References
- Lee, H., Lee, J. H. and Pharr, G. M., 2005,'A Numerical Approach to Spherical Indentation Technique for Material Property Evaluation,' Journal of the Mechanics and Physics of Solids, Vol. 53, pp. 2037-2069 https://doi.org/10.1016/j.jmps.2005.04.007
- Knapp, J. A., Follstaedt, D. M., Myers, S. M., Barbour, J. C. and Friedmann, T. A., 1999, 'Finite Element Modeling of Nano-indentation,' Journal of Applied Physics, Vol. 85 (3), 1460-474 https://doi.org/10.1063/1.369178
- Huber, N. and Tsakmakis, C., 1999, 'Determination of Constitutive Properties from Spherical Indentation Data Using Neural Networks. Part I: The Case of Pure Kinematic Hardening in Plasticity Laws,' Journal of the Mechanics and Physics of Solids, Vol. 47, pp. 1569-1588 https://doi.org/10.1016/S0022-5096(98)00109-4
- Huber, N. and Tsakmakis, C., 1999, 'Determination of Constitutive Properties from Spherical Indentation Data Using Neural Networks. Part II: Plasticity with Nonlinear Isotropic and Kinematic Hardening,' Journal of the Mechanics and Physics of Solids, Vol. 47, pp. 1589-1607 https://doi.org/10.1016/S0022-5096(98)00110-0
- Nayebi, A., Abdi, R. E. Bartier, O. and Mauvoisin, G., 2002, 'New Procedure to Determine Steel Mechanical Parameters from the Spherical Indentation Technique,' Mechanics of Materials, Vol. 34, pp. 243-254 https://doi.org/10.1016/S0167-6636(02)00113-8
- Dao, M., Chollacoop, N., Vliet, J. V., Venkatesh, T. A. and Suresh, S., 2001, 'Computational Modeling of the Forward and Reverse Problems in Instrumented Sharp Indentation,' Acta Materialia, Vol. 49, pp. 3899-3918 https://doi.org/10.1016/S1359-6454(01)00295-6
- Cao, Y. P. and Lu. J., 2004, 'A New Method to Extract the Plastic Properties of Metal Materials from an Instrumented Spherical Indentation Loading Curve,' Acta Materialia, Vol. 52, pp. 4023-4032 https://doi.org/10.1016/j.actamat.2004.05.018
- Lee, J. H., 2006, A Numerical Approach and Experimental Verification of the Indentation Techniques for Material Property and Residual Stress Evaluation, Ph. D. Thesis, Department of Mechanical Engineering, Sogang University
- ABAQUS User's Manual, 2004, Version 6.5, Hibbitt, Karlsson and Sorensen, Inc., Pawtucket, RI
- Rice, J. R. and Rosengren, G. F., 1968,'Plane Strain Deformation Near a Crack-tip in a Power Law Hardening Material,' Journal of the Mechanics and Physics of Solids, Vol. 16, pp. 1-12 https://doi.org/10.1016/0022-5096(68)90013-6
- Sneddon, I. N., 1965, 'The Relaxation between Load and Penetration in the Axisymmetric Boussinesq Problem for a Punch of Arbitrary Profile,' International Journal of Engineering Science, Vol. 3, pp. 47-57 https://doi.org/10.1016/0020-7225(65)90019-4
- Pharr, G. M., Oliver, W. C. and Brotzen, F. R., 1992, 'On the Generality of the Relationship among Contact Stiffness, Contact Area and Elastic Modulus during Indentation,' Journal of Materials Research, Vol. 7, pp. 613-617 https://doi.org/10.1557/JMR.1992.0613
Cited by
- A Dual Triangular Pyramidal Indentation Technique Based on FEA Solutions for Material Property Evaluation vol.36, pp.1, 2012, https://doi.org/10.3795/KSME-A.2012.36.1.017
- A Conical Indentation Technique Based on FEA Solutions for Property Evaluation vol.33, pp.9, 2009, https://doi.org/10.3795/KSME-A.2009.33.9.859