H. S. Lim and W. J. Lee, 'Preliminary Evaluation of Operational Performance with Two Reactor Design Options for NHDD Application,' Proceedings of Korea Nuclear Society Fall Meeting, 2005
- S.W. Lee, J. J. Jeong and W. J. Lee, 'Preliminary Sensitivity Study on Gas-Cooled Reactor for NHDD System Using MARS-GCR,' Proceedings of Korea Nuclear Society Fall Meeting, 2005
- ASME Section III, Subsection NH, Class 1 Components in Elevated Temperature Service, 2004
- H.S. Lim and W. J. Lee, 'Preliminary Low Pressure Conduction Cooldown Analysis with Sensitivity on the Operating Conditions,' Proceedings of Korea Nuclear Society Fall Meeting, 2005
피인용 문헌
- A Surface Modification of Hastelloy X by a SiC Coating and an Ion Beam Irradiation for a Potential use for Iodine-Sulfur Cycle in Nuclear Hydrogen Production System vol.1125, pp.1946-4274, 2008, https://doi.org/10.1557/PROC-1125-R06-08
- Preliminary application of the draft code case for alloy 617 for a high temperature component vol.22, pp.5, 2008, https://doi.org/10.1007/s12206-008-0118-1
- Computational Fluid Dynamics Assessment of the Local Hot Core Temperature in a Pebble-Bed Type Very High Temperature Reactor vol.131, pp.1, 2009, https://doi.org/10.1115/1.2983136
- Preliminary Design Analysis of Hot Gas Ducts for the Nuclear Hydrogen System vol.131, pp.1, 2009, https://doi.org/10.1115/1.2983141
- Corrosion of the Materials in Sulfuric Acid vol.131, pp.4, 2009, https://doi.org/10.1115/1.3095808
- Production Facility and an Overpressure Prediction Using Correlations and a CFD Analysis for the JAEA Explosion Test in an Open Space vol.166, pp.1, 2009, https://doi.org/10.13182/NT09-A6971
- Evaluation of Creep-Fatigue Damage for Hot Gas Duct Structure of the NHDD Plant vol.132, pp.3, 2010, https://doi.org/10.1115/1.4000728
- Development of the Fission Product Release Analysis Code COPA-FPREL vol.170, pp.1, 2010, https://doi.org/10.13182/NT10-A9461
- An Evaluation of Creep-Fatigue Damage for the Prototype Process Heat Exchanger of the NHDD Plant vol.133, pp.5, 2011, https://doi.org/10.1115/1.4003466
- A Practical Method for Whole-Core Thermal Analysis of a Prismatic Gas-Cooled Reactor vol.177, pp.3, 2012, https://doi.org/10.13182/NT12-A13480
- High-Temperature Structural Analysis of a Small-Scale PHE Prototype under the Test Condition of a Small-Scale Gas Loop vol.2012, pp.1687-6083, 2012, https://doi.org/10.1155/2012/312080
- An improved methodology for determining tensile design strengths of Alloy 617 vol.26, pp.2, 2012, https://doi.org/10.1007/s12206-011-1024-5
- vol.51, pp.9, 2012, https://doi.org/10.1021/ic300014a
- Macroscopic Structural Analysis on a 10 kW Class Lab-Scale Process Heat Exchanger Prototype under a High-Temperature Gas Loop Condition vol.05, pp.01, 2013, https://doi.org/10.4236/eng.2013.51A017
- Hydrogen production using high temperature reactors: an overview vol.1, pp.1, 2013, https://doi.org/10.12989/eri.2013.1.1.013
- Structural Integrity Evaluation of a Lab-Scale PCHE Prototype under the Test Conditions of HELP vol.2013, pp.1687-6083, 2013, https://doi.org/10.1155/2013/520145
- Comparative study on the high-temperature tensile and creep properties of Alloy 617 base and weld metals vol.27, pp.8, 2013, https://doi.org/10.1007/s12206-013-0616-7
- Improved methodology for determining tensile elastic and plastic strain components of alloy 617 vol.28, pp.8, 2014, https://doi.org/10.1007/s12206-014-0709-y
- Analysis of thermophysical property data of HI x components for I2 crystallizer design in sulfur-iodine process to produce hydrogen vol.33, pp.3, 2016, https://doi.org/10.1007/s11814-015-0212-x
- Macroscopic High-Temperature Structural Analysis Model of Small-Scale PCHE Prototype (II) vol.35, pp.9, 2011, https://doi.org/10.3795/KSME-A.2011.35.9.1137
- High-Temperature Structural Analysis of a Small-Scale Prototype of a Process Heat Exchanger (IV) - Macroscopic High-Temperature Elastic-Plastic Analysis - vol.35, pp.10, 2011, https://doi.org/10.3795/KSME-A.2011.35.10.1249
- Macroscopic High-Temperature Structural Analysis Model for a Small-Scale PCHE Prototype (I) vol.35, pp.11, 2011, https://doi.org/10.3795/KSME-A.2011.35.11.1499
- Comparisons of High-Temperature Structural Analysis Results on the Medium-Scale PHE Prototype under the Steady-State and Trip Conditions of a Small-Scale Gas Loop vol.525-526, pp.1662-9795, 2012, https://doi.org/10.4028/www.scientific.net/KEM.525-526.5
- Size Effect of PHE Prototype on High-Temperature Structural Integrity vol.525-526, pp.1662-9795, 2012, https://doi.org/10.4028/www.scientific.net/KEM.525-526.461
- High-Temperature Structural Analysis on the Small-Scale PHE Prototype vol.525-526, pp.1662-9795, 2012, https://doi.org/10.4028/www.scientific.net/KEM.525-526.465
- Macroscopic High-Temperature Structural Analysis of PHE Prototypes Considering Weld Material Properties vol.36, pp.9, 2012, https://doi.org/10.3795/KSME-A.2012.36.9.1095
- High-Temperature Structural Analysis of a Small-Scale PHE Prototype - Analysis Considering Material Properties in Weld Zone - vol.36, pp.10, 2012, https://doi.org/10.3795/KSME-A.2012.36.10.1289
- High-Temperature Structural Analysis of a Medium-Scale Process Heat Exchanger Prototype vol.36, pp.10, 2012, https://doi.org/10.3795/KSME-A.2012.36.10.1283
- Evaluation of Elastic Structural Integrity of a 70 kW Class Lab-Scale PCHE Prototype under the Test Conditions of HELP vol.577-578, pp.1662-9795, 2013, https://doi.org/10.4028/www.scientific.net/KEM.577-578.333
- Evaluation of High-Temperature Structural Integrity Using Lab-Scale PCHE Prototype vol.37, pp.9, 2013, https://doi.org/10.3795/KSME-A.2013.37.9.1189