신개발 유두컵 라이너용 고무조성물의 물리적 특성 조사

Study on the Physical Properties of New Developed Teat Cup Liner Compounds

  • Lee, Jeong-Chi (Department of Veterinary Nurse and Peta Sciences, Seojeong College)
  • 발행 : 2007.06.30

초록

The teat cup liner compounds with improved physical property were developed using tri-polymer blend of natural rubber(NR), ethylene propylene diene monomer rubber(EPDM) and butyl rubber, and the changes of the physical properties of compounds were measured under various conditions such as standard, thermal, alkaline detergent and acid solutions aging conditions. The hardness of the new teat cup liner compound 1 was 50 and that of the compound 2 was 51 under standard condition. The tensile strength and elongation of the new compound 1 were $154kgf/cm^2$ and 675% under the standard condition, respectively. Also, those of the new compound 2 were 180 kgf/cm and 634% under the same condition. Their hardness were increased about $2{\sim}6%$ and the tensile strength and elongation were decreased about 10% under the $25^{\circ}C$ water and detergent solutions. Even though the new teat cup liner compounds exhibited so much decreased tensile properties under the $105^{\circ}C$ thermal aged condition, they sustained more stable aged physical properties including tensile strength and elongation than those of imported teat cup liner materials. Consequently, the new teat cup liner compounds would give prolonged lift cycle if they are used as a teat cup liner product.

키워드

참고문헌

  1. Dick JS. Rubber Technology(Compounding and Testing for Performance). Ohio: Hanser Gardner Publications. 2001: 126-139
  2. Gent AN. Engineering with Rubber(How to Design Rubber Components), Rubber Division of the American Chemical Society. New York: Oxford University Press. 1992: 13-17
  3. Magee C, Sagi R, Scott NR, Gates RS. Bacterial transport within and among various teat cup and cluster assemblies during milking. J Dairy Sci 1984; 67: 2034-2040 https://doi.org/10.3168/jds.S0022-0302(84)81540-4
  4. Mark JE, Erman B , Eirich FR. Science and Technology of Rubber. 2nd ed. San Diego, California: Academic press. 1994: 420-432
  5. McDonald JS. Effect of milking machine design and function on new intramammary infection. J Milk Food Technol 1975; 38: 44-5 1 https://doi.org/10.4315/0022-2747-38.1.44
  6. Medalia AI. Heat generation in elastomer compounds: causes and effects(review). Rubber Chern and Technol 1991; 64: 481-492 https://doi.org/10.5254/1.3538565
  7. Mein GA, Williams DM, Thiel CC. Compressive load applied by the teat cup liner to the bovine teat. J Dairy Res 1987; 54: 327-337 https://doi.org/10.1017/S0022029900025504
  8. Park BH, Jung IG, Park SS. Effect of various cross-liking types on the physical propetties in carbon black-filled natural rubber compound. Polymer-Korea 2001; 25: 63-70
  9. Spencer SB, Jones LR. Liner wall movement and vacuum measured by data acquisition. J Dairy Sci 2000; 83: 11101114 https://doi.org/10.3168/jds.S0022-0302(00)74976-9
  10. 국립수의과학검역원. 착유기 관리 기술서. 안양: 건양인쇄사. 2002: 66-69
  11. 이범철, 이성훈, 송한종 고무재료 가이드. 1판. 서울. 배문사. 2001: 95-153
  12. 이정치, 박형련, 김명선, 이정길, 이채용. 유두컵 라이너의 물리화학적 특성 조사. 한국임상수의학회지 2005; 22: 100-107